Toyota Bosal Exhaust System Information

MAGNAFLOW EXHAUST SYSTEM

Magnaflow's exhaust system is made of 100 percent tough and durable stainless steel. It is dyno tested and proven to increase horsepower and torque while its mandrel-bent tubing provides better exhaust flow for optimum performance. Delivers a smooth and deep exhaust tone. Nothing performs better, looks better, or sounds better than Magnaflow performance exhaust.

Specifications

• Cat-back exhaust system
• Dual rear exit
• 2.5 in. main piping diameter
• Dual inlet and outlet muffler configuration
• One muffler
• Dual 3.5 in. polished stainless steel tips with round shape, straight cut, and rolled edge design

Features

• 10% increase in horsepower
• Mandrel-bent tubing

Notes

• 50-state legal
• Weld-on attachment style

Finish: Natural

Material: Stainless steel

Series: Magnaflow Performance

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Magnaflow limited warranty

Part #: M6616865

MAGNAFLOW EXHAUST SYSTEM

Magnaflow's exhaust system is made of 100 percent tough and durable stainless steel. It is dyno tested and proven to increase horsepower and torque while its mandrel-bent tubing provides better exhaust flow for optimum performance. Delivers a smooth and deep exhaust tone. Nothing performs better, looks better, or sounds better than Magnaflow performance exhaust.

Specifications

• Cat-back exhaust system
• Split rear exit
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Dual inlet and outlet muffler configuration
• One muffler
• Dual 3.5 in. polished stainless steel tips with round shape, angle cut, and rolled edge design

Features

• Mandrel-bent tubing

Notes

• 50-state legal
• Weld-on attachment style

Finish: Natural

Material: Stainless steel

Series: Magnaflow Performance

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Magnaflow limited warranty

Part #: M6616487

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Split side exit
• 2.25 in. main piping diameter
• 2.25 in. tail pipe diameter
• Dual inlet and outlet muffler configuration
• One muffler
• Dual 4 in. polished stainless steel tips with round shape, angle cut, and rolled edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Natural

Material: Stainless steel

Series: Borla Performance

Type: Direct fit, 50-state legal

Exit: Split Side

Tip Shape: Round

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B25140238

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Single rear exit
• 2 in. main piping diameter
• 2.25 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Single 4 in. polished stainless steel tip with round shape, angle cut, and phantom edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Natural

Material: Stainless steel

Series: Borla Performance

Type: Direct fit, 50-state legal

Exit: Rear

Tip Shape: Round

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2514814

BORLA UNIVERSAL HOT ROD KIT

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Header-back exhaust system
• Dual rear exit
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Two mufflers
• Dual 3 in. polished stainless steel tips with round shape, straight cut, and phantom edge design

Features

• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Polished

Material: Stainless steel

Series: Borla Universal Hot Rod

Type: Universal product, 50-state legal

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2510512

MAGNAFLOW EXHAUST SYSTEM

Magnaflow's exhaust system is made of 100 percent tough and durable stainless steel. It is dyno tested and proven to increase horsepower and torque while its mandrel-bent tubing provides better exhaust flow for optimum performance. Delivers a smooth and deep exhaust tone. Nothing performs better, looks better, or sounds better than Magnaflow performance exhaust.

Specifications

• Cat-back exhaust system
• Single rear exit
• 2.25 in. main piping diameter
• 2.25 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Single 4 in. polished stainless steel tip with round shape, angle cut, and rolled edge design

Features

• 10% increase in horsepower
• Mandrel-bent tubing

Notes

• 50-state legal
• Weld-on attachment style

Finish: Natural

Material: Stainless steel

Series: Magnaflow Performance

Type: Direct fit, 50-state legal

Exit: Rear

Quantity Sold: Assembly

Warranty: Lifetime Magnaflow limited warranty

Part #: M6615759

BOSAL MUFFLER

Bosal muffler is made to fit vehicle-specific requirements for backpressure, emissions, sound levels, and sensors. Its precision-manufactured to high tolerances for long life.

Specifications

• 92 in. L x 15 in. W x 8 in. H, 92 in. overall length
• Single offset inlet
• Single offset outlet
• Round body
• Aluminized steel muffler material

Features

• OE-style sound

Finish: Natural

Location: Rear

Material: Aluminized steel

Type: Direct OE replacement

Quantity Sold: Sold individually

Warranty: 2-year Bosal limited warranty

Part #: BO295187

BORLA CAT-BACK EXHAUST SYSTEM, STAINLESS STEEL, NATURAL FINISH -- 50-state legal; Increases power by 7 to 15 percent; 2.25 in. main piping diameter, 2.25 in. tailpipe diameter; Single inlet and outlet muffler configuration; Single side exit; Includes pipes, muffler, clamps, flange, and single 4 in. outlet, 14 in. length polished stainless steel tip with round shape, angle-cut, and rolled edge design; Made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent stainless steel that maintains low decibels and protects the vehicle against burnout; Dyno-proven to yield an increase in flow and power while providing better fuel economy; Insulated to reduce shell temperature for a cooler driver's compartment; Features a patented uninterrupted-flow design and multi-core technology; With longer spike for scavenging to generate maximum power; Easy clamp-on installation.

Finish: Natural

Material: Stainless steel

Type: Direct fit, 50-state legal

Tip Shape: Round

Tip Style: Rolled Angle Cut

Quantity Sold: Assembly

Part #: B25140140

BOSAL MUFFLER

Bosal muffler is made to fit vehicle-specific requirements for backpressure, emissions, sound levels, and sensors. Its precision-manufactured to high tolerances for long life.

Specifications

• 101 in. L x 28 in. W
• Single offset inlet
• Single offset outlet
• Round body
• Aluminized steel muffler material

Features

• OE-style sound

Finish: Natural

Location: Rear

Material: Aluminized steel

Type: Direct OE Replacement, Standard OE Replacement

Quantity Sold: Sold individually

Warranty: 2-year Bosal limited warranty

Part #: BO294725

DYNOMAX DUAL EXHAUST SYSTEM

Dynomax's exhaust system is designed to deliver maximum horsepower, torque and superior exhaust flow. Its mandrel-bent tubing provides smooth and unrestricted flow that helps the entire system perform efficiently.

Specifications

• Cat-back exhaust system
• Split side exit
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Dual inlet and outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Dual 3 in. polished stainless steel tips with round shape, angle cut, and non-rolled edge design

Features

• 11 h.p. and 15 lb.-ft. of torque
• Mandrel-bent tubing

Notes

• 50-state legal
• Clamp-on attachment style

Finish: Natural

Material: Stainless steel

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Part #: D2239471