Jeep AutoTrust Platinum Exhaust Manifold Information

MAGNAFLOW EXHAUST SYSTEM

Magnaflow's exhaust system is made of 100 percent tough and durable stainless steel. It is dyno tested and proven to increase horsepower and torque while its mandrel-bent tubing provides better exhaust flow for optimum performance. Delivers a smooth and deep exhaust tone. Nothing performs better, looks better, or sounds better than Magnaflow performance exhaust.

Specifications

• Cat-back exhaust system
• Split rear exit
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Dual inlet and outlet muffler configuration
• One muffler
• Dual 3.5 in. polished stainless steel tips with round shape, angle cut, and rolled edge design

Features

• Mandrel-bent tubing

Notes

• 50-state legal
• Weld-on attachment style

Finish: Natural

Material: Stainless steel

Series: Magnaflow Performance

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Magnaflow limited warranty

Part #: M6616487

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Split rear exit
• 3 in. main piping diameter
• 2 in. tail pipe diameter
• Single inlet and dual outlet muffler configuration
• One muffler
• Dual 3.5 in. polished stainless steel tips with round shape, angle cut, and intercooled, rolled edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Natural

Material: Stainless steel

Series: Borla Performance

Type: Direct fit, 50-state legal

Exit: Split rear

Tip Shape: Round

Tip Style: Intercooled

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2514999

BORLA UNIVERSAL HOT ROD KIT

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Header-back exhaust system
• Dual rear exit
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Two mufflers
• Dual 3 in. polished stainless steel tips with round shape, straight cut, and phantom edge design

Features

• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Polished

Material: Stainless steel

Series: Borla Universal Hot Rod

Type: Universal product, 50-state legal

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2510512

GIBSON DUAL SPORT CAT-BACK EXHAUST SYSTEM, 409L STAINLESS STEEL, NATURAL FINISH -- 50-state legal; Gains an average power of 10 to 15 h.p.; 3 in. main piping diameter, 3 in. tail pipe diameter; Exit in stock location; Two mufflers with dual inlet and outlet configuration each; Includes fully welded Superflow CFT mufflers for better volume efficiency, pipes, zinc plated 0.375-0.5 in. thick factory style hangers, heavy duty clamps, bolt kits, and dual 4 in. high polished T-304 stainless steel tips with round shape, angle cut, and intercooled design; Features quality and heavy duty 409L stainless steel mandrel-bent tubing to maintain constant exhaust flow for outstanding performance; Provides a powerful aggressive deep exhaust tone; Dyno tested to assure an increase in horsepower and torque; Improves fuel economy as engine become more fuel efficient; Easy clamp-on installation.

Finish: Natural

Material: Stainless steel

Series: Gibson Dual Sport

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Gibson limited warranty

Part #: G27617405

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Single rear exit
• 2.25 in. main piping diameter
• Single inlet and outlet muffler configuration
• One muffler
• Single 4 in. polished stainless steel tip with round shape, angle cut, and rolled edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Natural

Material: Stainless steel

Series: Borla Performance

Type: Direct fit, 50-state legal

Exit: Rear

Tip Shape: Round

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2514836

DYNOMAX DUAL EXHAUST SYSTEM

Dynomax's exhaust system is designed to deliver maximum horsepower, torque and superior exhaust flow. Its mandrel-bent tubing provides smooth and unrestricted flow that helps the entire system perform efficiently.

Specifications

• Cat-back exhaust system
• Split side exit
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Dual inlet and outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Dual 3 in. polished stainless steel tips with round shape, angle cut, and non-rolled edge design

Features

• 11 h.p. and 15 lb.-ft. of torque
• Mandrel-bent tubing

Notes

• 50-state legal
• Clamp-on attachment style

Finish: Natural

Material: Stainless steel

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Part #: D2239471

MBRP INSTALLER SERIES SINGLE EXHAUST SYSTEM

MBRP's Installer series exhaust system delivers maximum horsepower, exhaust flow, torque and the lowest exhaust gas temperature possible. Made of 100 percent heavy gauge aluminized steel for long lasting durability. Its maximum tube diameter, reduced band degree angles and smooth mandrel-bent tubing provides better exhaust flow for optimum performance. Delivers a rich and mellow exhaust tone.

Specifications

• Cat-back exhaust system
• Single side exit
• Single inlet and outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Single black stainless steel tip with round shape, angle cut, and rolled edge design

Features

• Improves fuel economy by 1 to 2 MPG
• Mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Black

Material: Aluminized steel

Series: MBRP Installer

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: 3-year MBRP warranty

Part #: M79S5516BLK

MBRP XP SERIES SINGLE EXHAUST SYSTEM

MBRP's XP series exhaust system is a rugged and dependable performance choice for enthusiast. Its is made of T409 stainless steel for long lasting durability and designed to withstand the harshest road conditions. Minimizing backpressure and improves throttle response, this system provides maximum tube diameter, reduced band degree angles and smooth mandrel-bent tubing that provides better exhaust flow for optimum performance. Delivers a rich and mellow exhaust tone.

Specifications

• Cat-back exhaust system
• Single rear exit
• Single inlet and outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Single polished stainless steel tip with round shape, straight cut, and rolled edge design

Features

• Improves fuel economy by 1 to 2 MPG
• T-409 stainless steel tubing
• Mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Natural

Material: Stainless steel

Series: MBRP XP

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime MBRP limited warranty

Part #: M79S5516409

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Features

• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal

Finish: Natural

Material: Stainless steel

Type: Direct fit, 50-state legal

Exit: Rear

Tip Shape: Square

Tip Style: Angle Cut Phantom

Quantity Sold: Assembly

Part #: B25140103

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Single rear exit
• 2.25 in. main piping diameter
• 2 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Single 3.8 x 3 in. polished stainless steel tip with square shape, angle cut, and intercooled edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Natural

Material: Stainless steel

Series: Borla Performance

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B25140071