Dodge Airaid Cold Air Intake Information

AIRAID MXP SERIES COLD AIR INTAKE SYSTEM

Airaid's MXP Series cold air intake system features a large one-piece rotational molded air box to keep heat away from the intake, while the totally redesigned air intake tube made from cross-linked high density polyethylene maintains mass air flow readings for functionality and correct air-fuel ratio. Its high flow air filter delivers maximum air flow and filtration. It has an inner and outer layer of wire mesh that guarantees overall durability. Guaranteed to last the life of the vehicle. Retains all factory sensors.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Cold air dam included
• Black tube finish
• Plastic tube material

Features

• Provides power up to 12 to 18 h.p.
• Up to 820 CFM
• Up to 99.99% filtration efficiency
• Washable and reusable air filter
• Made in U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-609-4. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: Airaid MXP

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86300237

AIRAID COLD AIR DAM INTAKE SYSTEM

Airaid's Cold Air Dam intake system is designed to produce optimum performance by isolating engine heat away from air intake. It uses the stock air filter location but gives it a boost with a huge air inlet to keep more cold air flowing. Its heat shield is powdercoated inside and out for maximum air flow and corrosion protection.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Cold air dam, scoop, and mounting hardware included
• Black tube finish
• Plastic tube material

Features

• Up to 100% filtration efficiency
• Washable and reusable air filter
• Made in U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-609-2. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: Airaid Cold air dam

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86350193

AIRAID MXP SERIES COLD AIR INTAKE SYSTEM

Airaid's MXP Series cold air intake system features a large one-piece rotational molded air box to keep heat away from the intake, while the totally redesigned air intake tube made from cross-linked high density polyethylene maintains mass air flow readings for functionality and correct air-fuel ratio. Its high flow air filter delivers maximum air flow and filtration. It has an inner and outer layer of wire mesh that guarantees overall durability. Guaranteed to last the life of the vehicle. Retains all factory sensors.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Black tube finish
• Plastic tube material

Features

• Provides power up to 23 h.p. and 33 lb.-ft. of torque
• Up to 100% filtration efficiency
• Washable and reusable air filter
• Made in U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-609-4. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: Airaid MXP

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86300259

AIRAID QUICKFIT INTAKE SYSTEM

Airaid's QuickFit intake system is specifically designed to get more out of an engine using the vehicle's stock cold-air inlet and filter housing and augment it with a washable and reusable Airaid air filter for optimum filtration. It features an exclusive design that feeds air directly into the intake system and isolates hot air from the filter for a denser charge.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Without tube

Features

• Washable and reusable air filter
• Made in U.S.A.

Notes

• Without intake tube
• Product legal for sale in California under Executive Order (EO) number D-609-2. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: Airaid QuickFit

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86300128

AIRAID CLASSIC INTAKE SYSTEM

Airaid's Classic intake system is designed to add a new spin to vehicles with limited air flow to the original filter location. Its high flow air filter delivers exceptionally high filtration and its mandrel-bent powdercoated stainless steel intake tube moves the air inlet to a better location optimizing air flow at the drop of the throttle.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Mounting hardware included
• Gray tube finish
• Stainless steel tube material

Features

• Provides power up to 12-18 h.p.
• Up to 820 CFM
• Up to 99.99% filtration efficiency
• Mandrel-bent tubing
• Washable and reusable air filter
• Made in U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-609-4. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: Airaid Classic

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86300107

AIRAID MXP SERIES COLD AIR INTAKE SYSTEM -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; 99 percent filtration efficiency rate; Includes air filter, stylized tri-lobe design black intake tube, heat shield and all the parts necessary for easy installation; Features a large one-piece rotational molded air box to keep heat away from the intake, while the totally redesigned air intake tube made from cross-linked high density polyethylene maintains mass air flow readings for functionality and correct air-fuel ratio; Its Airaid Synthamax air filter is made of two distinct layers of specifically designed synthetic materials for maximum air flow and filtration; Has an inner and outer layer of wire mesh that guarantees overall durability; Dry element; Washable and reusable; Made in USA; Guaranteed to last the life of the vehicle; Retains all factory sensors.

Series: Airaid MXP

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Sold individually

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86301237

AIRAID COLD AIR DAM INTAKE SYSTEM -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; 99 percent filtration efficiency rate; Includes air filter, black intake tube, heat shield, air filter adapter and all the parts necessary for easy installation; Designed to produce optimum performance by isolating engine heat away from air intake; It uses the stock air filter location but gives it a boost with a huge air inlet to keep more cold air flowing; Features Synthamax air filter with 360-degree conical style and is made of two distinct layers of specifically designed synthetic materials for exceptionally high filtration; Dry element; Washable and reusable; Its heat shield is powdercoated inside and out for maximum air flow and corrosion protection; Has an intake tube made of cross-linked high density polyethylene; Seals directly to the hood; Made in USA.

Series: Airaid Cold air dam

Type: Direct fit, 50-state legal

Quantity Sold: Sold individually

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86301220

AIRAID COLD AIR DAM INTAKE SYSTEM

Airaid's Cold Air Dam intake system is designed to produce optimum performance by isolating engine heat away from air intake. It uses the stock air filter location but gives it a boost with a huge air inlet to keep more cold air flowing. Its heat shield is powdercoated inside and out for maximum air flow and corrosion protection.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Made in U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-609-4. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: Airaid Cold air dam

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86300220

AIRAID COLD AIR DAM INTAKE SYSTEM

Airaid's Cold Air Dam intake system is designed to produce optimum performance by isolating engine heat away from air intake. It uses the stock air filter location but gives it a boost with a huge air inlet to keep more cold air flowing. Its heat shield is powdercoated inside and out for maximum air flow and corrosion protection.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Cold air dam and mounting hardware included
• Black tube finish
• Plastic tube material

Features

• Provides power up to 12 h.p. and 13 lb.-ft. of torque
• Up to 100% filtration efficiency
• Washable and reusable air filter
• Made in U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-609-2. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: Airaid Cold air dam

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86350199

AIRAID MXP SERIES COLD AIR INTAKE SYSTEM

Airaid's MXP Series cold air intake system features a large one-piece rotational molded air box to keep heat away from the intake, while the totally redesigned air intake tube made from cross-linked high density polyethylene maintains mass air flow readings for functionality and correct air-fuel ratio. Its high flow air filter delivers maximum air flow and filtration. It has an inner and outer layer of wire mesh that guarantees overall durability. Guaranteed to last the life of the vehicle. Retains all factory sensors.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Cold air dam and mounting hardware included
• Without tube

Features

• Provides power up to 12 to 18 h.p.
• Up to 820 CFM
• Up to 100% filtration efficiency
• Washable and reusable air filter
• Made in U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-609-4. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: Airaid MXP

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86300236