Eagle Denso Heater Blower Motor Information

4 SEASONS BLOWER MOTOR, SINGLE SHAFT VENTED -- 3 in. motor diameter, 4.125 in. motor length, 1.31 in. shaft diameter, 1.875 in. shaft length, 12 V; Reverse rotation; Without wheel; Features 6 lead wires with connectors - 3 speed motor;QS9000 and ISO 9000 certified; Designed to meet or exceed OE design and performance; Magnet size and properties can be compared or even exceed OEM.

Finish: Natural

Condition: New

Quantity Sold: Sold individually

Warranty: 120-day 4-Seasons limited warranty

Part #: FS35593

DENSO PREMIUM CLASS PLATINUM TWIN TIP SPARK PLUG

Denso's Premium Class Platinum Twin Tip Spark Plugs revolutionary twin tip design provides better ignitability for a more powerful and fuel-efficient combustion yielding better engine performance in terms of power and fuel economy.

Specification:

• 14 mm thread size
• 11.6 mm reach
• 0.63 in. hex size
• 0.04 in. gap size
• Tapered seat style
• Resistor plug type
• Platinum alloy 1.1 mm fine wire center electrode
• Titanium enhanced 1.5 mm fine wire ground electrode
• Solid terminal nut
• Heat range 20

Features:

• Greatly improves mileage
• Provides more power and faster starts
• Reduce carbon emissions

Series: Denso Platinum TT

Quantity Sold: Sold individually

Part #: NP4510

DENSO SUPER CLASS FIRST TIME FIT OXYGEN SENSOR

Denso Super Class First Time Fit Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 1-wire
• 14.57 in. lead wire

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

1 required per vehicle. This part does not require wire cutting.

Location: Before Catalytic Converter

Type: OE replacement, 1-wire

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2341001

DENSO PREMIUM CLASS IRIDIUM SPARK PLUG, SOLD INDIVIDUALLY -- 10 mm thread size, 19 mm reach, 16 mm hex size, gasket seat, resistor type, removable terminal nut, 0.4 mm Iridium center electrode, tapered cut U-groove ground electrode, 0.035 in. gap, 20 heat range; Designed with heavy duty insulator that provides unparalleled dielectric strength and thermal conductivity under extreme temperatures; Five-rib design prevents flashover while decreasing voltage loss; Copper glass seal bonds the center electrode and insulator together for a gas-tight seal; Platinum center electrode utilizes platinum to shrink the surface area of the center electrode tip for maximum firing performance and minimum voltage requirements; Platinum ground electrode resists gas and electrical erosion and corrosion extending service intervals to 60,000 miles; Replaces OE part number IU20.

Series: Denso Premium Class Iridium

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP5360

DENSO SUPER CLASS STARTER, REMANUFACTURED -- Features A Housing Re-Trapped To OEM Specifications And Damage-Checked For Heat Warping, Corrosion Or Improper Surface Alignment And Refinished, Polished Gauged And Performance Tested Commutator, 100% Voltage Tested Solenoid Coil, 100 Percent Re-Plated With Copper Terminal Bolts, Inspected, Stripped And High Voltage Tested Field Coil, Cleaned Armature, Torque-Tested And Re-Lubricated Clutch Assembly, Inspected And Replaced As Needed Pinion Gear To Meet Engineering Specifications, Precision Designed, Performance Tested, An OE-Standard Quality Starter

Condition: New

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2804114

4 SEASONS BLOWER MOTOR, SINGLE SHAFT CLOSED -- 3 in. motor diameter, 4.31 in. motor length, 0.31 in. shaft diameter, 2 in. shaft length, 2.31 in. stud distance, 12 V; Reverse rotation; Without wheel; Features 2 lead wires; QS9000 and ISO 9000 certified; Designed to meet or exceed OE design and performance; Magnet size and properties can be compared or even exceed OEM.

Finish: Natural

Condition: New

Quantity Sold: Sold individually

Warranty: 120-day 4-Seasons limited warranty

Part #: FS35508

DENSO REGULAR CLASS OXYGEN SENSOR

Denso Regular Class Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.

Specifications:

• 2-wire
• 11.77 in. lead wire
• Non-flanged

Features:

• Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
• Double protection layer
• Aluminum oxide trap layer
• Porous PTFE filter
• Stainless steel housing

1 required per vehicle. Requires wire splicing and electrical installation. Reuse your old connector.

Location: Before Catalytic Converter

Type: OE replacement, 2-wire

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NP2342000

DENSO PREMIUM CLASS IRIDIUM SPARK PLUG

Denso's Premium Class Iridium Spark Plugs is fast becoming the standard for today's high-tech engines. Employing a revolutionary 360 degrees laser welding process, Denso has created a spark plug unlike anything on the market today. Designed for durability under the most extreme conditions. Denso's patented Iridium alloy is 6 times harder and 8 times stronger than conventional platinum and can handle temperatures in excess of 4,000 degrees Fahrenheit.

Specification:

• 14 mm thread size
• 11.6 mm reach
• 0.63 in. hex size
• 0.04 in. gap size
• Tapered seat style
• Resistor plug type
• 0.4 mm iridium center electrode
• Tapered cut U-groove ground electrode
• Removable terminal
• Heat range 20

Features:

• Designed with heavy duty insulator that provides unparalleled dielectric strength and thermal conductivity under extreme temperatures
• Five-rib design prevents flashover while decreasing voltage loss
• Copper glass seal bonds the center electrode and insulator together for a gas-tight seal
• Platinum center electrode utilizes platinum to shrink the surface area of the center electrode tip for maximum firing performance and minimum voltage requirements
• Platinum ground electrode resists gas and electrical erosion and corrosion extending service intervals to 60,000 miles

Series: Denso Iridium Power

Quantity Sold: Sold individually

Warranty: 12-month Denso limited warranty

Part #: NPITF20

AUTOMETER PRO-COMP LIQUID-FILLED MECHANICAL BLOWER PRESSURE GAUGE -- 2-5/8 in.; 0 to 60 psi; Includes 6 ft. nylon tubing and 1/8 to 1/4 in. NPT adapter fittings; Features red pointer for quick glance monitoring and as a safeguard against dangerous conditions; Designed for precision movement and extreme accuracy; Recommends gauge mounting cup, gauge panel, mounting angle ring, and tachometer bracket.

Series: Autometer Pro-comp

Type: Universal product

Operation: Mechanical

Quantity Sold: Sold individually

Warranty: 1-year Autometer limited warranty

Part #: A485402

AUTOMETER SILVER LFGS BLOWER PRESSURE GAUGE -- 2-5/8 in.; 0 to 60 psi; Includes 10 ft. nylon tubing and 1/8 to 1/4 in. NPT adapter fittings; Features highly visible red pointer and durable steel case; Liquid filled for smooth pointer movement; Recommends gauge panel and mounting angle ring.

Series: Autometer Pro-Comp Silver

Type: Universal product

Operation: Mechanical

Quantity Sold: Sold individually

Warranty: 1-year Autometer limited warranty

Part #: A484602