Ford Denso Engine Control Unit Information

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• DOHC
• Block cast number XW4W
• Head left cast number YL8E
• Head right cast number YF1E

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Condition: Remanufactured

Quantity Sold: Sold individually

Part #: MEIF18319C

MARSHALL ENGINES PREMIUM LONG BLOCK, REMANUFACTURED

Marshall Engines Remanufactured Premium Long Block Engines are built to the superior quality standards, assembled with precision and impeccable quality control, superior to rebuilt engines, and are shipped with the best warranty in the replacement engine industry. Completely remanufactured engine with all new wear parts, tight tolerances, and run-tested reliability.

Specifications:

• OHV
• Rear wheel drive
• Roller tappet

Features:

• 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked
• Supplied with adjusted valve train components, gasket set, and new oil pump
• Bake cleaned and shot blasted cylinder heads
• Checked bend and journal polished to achieves perfect seal
• Installed camshafts, valves and springs, and 3-angled cut on valve seats
• Micro-polished design exceeding the original finish ensuring proper bearing lubrication and a final wash to ensure that crank is clean

Condition: Remanufactured

Quantity Sold: Sold individually

Part #: MEIF18313C

DENSO REGULAR CLASS OXYGEN SENSOR

Denso Regular Class Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 4-wire
• 11.77 in. lead wire
• Non-flanged

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

1 required per vehicle. Requires wire splicing and electrical installation. Reuse your old connector.

Location: After Catalytic Converter

Type: OE replacement, 4-wire

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2344209

DENSO REGULAR CLASS OXYGEN SENSOR

Denso Regular Class Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 4-wire
• 11.77 in. lead wire
• Non-flanged

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

1 required per vehicle. Requires wire splicing and electrical installation. Reuse your old connector.

Location: Before Catalytic Converter

Type: OE replacement, 4-wire

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2344209

DENSO REGULAR CLASS TRADITIONAL SPARK PLUG

Denso's Regular Class Traditional Spark Plugs guarantee the quality of the product they produce because every component that leaves their factories has been designed with precision, manufactured to the strictest OE standards and subjected to rigorous safety and performance tests.

Specification:

• 14 mm thread size
• 18 mm reach
• 0.63 in. hex size
• 0.06 in. gap size
• Tapered seat style
• Resistor plug type
• U-groove ground electrodes
• Removable terminal
• Projected tip
• Heat range 16

Features:

• Designed with heavy duty insulator that provides unparalleled dielectric strength and thermal conductivity under extreme temperatures
• Copper glass seal bonds the center electrode and insulator together for a gas-tight seal
• Platinum center electrode utilizes platinum to shrink the surface area of the center electrode tip for maximum firing performance and minimum voltage requirements
• Platinum ground electrode resists gas and electrical erosion and corrosion extending service intervals to 60,000 miles

Series: Denso Standard

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP5023

CYLINDER HEAD GASKET SET, MULTI-LAYERED STEEL -- Includes 1 cylinder head gasket, 1 exhaust manifold gasket, 1 intake manifold gasket, 2 oil seals, 1 soft gasket, 1 valve cover gasket, and 16 valve stem seals; A high quality, OE replacement cylinder head gasket set; Backed by 1-year, unlimited-mileage warranty.

Type: Cylinder head, OE replacement

Quantity Sold: Set

Warranty: 1-year, unlimited-mileage warranty

Part #: REPM312715

CYLINDER HEAD GASKET SET, GRAPHITE -- Includes 1 cylinder head gasket, 3 exhaust manifold gaskets, 1 exhaust pipe gasket, 1 intake manifold gasket, 1 oil seal, 5 rubber seals, 9 soft gaskets, 1 upper intake manifold gasket, 1 valve cover gasket, and 12 valve stem seals; A high quality, OE replacement cylinder head gasket set; Backed by 1-year, unlimited-mileage warranty.

Type: Cylinder head, OE replacement

Quantity Sold: Set

Warranty: 1-year, unlimited-mileage warranty

Part #: REPM312721

DENSO PREMIUM CLASS IRIDIUM SPARK PLUG

Denso's Premium Class Iridium Spark Plugs is fast becoming the standard for today's high-tech engines. Employing a revolutionary 360 degrees laser welding process, Denso has created a spark plug unlike anything on the market today. Designed for durability under the most extreme conditions. Denso's patented Iridium alloy is 6 times harder and 8 times stronger than conventional platinum and can handle temperatures in excess of 4,000 degrees Fahrenheit.

Specification:

• 14 mm thread size
• 18 mm reach
• 0.63 in. hex size
• 0.04 in. gap size
• Tapered seat style
• Resistor plug type
• 0.4 mm iridium center electrode
• Tapered cut U-groove ground electrode
• Removable terminal
• Heat range 16

Features:

• Designed with heavy duty insulator that provides unparalleled dielectric strength and thermal conductivity under extreme temperatures
• Five-rib design prevents flashover while decreasing voltage loss
• Copper glass seal bonds the center electrode and insulator together for a gas-tight seal
• Platinum center electrode utilizes platinum to shrink the surface area of the center electrode tip for maximum firing performance and minimum voltage requirements
• Platinum ground electrode resists gas and electrical erosion and corrosion extending service intervals to 60,000 miles

Series: Denso Iridium Power

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NPIT16

MALLORY HYFIRE 6AL DIGITAL CD IGNITION -- A High Output Multi-Spark Ignition System, Uses The Latest Microprocessor Controlled Circuitry In The Market, Provides Quicker Acceleration And Throttle Response, Gives More Performance And Lower Power Draw, Guarantees Digital Performance For The Price Of An Analog, With A Built-in, Easy-to-adjust Digital Rev Limiter From 4,500 to 12,000 RPM With No Chips Required, Has A Lightweight Aluminum Housing For Maximum Heat Transfer, Works With Points, OEM, Aftermarket Electronic Ignition, Or Magnetic Crank Triggers, Easy Installation, With Mallory's 1-Year Limited Warranty

Type: Universal product

Condition: New

Quantity Sold: Sold individually

Part #: M116853M

CYLINDER HEAD GASKET SET -- A high quality, OE replacement cylinder head gasket set; Backed by 1-year, unlimited-mileage warranty.

Type: Cylinder head, OE replacement

Quantity Sold: Set

Warranty: 1-year, unlimited-mileage warranty

Part #: REPF312716