Audi Boge Strut Assembly Information

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Dual rear exit
• 2.25 in. main piping diameter
• 2.25 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• Two mufflers
• Dual 2.9 in. polished stainless steel tips with round shape, angle cut, and rolled edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Natural

Material: Stainless steel

Series: Borla Performance

Type: Direct fit, 50-state legal

Exit: Rear

Tip Shape: Round

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2514845

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Split rear exit
• 2.25 in. main piping diameter
• 2.25 in. tail pipe diameter
• Single inlet and dual outlet muffler configuration
• One muffler
• Dual 4.25 x 3.5 in. polished stainless steel tips with oval shape, angle cut, and rolled edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Natural

Material: Stainless steel

Series: Borla Performance

Type: Direct fit, 50-state legal

Exit: Split rear

Tip Shape: Oval

Tip Style: Rolled Angle Cut

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2514951

BORLA UNIVERSAL HOT ROD KIT

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Header-back exhaust system
• Dual rear exit
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Two mufflers
• Dual 3 in. polished stainless steel tips with round shape, straight cut, and phantom edge design

Features

• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Polished

Material: Stainless steel

Series: Borla Universal Hot Rod

Type: Universal product, 50-state legal

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2510512

INJEN RACE DIVISION COLD AIR INTAKE

Injen's Race Division cold air intake is a race tuned air intake system designed for enthusiasts wanting mid-range power. Its intake tube is strategically placed behind the front bumper to accumulate colder and denser air resulting to massive performance gains while maintaining the factory air and fuel mixture safe.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Polished tube finish
• 6061 T-6 aluminum tube material

Notes

• Product legal for sale in California under Executive Order (EO) number D-476-4. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
• Fine-tuned for specific applications

Series: Injen IS

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Injen limited warranty

Part #: I24RD3025P

AEM COLD AIR INDUCTION SYSTEM -- Up to 99.52 percent filtration efficiency; Includes gunmetal gray intake tube, gray synthetic air filter, steel powdercoated heat shield, and a complete mounting kit with comprehensive installation instructions for a perfect fit; Engineered to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment; Features Dryflow Synthetic Air Filter that is proven to be highly efficient in fine dust testing, filtering dirt as small as one micron; Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability; Manufactured and assembled in the USA. Product legal for sale in California under Executive Order (EO) number D-670. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime AEM limited warranty

Part #: A1821681C

AFE MAGNUM FORCE STAGE 1 XP COLD AIR INTAKE SYSTEM -- 50-state legal; XL canister; Provides additional power up to 21 h.p. and 36 lb.-ft. at 5300 RPM torque; Increases airflow up to 50 percent; Includes Pro Guard 7 air filter that is made of patented seven layers of media that consists of five layers of cotton gauze and two layers of random porosity, 3-angle velocity stack adapter, adjustable ram-scoop, durable cover that allows great seal against all conditions, and dzus fasteners for easy filter access; Universal off-road canister; Replaces OE air filter with a revolutionary Pro-Dry S filter that provides maximum protection against extreme dirt and dust conditions; Delivers aggressive performance sound; Trim sealed or covered to seal out hot engine air; Features washable and reusable filter that comes with the industry's deepest pleats for greater flow and dust holding capacity; Pre-positioned opening for stock attachments to avoid dangling wires and relocating of hoses or tubes; For use in off-road applications.

Series: AFE Magnum force stage 1 XP

Type: Minor modifications required, 50-state legal

Quantity Sold: Assembly

Warranty: 2-year AFE limited warranty

Part #: A157511061

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AL

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AS

CV AXLE ASSEMBLY, NEW -- Includes axle nut, joints, and boots; Manufactured from 100 percent new components to ensure proper fit and operation; Provides maximum safety and stability, restores vehicle's handling and control, and improves passenger comfort over the toughest and roughest driving conditions; Backed by 1-year, unlimited-mileage warranty.

Location: Front, Passenger Side

Condition: New

Quantity Sold: Sold individually

Warranty: 1-year, unlimited-mileage warranty

Part #: ARBV507102

EDELBROCK PERFORMER RPM CAMSHAFT, FOR CHEVY V8 SMALL BLOCK ENGINES ONLY -- 234 intake/244 exhaust duration at 0.50 in. lift, 308 intake/318 exhaust advertised duration, 0.488 in. intake/0.510 in. exhaust valve lift, 0.325 in. intake/0.340 in. exhaust camshaft lift, 10 degrees BTDC open/44 degrees BTDC close intake timing at 0.050 in., 59 degrees BBDC open/5 degrees ATDC close exhaust timing at 0.050 in., 112 degrees lobe separation/107 degrees centerline intake, 1,500-6,500 operating RPM range, hydraulic flat tappet camshaft/lifter style; Includes assembly lubricant; Does not include valve springs, retainers, locks, valve stem seals, timing chain and gears, pushrods, rocker arms, and gaskets; Designed with more lift and duration for more aggressive street performance applications; Dyno-matched to Performer RPM manifolds for high-rpm horsepower while maintaining acceptable low-end torque; Not legal for sale or use on pollution-controlled motor vehicles.

Quantity Sold: Assembly

Warranty: 90-day Edelbrock limited warranty

Part #: E117102