Mazda Denso Cold Air Intake Information

DENSO REGULAR CLASS OXYGEN SENSOR

Denso Regular Class Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 4-wire
• 11.77 in. lead wire
• Non-flanged

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

1 required per vehicle. Requires wire splicing and electrical installation. Reuse your old connector.

Location: After Primary Catalytic Converter

Type: OE replacement, 4-wire

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2344209

DENSO REGULAR CLASS OXYGEN SENSOR

Denso Regular Class Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 4-wire
• 11.77 in. lead wire
• Non-flanged

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

1 required per vehicle. Requires wire splicing and electrical installation. Reuse your old connector.

Location: After Secondary Catalytic Converter

Type: OE replacement, 4-wire

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2344209

DENSO REGULAR CLASS OXYGEN SENSOR

Denso Regular Class Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 4-wire
• 11.77 in. lead wire
• Non-flanged

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

1 required per vehicle. Requires wire splicing and electrical installation. Reuse your old connector.

Location: After Catalytic Converter

Type: OE replacement, 4-wire

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2344209

DENSO REGULAR CLASS OXYGEN SENSOR

Denso Regular Class Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 4-wire
• 11.77 in. lead wire
• Non-flanged

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

1 required per vehicle. Requires wire splicing and electrical installation. Reuse your old connector.

Location: Before Catalytic Converter

Type: OE replacement, 4-wire

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2344209

DENSO REGULAR CLASS OXYGEN SENSOR

Denso Regular Class Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 4-wire
• 11.77 in. lead wire
• Non-flanged

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

1 required per vehicle. Requires wire splicing and electrical installation. Reuse your old connector.

Location: Before Primary Catalytic Converter

Type: OE replacement, 4-wire

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2344209

DENSO REGULAR CLASS TRADITIONAL SPARK PLUG

Denso's Regular Class Traditional Spark Plugs guarantee the quality of the product they produce because every component that leaves their factories has been designed with precision, manufactured to the strictest OE standards and subjected to rigorous safety and performance tests.

Specification:

• 14 mm thread size
• 18 mm reach
• 0.63 in. hex size
• 0.06 in. gap size
• Tapered seat style
• Resistor plug type
• U-groove ground electrodes
• Removable terminal
• Projected tip
• Heat range 16

Features:

• Designed with heavy duty insulator that provides unparalleled dielectric strength and thermal conductivity under extreme temperatures
• Copper glass seal bonds the center electrode and insulator together for a gas-tight seal
• Platinum center electrode utilizes platinum to shrink the surface area of the center electrode tip for maximum firing performance and minimum voltage requirements
• Platinum ground electrode resists gas and electrical erosion and corrosion extending service intervals to 60,000 miles

Series: Denso Standard

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP5023

K&N 77 SERIES HIGH FLOW PERFORMANCE AIR INTAKE KIT

K&N's 77 Series high-flow performance air intake kit is designed to replace your vehicle's restrictive factory air filter and air intake housing. It dramatically reduces intake restriction resulting in additional power and torque. Custom engineered and aerodynamically designed to drive more air into your engine. Its air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Mounting hardware included
• Polished tube finish
• T-6063 aluminum tube material

Features

• Provides power up to 11.24 h.p. at 4950 rpm
• Up to 99% filtration efficiency
• Mandrel-bent tubing
• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Product legal for sale in California under Executive Order (EO) number D-269-34. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: K&N 77

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33772561KP

VOLANT COLD AIR INTAKE KIT

Volant's cold air intake kit is engineered to increase horsepower and engine response. Ensures a less restrictive air passage through its large diameter air duct sculptured with smooth bends. Its awesome performance look lid contributes to the system's sleek style and its silicon connectors provide flexibility while maintaining strength and thermal stability.

Specifications

• Synthetic filter material
• Oiled filter element
• With heat shield
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Assembly

Part #: V3119740

AFE MAGNUM FORCE STAGE 1 XP COLD AIR INTAKE SYSTEM -- 50-state legal; XL canister; Provides additional power up to 21 h.p. and 36 lb.-ft. at 5300 RPM torque; Increases airflow up to 50 percent; Includes Pro Guard 7 air filter that is made of patented seven layers of media that consists of five layers of cotton gauze and two layers of random porosity, 3-angle velocity stack adapter, adjustable ram-scoop, durable cover that allows great seal against all conditions, and dzus fasteners for easy filter access; Universal off-road canister; Replaces OE air filter with a revolutionary Pro-Dry S filter that provides maximum protection against extreme dirt and dust conditions; Delivers aggressive performance sound; Trim sealed or covered to seal out hot engine air; Features washable and reusable filter that comes with the industry's deepest pleats for greater flow and dust holding capacity; Pre-positioned opening for stock attachments to avoid dangling wires and relocating of hoses or tubes; For use in off-road applications.

Series: AFE Magnum force stage 1 XP

Type: Minor modifications required, 50-state legal

Quantity Sold: Assembly

Warranty: 2-year AFE limited warranty

Part #: A157511061

INJEN RACE DIVISION COLD AIR INTAKE

Injen's Race Division cold air intake is a race tuned air intake system designed for enthusiasts wanting mid-range power. Its intake tube is strategically placed behind the front bumper to accumulate colder and denser air resulting to massive performance gains while maintaining the factory air and fuel mixture safe.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Polished tube finish
• 6061 T-6 aluminum tube material

Notes

• Product legal for sale in California under Executive Order (EO) number D-476-4. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
• Fine-tuned for specific applications

Series: Injen IS

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Injen limited warranty

Part #: I24RD6061P