Ford Airaid Cold Air Intake Information

AIRAID COLD AIR DAM INTAKE SYSTEM

Airaid's Cold Air Dam intake system is designed to produce optimum performance by isolating engine heat away from air intake. It uses the stock air filter location but gives it a boost with a huge air inlet to keep more cold air flowing. Its heat shield is powdercoated inside and out for maximum air flow and corrosion protection.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Black tube finish
• Plastic tube material

Features

• Provides power up to 9 h.p.
• Up to 820 CFM
• Up to 100% filtration efficiency
• Washable and reusable air filter
• Made in U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-609-2. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: Airaid Cold air dam

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86400162

AIRAID CLASSIC INTAKE SYSTEM

Airaid's Classic intake system is designed to add a new spin to vehicles with limited air flow to the original filter location. Its high flow air filter delivers exceptionally high filtration and its mandrel-bent powdercoated stainless steel intake tube moves the air inlet to a better location optimizing air flow at the drop of the throttle.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Mounting hardware included
• Black tube finish
• Plastic tube material

Features

• Provides power up to 12-18 h.p.
• Up to 820 CFM
• Up to 100% filtration efficiency
• Mandrel-bent tubing
• Washable and reusable air filter
• Made in U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-609-2. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: Airaid Classic

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86400115

AIRAID MXP SERIES COLD AIR INTAKE SYSTEM -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; SAE test-proven to have 99.997 percent filtration efficiency, which means it captures nearly twice the percentage of 2 micron particulates and more than 6 times the amount of 0.5 micron particulates than other performance filters on the market; Up to 820 CFM; Includes premium air filter, powdercoated black intake tube, and all the parts necessary for easy installation; Features a large one-piece rotational molded air box to keep heat away from the intake, while the totally redesigned air intake tube made from cross-linked high density polyethylene maintains mass air flow readings for functionality and correct air-fuel ratio; Its Airaid Premium Air Filter has computer designed pleat depth and count to ensure maximum air flow and filtration; This air filter also features an exclusive synthaflow technology combined with surgical quality cotton gauze and durable epoxy-coated wire mesh for layers of filtration performance; Made in the USA.

Series: Airaid MXP

Type: Direct fit, 50-state legal

Quantity Sold: Sold individually

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86450264

AIRAID COLD AIR DAM INTAKE SYSTEM

Airaid's Cold Air Dam intake system is designed to produce optimum performance by isolating engine heat away from air intake. It uses the stock air filter location but gives it a boost with a huge air inlet to keep more cold air flowing. Its heat shield is powdercoated inside and out for maximum air flow and corrosion protection.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Made in U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-609-2. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: Airaid Cold air dam

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Airaid no-hassle warranty

Part #: A864001402

AIRAID COLD AIR DAM INTAKE SYSTEM

Airaid's Cold Air Dam intake system is designed to produce optimum performance by isolating engine heat away from air intake. It uses the stock air filter location but gives it a boost with a huge air inlet to keep more cold air flowing. Its heat shield is powdercoated inside and out for maximum air flow and corrosion protection.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Mounting hardware included
• Black tube finish
• Plastic tube material

Features

• Provides power up to 12 to 18 h.p.
• Up to 820 CFM
• Up to 99.99% filtration efficiency
• Washable and reusable air filter
• Made in U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-609-5. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: Airaid Cold air dam

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Airaid no-hassle warranty

Part #: A864002141

AIRAID MXP SERIES COLD AIR INTAKE SYSTEM

Airaid's MXP Series cold air intake system features a large one-piece rotational molded air box to keep heat away from the intake, while the totally redesigned air intake tube made from cross-linked high density polyethylene maintains mass air flow readings for functionality and correct air-fuel ratio. Its high flow air filter delivers maximum air flow and filtration. It has an inner and outer layer of wire mesh that guarantees overall durability. Guaranteed to last the life of the vehicle. Retains all factory sensors.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Cold air dam and mounting hardware included
• Black tube finish
• Plastic tube material

Features

• Provides power up to 15 h.p. and 18 lb.-ft. of torque
• Up to 820 CFM
• Up to 100% filtration efficiency
• Washable and reusable air filter
• Made in U.S.A.

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Series: Airaid MXP

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86450238

AIRAID COLD AIR DAM INTAKE SYSTEM -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; 99 percent filtration efficiency rate; Includes air filter, black intake tube, heat shield and all the parts necessary for easy installation; Designed to produce optimum performance by isolating engine heat away from air intake; It uses the stock air filter location but gives it a boost with a huge air inlet to keep more cold air flowing; Features Synthamax air filter with 360-degree conical style and is made of two distinct layers of specifically designed synthetic materials for exceptionally high filtration; Dry element; Washable and reusable; Its heat shield is powdercoated inside and out for maximum air flow and corrosion protection; Has an intake tube made of cross-linked high density polyethylene; Seals directly to the hood; Made in USA.

Series: Airaid Cold air dam

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Sold individually

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86401272

AIRAID COLD AIR DAM INTAKE SYSTEM -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; SAE test-proven to have 99.997 percent filtration efficiency, which means it captures nearly twice the percentage of 2 micron particulates and more than 6 times the amount of 0.5 micron particulates than other performance filters on the market; Up to 820 CFM; Includes air filter, black intake tube, heat shield, and all the parts necessary for easy installation; Features washable and reusable air filter with 360-degree conical style and is made of unique nano-fiber combined with multiple layers of surgical-quality cotton gauze; Its heat shield is powdercoated inside and out for maximum air flow and corrosion protection; Has an intake tube made of cross-linked high density polyethylene; Designed to produce optimum performance for your car's engine by isolating engine heat away from air intake; Uses the stock air filter location but provides a boost with a huge air inlet to keep more cold air flowing; Made in USA.

Series: Airaid Cold air dam

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Sold individually

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86400272

AIRAID COLD AIR DAM INTAKE SYSTEM

Airaid's Cold Air Dam intake system is designed to produce optimum performance by isolating engine heat away from air intake. It uses the stock air filter location but gives it a boost with a huge air inlet to keep more cold air flowing. Its heat shield is powdercoated inside and out for maximum air flow and corrosion protection.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Made in U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-609-2. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: Airaid Cold air dam

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86400217

AIRAID COLD AIR DAM INTAKE SYSTEM

Airaid's Cold Air Dam intake system is designed to produce optimum performance by isolating engine heat away from air intake. It uses the stock air filter location but gives it a boost with a huge air inlet to keep more cold air flowing. Its heat shield is powdercoated inside and out for maximum air flow and corrosion protection.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Mounting hardware included
• Black tube finish
• Plastic tube material

Features

• Provides power up to 12 to 18 h.p.
• Up to 820 CFM
• Up to 99.99% filtration efficiency
• Washable and reusable air filter
• Made in U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-609-4. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: Airaid Cold air dam

Type: Direct fit, 50-state legal

Quantity Sold: Sold individually

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86450234