Nissan Denso Cold Air Intake Information

K&N 69 SERIES TYPHOON COLD AIR INTAKE SYSTEM

K&N's 69 Series Typhoon cold air intake kit is designed to replace your vehicle's restrictive factory air filter and air intake housing. It dramatically reduces intake restriction resulting in additional power and torque. Custom engineered and aerodynamically designed to drive more air into your engine. Its air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Silver tube finish
• T-6063 aluminum tube material

Features

• Mandrel-bent tubing
• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Series: K&N 69 Typhoon

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Assembly

Part #: K33697071TS

INJEN RACE DIVISION COLD AIR INTAKE

Injen's Race Division cold air intake is a race tuned air intake system designed for enthusiasts wanting mid-range power. Its intake tube is strategically placed behind the front bumper to accumulate colder and denser air resulting to massive performance gains while maintaining the factory air and fuel mixture safe.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Mounting hardware included
• Polished tube finish
• 6061 T-6 aluminum tube material

Notes

• Product legal for sale in California under Executive Order (EO) number D-476-4. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
• Fine-tuned for specific applications

Series: Injen Race division

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Injen limited warranty

Part #: I24RD1940P

AFE MAGNUM FORCE STAGE 1 XP COLD AIR INTAKE SYSTEM -- 50-state legal; XL canister; Provides additional power up to 21 h.p. and 36 lb.-ft. at 5300 RPM torque; Increases airflow up to 50 percent; Includes Pro Guard 7 air filter that is made of patented seven layers of media that consists of five layers of cotton gauze and two layers of random porosity, 3-angle velocity stack adapter, adjustable ram-scoop, durable cover that allows great seal against all conditions, and dzus fasteners for easy filter access; Universal off-road canister; Replaces OE air filter with a revolutionary Pro-Dry S filter that provides maximum protection against extreme dirt and dust conditions; Delivers aggressive performance sound; Trim sealed or covered to seal out hot engine air; Features washable and reusable filter that comes with the industry's deepest pleats for greater flow and dust holding capacity; Pre-positioned opening for stock attachments to avoid dangling wires and relocating of hoses or tubes; For use in off-road applications.

Series: AFE Magnum force stage 1 XP

Type: Minor modifications required, 50-state legal

Quantity Sold: Assembly

Warranty: 2-year AFE limited warranty

Part #: A157511061

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AL

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AS

AEM COLD AIR INDUCTION SYSTEM

AEM's Cold Air Induction System is engineered to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.

Specifications

• Synthetic filter material
• Dry filter element
• Without heat shield
• Polished tube finish
• T-6063 aluminum tube material

Features

• Up to 99.52% filtration efficiency
• Mandrel-bent tubing
• Washable and reusable air filter
• Manufactured and assembled in the U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-670. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime AEM limited warranty

Part #: A1821549P

49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Cast Finish, Use OE Gasket Part number GM10159409 For Manifold Gasket

Material: Aluminum

Type: Direct OE replacement

Quantity Sold: Sold individually

Part #: E113706

TAKEDA RETAIN SHORT RAM INTAKE -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; Provides additional power gains of up to 6 h.p. and 7 lb. - ft. of torque; Up to 99.4 percent filtration efficiency; Up to 416 CFM; Includes polished aluminum intake tube, gray air filter, and wrinkle black heat shield; Its intake tube features an anodized maintenance-free coat for added durability, while its air filter uses a revolutionary 2-layer synthetic dry media that does not require oil to filter out dirt; Provides more air flow for increased horsepower, torque, and fuel economy; Developed in a state of the art factory by experienced airflow engineers, utilizing digital measuring, rapid prototyping and real world dyno testing for optimal performance and original factory fit and function; Flow bench tested and computer modeled for maximum efficiency; Cleans easily and quickly either by tapping, vacuuming, or washing; CNC machined sensors require proper height and fitment to ensure that the vehicle does not get a check engine light; Some applications utilize a three angled adaptor that speeds up the air flow; Compatible with replacement filter part number TF-9005D; With Takeda's 2-year limited warranty.

Series: Takeda Retain

Quantity Sold: Assembly

Warranty: 2-year Takeda limited warranty

Part #: TAKTR3005P

DENSO SUPER CLASS FIRST TIME FIT OXYGEN SENSOR

Denso Super Class First Time Fit Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 3-wire
• 14.93 in. lead wire

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

This part does not require wire cutting.

Location: Driver Side, Before Catalytic Converter

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2343109

DENSO SUPER CLASS FIRST TIME FIT OXYGEN SENSOR

Denso Super Class First Time Fit Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 3-wire
• 14.93 in. lead wire

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

This part does not require wire cutting.

Location: Before Catalytic Converter

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2343109