Saab Denso Cold Air Intake Information

DENSO REGULAR CLASS OXYGEN SENSOR

Denso Regular Class Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 4-wire
• 11.77 in. lead wire
• Non-flanged

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

1 required per vehicle. Requires wire splicing and electrical installation. Reuse your old connector.

Location: After Catalytic Converter

Type: OE replacement, 4-wire

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2344209

AFE MAGNUM FORCE STAGE 1 XP COLD AIR INTAKE SYSTEM -- 50-state legal; XL canister; Provides additional power up to 21 h.p. and 36 lb.-ft. at 5300 RPM torque; Increases airflow up to 50 percent; Includes Pro Guard 7 air filter that is made of patented seven layers of media that consists of five layers of cotton gauze and two layers of random porosity, 3-angle velocity stack adapter, adjustable ram-scoop, durable cover that allows great seal against all conditions, and dzus fasteners for easy filter access; Universal off-road canister; Replaces OE air filter with a revolutionary Pro-Dry S filter that provides maximum protection against extreme dirt and dust conditions; Delivers aggressive performance sound; Trim sealed or covered to seal out hot engine air; Features washable and reusable filter that comes with the industry's deepest pleats for greater flow and dust holding capacity; Pre-positioned opening for stock attachments to avoid dangling wires and relocating of hoses or tubes; For use in off-road applications.

Series: AFE Magnum force stage 1 XP

Type: Minor modifications required, 50-state legal

Quantity Sold: Assembly

Warranty: 2-year AFE limited warranty

Part #: A157511061

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AL

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AS

49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Cast Finish, Use OE Gasket Part number GM10159409 For Manifold Gasket

Material: Aluminum

Type: Direct OE replacement

Quantity Sold: Sold individually

Part #: E113706

DENSO PREMIUM CLASS IRIDIUM SPARK PLUG

Denso's Premium Class Iridium Spark Plugs is fast becoming the standard for today's high-tech engines. Employing a revolutionary 360 degrees laser welding process, Denso has created a spark plug unlike anything on the market today. Designed for durability under the most extreme conditions. Denso's patented Iridium alloy is 6 times harder and 8 times stronger than conventional platinum and can handle temperatures in excess of 4,000 degrees Fahrenheit.

Specification:

• 14 mm thread size
• 18 mm reach
• 0.63 in. hex size
• 0.04 in. gap size
• Tapered seat style
• Resistor plug type
• 0.4 mm iridium center electrode
• Tapered cut U-groove ground electrode
• Removable terminal
• Heat range 16

Features:

• Designed with heavy duty insulator that provides unparalleled dielectric strength and thermal conductivity under extreme temperatures
• Five-rib design prevents flashover while decreasing voltage loss
• Copper glass seal bonds the center electrode and insulator together for a gas-tight seal
• Platinum center electrode utilizes platinum to shrink the surface area of the center electrode tip for maximum firing performance and minimum voltage requirements
• Platinum ground electrode resists gas and electrical erosion and corrosion extending service intervals to 60,000 miles

Series: Denso Iridium Power

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NPIT16

DENSO SUPER CLASS FIRST TIME FIT OXYGEN SENSOR

Denso Super Class First Time Fit Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 4-wire
• 14.76 in. lead wire

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

This part does not require wire cutting.

Location: After Catalytic Converter

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2344669

BOSCH COLD START VALVE -- A high quality, direct fit OE replacement cold start valve.

Quantity Sold: Sold individually

Warranty: 12-month or 12,000-mile Bosch limited warranty

Part #: BS0280170010

WEIAND STEALTH SERIES INTAKE MANIFOLD, SATIN FINISH -- Single 4 Barrel Manifold, Non-EGR, Power Band 1500-6700 RPM, Square Bore, High Rise And Dual Plane, Combines The Low-End Throttle Response Of A 180 Degree Design With The Top-End Power Of A Single Plane Manifold, Satin Finish

Material: Aluminum

Type: Direct OE replacement

Quantity Sold: Sold individually

Part #: W208150

DENSO SUPER CLASS FIRST TIME FIT OXYGEN SENSOR

Denso Super Class First Time Fit Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 19.68 in. wire length

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

This part does not require wire cutting.

Location: Before Catalytic Converter

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2349123