Jaguar Denso Distributor Rotor Information

DENSO REGULAR CLASS OXYGEN SENSOR

Denso Regular Class Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 4-wire
• 11.77 in. lead wire
• Non-flanged

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

1 required per vehicle. Requires wire splicing and electrical installation. Reuse your old connector.

Location: Before Catalytic Converter

Type: OE replacement, 4-wire

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2344209

DENSO REGULAR CLASS TRADITIONAL SPARK PLUG

Denso's Regular Class Traditional Spark Plugs guarantee the quality of the product they produce because every component that leaves their factories has been designed with precision, manufactured to the strictest OE standards and subjected to rigorous safety and performance tests.

Specification:

• 14 mm thread size
• 18 mm reach
• 0.63 in. hex size
• 0.06 in. gap size
• Tapered seat style
• Resistor plug type
• U-groove ground electrodes
• Removable terminal
• Projected tip
• Heat range 16

Features:

• Designed with heavy duty insulator that provides unparalleled dielectric strength and thermal conductivity under extreme temperatures
• Copper glass seal bonds the center electrode and insulator together for a gas-tight seal
• Platinum center electrode utilizes platinum to shrink the surface area of the center electrode tip for maximum firing performance and minimum voltage requirements
• Platinum ground electrode resists gas and electrical erosion and corrosion extending service intervals to 60,000 miles

Series: Denso Standard

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP5023

EBC 3GD SPORT BRAKE ROTORS, DIMPLED AND SLOTTED, VENTED, SET OF 2

Keep your brake system cool with EBC 3GD Sport Series Brake Discs. These discs have wide aperture slots that draw cool air into the braking contact area, thereby reducing excess heat and preventing brake fade. During wet conditions, the slots help wick water away from the rotors while removing dirt, dust, debris, and gases created by heavy braking. Moreover, the slots maintain flat and parallel pad wear, keeping optimum pad contact throughout the life of the discs and pads. And, unlike other slotted discs that produce a lot of air noise, 3GD Sport Series Brake Discs only have three slots, making them more pleasant to the ear.

Specifications:

• 5 x 112 mm bolt pattern
• 11.18 in. disc diameter

Features:

• Made from precision machined, high quality gray iron that went through extensive testing and rigorous quality control
• Dimple drilled to avoid stress cracks
• Slotted to avoid the record grooves or galling common with non-slotted rotors
• New gold anodized EBC finish provides great looks whilst preventing corrosion

These discs are ideal for use with EBC upgrade sport pads. Install them yourself with EBC Instructional Video P/N E35DVD083 (sold separately).

Location: Front

Series: EBC 3GD Sport

Quantity Sold: Set of 2

Warranty: 6-month or 10,000-mile EBC warranty excluding wear and tear or race use

Part #: E35GD240

EBC 3GD SPORT BRAKE ROTORS, DIMPLED AND SLOTTED, SOLID, SET OF 2

Keep your brake system cool with EBC 3GD Sport Series Brake Discs. These discs have wide aperture slots that draw cool air into the braking contact area, thereby reducing excess heat and preventing brake fade. During wet conditions, the slots help wick water away from the rotors while removing dirt, dust, debris, and gases created by heavy braking. Moreover, the slots maintain flat and parallel pad wear, keeping optimum pad contact throughout the life of the discs and pads. And, unlike other slotted discs that produce a lot of air noise, 3GD Sport Series Brake Discs only have three slots, making them more pleasant to the ear.

Specifications:

• 5 lugs
• 11.02 in. disc diameter

Features:

• Made from precision machined, high quality gray iron that went through extensive testing and rigorous quality control
• Dimple drilled to avoid stress cracks
• Slotted to avoid the record grooves or galling common with non-slotted rotors
• New gold anodized EBC finish provides great looks whilst preventing corrosion

These discs are ideal for use with EBC upgrade sport pads. Install them yourself with EBC Instructional Video P/N E35DVD083 (sold separately).

Location: Front

Series: EBC 3GD Sport

Quantity Sold: Set of 2

Warranty: 6-month or 10,000-mile EBC warranty excluding wear and tear or race use

Part #: E35GD271

EBC ULTIMAX SLOTTED ROTOR (USR) BLACKDASH SERIES BRAKE DISCS, SLOTTED, VENTED, BLACK ZINC, SET OF 2

Enjoy improved sport braking with EBC USR Blackdash Brake Discs. Just like regular slotted discs, these degas pads for cooler braking operation and help remove dirt, brake dust, and water from the brake area. They also promote flat and parallel pad wear for consistent braking performance during the life of the discs and the pads. But what sets Blackdash discs above all other slotted discs is its multi-slot pattern. Unlike regular slots that produce air noise, Blackdash disc slots are narrower in size and are set at a progressive angle, making braking operation incredibly quiet and effective at the same time.

Specifications:

• 5 lugs
• 12.01 in. disc diameter

Features:

• Manufactured to OE specifications using high tensile strength G3000 gray cast iron
• Coated with black zinc finish
• Maintains a flat and parallel pad wear and avoids the record grooves or galling common with non-slotted rotors

Professional installation is recommended, but you can install this brake disc yourself with EBC Instructional Video P/N E35DVD083 (sold separately). Never use old brake pads with new discs. For optimal braking performance, match Blackdash discs with EBC Redstuff, Greenstuff, or Yellowstuff brake pads.

Location: Rear

Series: EBC Ultimax Blackdash

Quantity Sold: Set of 2

Warranty: 6-month or 10,000-mile EBC warranty excluding wear and tear or race use

Part #: E35USR953

EBC 3GD SPORT BRAKE ROTORS, DIMPLED AND SLOTTED, SOLID, SET OF 2

Keep your brake system cool with EBC 3GD Sport Series Brake Discs. These discs have wide aperture slots that draw cool air into the braking contact area, thereby reducing excess heat and preventing brake fade. During wet conditions, the slots help wick water away from the rotors while removing dirt, dust, debris, and gases created by heavy braking. Moreover, the slots maintain flat and parallel pad wear, keeping optimum pad contact throughout the life of the discs and pads. And, unlike other slotted discs that produce a lot of air noise, 3GD Sport Series Brake Discs only have three slots, making them more pleasant to the ear.

Specifications:

• 4 x 3.75 in. bolt pattern
• 10.39 in. disc diameter

Features:

• Made from precision machined, high quality gray iron that went through extensive testing and rigorous quality control
• Dimple drilled to avoid stress cracks
• Slotted to avoid the record grooves or galling common with non-slotted rotors
• New gold anodized EBC finish provides great looks whilst preventing corrosion

These discs are ideal for use with EBC upgrade sport pads. Install them yourself with EBC Instructional Video P/N E35DVD083 (sold separately).

Location: Rear

Series: EBC 3GD Sport

Quantity Sold: Set of 2

Warranty: 6-month or 10,000-mile EBC warranty excluding wear and tear or race use

Part #: E35GD239

DENSO PREMIUM CLASS IRIDIUM SPARK PLUG

Denso's Premium Class Iridium Spark Plugs is fast becoming the standard for today's high-tech engines. Employing a revolutionary 360 degrees laser welding process, Denso has created a spark plug unlike anything on the market today. Designed for durability under the most extreme conditions. Denso's patented Iridium alloy is 6 times harder and 8 times stronger than conventional platinum and can handle temperatures in excess of 4,000 degrees Fahrenheit.

Specification:

• 14 mm thread size
• 18 mm reach
• 0.63 in. hex size
• 0.04 in. gap size
• Tapered seat style
• Resistor plug type
• 0.4 mm iridium center electrode
• Tapered cut U-groove ground electrode
• Removable terminal
• Heat range 16

Features:

• Designed with heavy duty insulator that provides unparalleled dielectric strength and thermal conductivity under extreme temperatures
• Five-rib design prevents flashover while decreasing voltage loss
• Copper glass seal bonds the center electrode and insulator together for a gas-tight seal
• Platinum center electrode utilizes platinum to shrink the surface area of the center electrode tip for maximum firing performance and minimum voltage requirements
• Platinum ground electrode resists gas and electrical erosion and corrosion extending service intervals to 60,000 miles

Series: Denso Iridium Power

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NPIT16

DENSO SUPER CLASS ALTERNATOR, REMANUFACTURED -- Precision designed and performance tested OE-standard quality alternator; Features a housing re-tapped to OEM specifications and damaged-checked for heat warping, corrosion or improper surface alignment; Has performance and insulation tested rotor and stator to 600 volts, re-packed bearing with OEM grade lubricant, up to 300 volts performance tested rectifier, and 100 percent stripped and replated hardware; Its slip ring is rematched to an average of 8 microns or 20 microns run-out maximum.

Condition: Remanufactured

Quantity Sold: Sold individually

Warranty: 12-month or unlimited-mile Denso limited warranty

Part #: NP2100421

DENSO REGULAR CLASS TRADITIONAL SPARK PLUG

Denso's Regular Class Traditional Spark Plugs guarantee the quality of the product they produce because every component that leaves their factories has been designed with precision, manufactured to the strictest OE standards and subjected to rigorous safety and performance tests.

Specification:

• 14 mm thread size
• 18 mm reach
• 0.63 in. hex size
• 0.06 in. gap size
• Tapered seat style
• Resistor plug type
• U-groove ground electrodes
• Removable terminal
• Projected tip
• Heat range 16

Features:

• Designed with heavy duty insulator that provides unparalleled dielectric strength and thermal conductivity under extreme temperatures
• Five-rib design prevents flashover while decreasing voltage loss
• Copper glass seal bonds the center electrode and insulator together for a gas-tight seal
• Platinum center electrode utilizes platinum to shrink the surface area of the center electrode tip for maximum firing performance and minimum voltage requirements
• Platinum ground electrode resists gas and electrical erosion and corrosion extending service intervals to 60,000 miles

Series: Denso Standard

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NPT16EPRU15

BREMBO BRAKE DISC, VENTED, SOLD INDIVIDUALLY

Restore the braking performance of your vehicle with Brembo Brake Discs. Built with quality that earned Brembo its OEM fitments, these discs are guaranteed to meet OE fit, form, and function.

Specifications:

• 5 lugs
• 305 mm disc diameter
• 20 mm thickness
• 18.5 mm minimum thickness
• 67.8 mm height
• QS-9000, ISO 9001, and TUV/ABE certified

Features:

• Made from casting that came from Brembo facilities to ensure uniform thickness
• Coated for corrosion resistance
• Machined to exacting tolerances
• Electronically balanced to minimize vibration

Location: Rear

Series: Brembo OE Replacement

Quantity Sold: Sold individually

Part #: BR25485