Ford Dayco V Drive Belts Information

DAYCO TIMING BELT KIT -- Includes timing belt, 1 belt tensioner, 1 idler pulley, and 1 tensioner spring; Complete with detailed instructions; Guaranteed to fit and meet the specifications of the OE parts being replaced; Contents are individually packaged in plastic bags so that the parts can be identified and compared to the original without compromising the integrity of the kit; With Dayco limited warranty.

Quantity Sold: Kit

Warranty: 12-month or 12,000-mile Dayco warranty

Part #: DY95318K1

DAYCO TIMING BELT KIT -- Includes timing belt, 1 belt tensioner, 1 idler pulley, and 1 tensioner spring; Complete with detailed instructions; Guaranteed to fit and meet the specifications of the OE parts being replaced; Contents are individually packaged in plastic bags so that the parts can be identified and compared to the original without compromising the integrity of the kit; With Dayco limited warranty.

Quantity Sold: Kit

Warranty: Dayco limited warranty

Part #: DY95228K1

DAYCO NO SLACK AUTOMATIC BELT TENSIONER -- Designed to maintain constant tension on serpentine belt drives; Features a patented flat spring design that provides less operating range variations in tension, reduces the risk of premature accessory bearing failure, and lessens the risk of belt squeal and slippage or poor accessory performance; Designed with a Teflon strip wound within the spring to resist abrasion; A heavy-duty cast aluminum arm offers additional strength and less distortion, an aluminum retainer ring locks the spring case and arm together and seals against corrosion, a thermoplastic rubber spring slot plug keeps out harmful contaminants, and a rubber O-ring seals against dust and grime; The lubricated nylon pivot tube bushing and spring bushing promote quieter performance, while the zinc coated mounting bolt resists rust and is concentric for a more even degree of constant tension.

Quantity Sold: Sold individually

Warranty: Dayco limited warranty

Part #: DY89251

DAYCO SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 91.54 in. effective length, W rib profile, standard rib type, rubber backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Quantity Sold: Sold individually

Warranty: Dayco limited warranty

Part #: DY5060915

DAYCO TIMING BELT KIT -- Includes timing belt, water pump, and 1 belt tensioner; Complete with detailed instructions; Guaranteed to fit and meet the specifications of the OE parts being replaced; Contents are individually packaged in plastic bags so that the parts can be identified and compared to the original without compromising the integrity of the kit; With Dayco limited warranty.

Quantity Sold: Kit

Warranty: 12-month or 12,000-mile Dayco warranty

Part #: DYWP184K1B

DAYCO NO SLACK IDLER PULLEY -- 90 mm OD, 17 mm ID, 30 mm W, flat steel without flange; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance.

Location: Driver Side

Quantity Sold: Sold individually

Warranty: Dayco limited warranty

Part #: DY89006

DAYCO NO SLACK IDLER PULLEY -- 90 mm OD, 17 mm ID, 30 mm W, flat steel without flange; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance.

Quantity Sold: Sold individually

Warranty: Dayco limited warranty

Part #: DY89006

DAYCO SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 87.01 in. effective length, W rib profile, standard rib type, rubber backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Quantity Sold: Sold individually

Warranty: Dayco limited warranty

Part #: DY5060870

DAYCO SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 82.5 in. effective length, W rib profile, standard rib type, rubber backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Quantity Sold: Sold individually

Warranty: Dayco limited warranty

Part #: DY5060825

DAYCO BELT TENSIONER -- Automatic Belt Tensioner, The Featured Patented Flat Spring Design Reduces The Risk Of Accessory Bearing Failure, Reduces The Risk Of Belt Squeal And Slippage, Or Poor Accessory Performance Caused By Low Tension, The Flat Spring Is Coated To Resist Rust, Heavy Duty Cast Aluminum Spring Case Resists Cracking, Heavy-Duty Cast Aluminum Arm Offers Additional Strength And Less Distortion

Quantity Sold: Sold individually

Part #: DY89308