Cadillac Brembo Brake Rotors Information

Brembo Cross Drilled Sport Brake Set

The Brembo Cross Drilled Rotors provide the race-bred engineering of cross drilling to provide multiple paths to disperse built-up heat and gasses created under sever braking conditions.

The Brembo Sport discs are premium OEM replacement units that meet or exceed all vehicle manufacturers specifications and tolerances. They are fully compatible with stock calipers wheels and other chassis components, easily mounting onto the vehicle.

The Cross-Drilled Style Rotors will operate at a slightly cooler temperature than the slotted style because of the added air surface created by the drill pattern. The rotor design was engineered by Brembo to improve pad bite, improve wet weather performance, continuously refreshes the brake pad and prevents gas from building up between the brake pad and rotor.

• Cross Drilled design prevents the formation of a film of water on the disc surface in case of rain.
• 100% compatible with the standard components.
• The disc hole shape is designed for top performance and minimum additional wear to the brake pads.
• The protective galvanizing treatment improves the disc's appearance and prevents corrosion.
• The discs used are produced with high carbon cast iron.

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Location: Rear

Quantity Sold: Sold individually

Part #: W0133-1686770

Brembo Cross Drilled Sport Brake Set

The Brembo Cross Drilled Rotors provide the race-bred engineering of cross drilling to provide multiple paths to disperse built-up heat and gasses created under sever braking conditions.

The Brembo Sport discs are premium OEM replacement units that meet or exceed all vehicle manufacturers specifications and tolerances. They are fully compatible with stock calipers wheels and other chassis components, easily mounting onto the vehicle.

The Cross-Drilled Style Rotors will operate at a slightly cooler temperature than the slotted style because of the added air surface created by the drill pattern. The rotor design was engineered by Brembo to improve pad bite, improve wet weather performance, continuously refreshes the brake pad and prevents gas from building up between the brake pad and rotor.

• Cross Drilled design prevents the formation of a film of water on the disc surface in case of rain.
• 100% compatible with the standard components.
• The disc hole shape is designed for top performance and minimum additional wear to the brake pads.
• The protective galvanizing treatment improves the disc's appearance and prevents corrosion.
• The discs used are produced with high carbon cast iron.

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Location: Front

Quantity Sold: Sold individually

Warranty: 12-month or 12,000-mile Brembo limited warranty

Part #: W0133-1598848

Brembo Cross Drilled Sport Brake Set

The Brembo Cross Drilled Rotors provide the race-bred engineering of cross drilling to provide multiple paths to disperse built-up heat and gasses created under sever braking conditions.

The Brembo Sport discs are premium OEM replacement units that meet or exceed all vehicle manufacturers specifications and tolerances. They are fully compatible with stock calipers wheels and other chassis components, easily mounting onto the vehicle.

The Cross-Drilled Style Rotors will operate at a slightly cooler temperature than the slotted style because of the added air surface created by the drill pattern. The rotor design was engineered by Brembo to improve pad bite, improve wet weather performance, continuously refreshes the brake pad and prevents gas from building up between the brake pad and rotor.

• Cross Drilled design prevents the formation of a film of water on the disc surface in case of rain.
• 100% compatible with the standard components.
• The disc hole shape is designed for top performance and minimum additional wear to the brake pads.
• The protective galvanizing treatment improves the disc's appearance and prevents corrosion.
• The discs used are produced with high carbon cast iron.

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Location: Front

Quantity Sold: Sold individually

Warranty: 12-month or 12,000-mile Brembo limited warranty

Part #: W0133-1599512

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Location: Front

Quantity Sold: Sold individually

Warranty: 12-month or 12,000-mile Brembo limited warranty

Part #: W0133-1615316

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Location: Rear

Quantity Sold: Sold individually

Warranty: 12-month or 12,000-mile Brembo limited warranty

Part #: W0133-1694632

Brembo Cross Drilled Sport Brake Set

The Brembo Cross Drilled Rotors provide the race-bred engineering of cross drilling to provide multiple paths to disperse built-up heat and gasses created under sever braking conditions.

The Brembo Sport discs are premium OEM replacement units that meet or exceed all vehicle manufacturers specifications and tolerances. They are fully compatible with stock calipers wheels and other chassis components, easily mounting onto the vehicle.

The Cross-Drilled Style Rotors will operate at a slightly cooler temperature than the slotted style because of the added air surface created by the drill pattern. The rotor design was engineered by Brembo to improve pad bite, improve wet weather performance, continuously refreshes the brake pad and prevents gas from building up between the brake pad and rotor.

• Cross Drilled design prevents the formation of a film of water on the disc surface in case of rain.
• 100% compatible with the standard components.
• The disc hole shape is designed for top performance and minimum additional wear to the brake pads.
• The protective galvanizing treatment improves the disc's appearance and prevents corrosion.
• The discs used are produced with high carbon cast iron.

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Location: Front

Quantity Sold: Sold individually

Warranty: 12-month or 12,000-mile Brembo limited warranty

Part #: W0133-1599045

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Location: Front

Quantity Sold: Sold individually

Warranty: 12-month or 12,000-mile Brembo limited warranty

Part #: W0133-1617383

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

Location: Front

Quantity Sold: Sold individually

Warranty: 12-month or 12,000-mile Brembo limited warranty

Part #: W0133-1684420

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

NLA - 3/10

Location: Rear

Quantity Sold: Sold individually

Warranty: 12-month or 12,000-mile Brembo limited warranty

Part #: W0133-1685723

Brembo Brake Disc

Brembo manufactures an OE-Quality Brake Disc that assures maximum performance and enhanced driving comfort and offers with its aftermarket rotors the same levels of quality, technology and performance that are found in many of the prestigious OEM fitments.

Easy Check: Easy Check discs feature two holes on the braking surface of the rotor, which indicate two different levels of wear and allow the state of wear of the disc to be checked at a glance. When both of these holes are no longer visible, the disc has reached its minimum permissible thickness and must be replaced.

High Carbon: With their optimized thermal inertia, Brembo High Carbon discs reduce both vibration and noise. These products are the result of Brembo technology and a meticulously controlled production process in the brand's foundries, which makes it possible to precisely vary the chemical composition of the cast iron, increasing the percentage of carbon in High Carbon discs.

PVT pillar venting technology: (Vented Rotors Only) Brembo PVT discs feature the exclusive pillar venting system patented by Brembo, which improves cooling capacity and increases resistance to thermal cracking by over 40%.

• OE-Equivalent and a direct fit replacement
• Made of special cast iron with high carbon content
• Pillar Venting Technology (Vented Rotors Only)
• Easy Check wear indicator system
• Provides a higher friction coefficient.
• Resistant to vibrations and noise.

TÜV: The entire Brembo brake disc range, for both passenger cars and commercial vehicles, is certified by TÜV (Technischer Überwachungs-Verein, the prestigious German technical testing association) t be compliant with ABE homologation standards defined by the Federal German Road Transport Authority.

Warranty Information: BREMBO S.p.A. warrants to the original user that this product complies with Manufacturer’s published specifications and is free from manufacturing defects in materials and workmanship (a “Covered Defect”). This warranty is limited in duration to two (2) years from the date of purchase or such longer period required by law.

---

Warranty Information: 12 month - 12,000 mile limited warranty.

---

NLA - 3/10

Location: Front

Quantity Sold: Sold individually

Warranty: 12-month or 12,000-mile Brembo limited warranty

Part #: W0133-1685482