Chevrolet Eibach Shocks Information

COMPLETE GRILLE AND SHELL ASSEMBLY, PLASTIC, BLACK -- With emblem provision; A high quality, OE replacement complete grille and shell assembly; Backed by 1-year, unlimited-mileage warranty.

Finish: Black

Material: Plastic shell and insert

Type: OE replacement

Quantity Sold: Sold individually

Warranty: 1-year, unlimited-mileage warranty

Part #: 6959

MBRP XP SERIES DUAL TURBO-BACK EXHAUST SYSTEM, STAINLESS STEEL, NATURAL FINISH -- For off road use - Not legal for use on public roads and highways; Boosts performance up to 18 h.p. and 28 lb.-ft. of torque; 4 in. main piping diameter, 4 in. tail pipe diameter; Split side exit; Single inlet and dual outlet muffler configuration; Includes muffler, pipes, clamps, hangers, and dual polished T-304 stainless steel tips with round shape, angle cut, and non-rolled edge design; Made of rugged 16-gauge T-409 stainless steel that withstands everything from salt to rock and tar to grime; Mounts to the catalytic converter; Designed to get the maximum power and performance while still keeping the vehicle legal for highway use; Improves throttle response and minimizes backpressure; Improves fuel economy by 1 to 2 MPG; Delivers a rich and mellow exhaust note; Easy bolt-on installation, no welding required.

Finish: Natural

Material: Stainless steel

Series: MBRP XP Cool Dual

Type: Direct fit, for off road/track use

Quantity Sold: Assembly

Part #: M79S6006409

CORSA SPORT EXHAUST SYSTEM

Corsa's Sport exhaust system focuses on delivering the best of what you want to enhance your driving experience. This system features RSC (Reflective Sound Cancellation) technology that eliminates problem frequencies that cause interior drone or resonance at cruising speed. Its patented non-restrictive straight-through design reduces back-pressure and frees up additional power translating to better engine efficiency and improved fuel economy.

Specifications

• Axle-back exhaust system
• Dual rear exit
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• Two mufflers
• Quad 3.5 in. polished stainless steel tips with round shape, angle cut, and double wall, rolled edge design

Features

• 64% increase in exhaust flow
• T-304L stainless steel tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Natural

Material: Stainless steel

Series: Corsa Sport

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Corsa limited warranty

Part #: COR14169

DYNOMAX SUPER TURBO DUAL EXHAUST SYSTEM

Dynomax's Super Turbo exhaust system features a direct fit Super Turbo muffler that provides sharper appearance and longer service life. This muffler has an exclusive Dynomax patented flow directors that channels exhaust flow and eliminates turbulence while its large diameter internal tubes maximizes the entire system's efficiency. It follows the OE routing and attaches directly to OE mounting locations. The muffler uses a fiberglass matting for mellow and true performance sound and reduces back pressure for increased horsepower and fuel economy.

Specifications

• Cat-back exhaust system
• Split rear exit
• 2.25 in. main piping diameter
• 2.5 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• Two mufflers
• Dual 2.5 in. chrome steel tips with round shape, angle cut, and non-rolled edge design

Features

• Mandrel-bent tubing

Notes

• 50-state legal
• Clamp-on attachment style

Finish: Natural

Material: Aluminized steel

Series: Dynomax Super Turbo

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Dynomax limited warranty

Part #: D2219363

MAGNAFLOW EXHAUST SYSTEM

Magnaflow's exhaust system is made of 100 percent tough and durable stainless steel. It is dyno tested and proven to increase horsepower and torque while its mandrel-bent tubing provides better exhaust flow for optimum performance. Delivers a smooth and deep exhaust tone. Nothing performs better, looks better, or sounds better than Magnaflow performance exhaust.

Features

• Mandrel-bent tubing

Notes

• 50-state legal

Finish: Natural

Material: Stainless steel

Series: Magnaflow Performance

Type: Direct fit, 50-state legal

Exit: Rear

Quantity Sold: Assembly

Part #: M6616728

MAGNAFLOW EXHAUST SYSTEM

Magnaflow's exhaust system is made of 100 percent tough and durable stainless steel. It is dyno tested and proven to increase horsepower and torque while its mandrel-bent tubing provides better exhaust flow for optimum performance. Delivers a smooth and deep exhaust tone. Nothing performs better, looks better, or sounds better than Magnaflow performance exhaust.

Specifications

• Cat-back exhaust system
• Dual rear exit
• 2.5 in. main piping diameter
• Single inlet and outlet muffler configuration
• Two mufflers
• Quad 3 in. polished stainless steel tips with round shape, angle cut, and rolled edge design

Features

• 10% increase in horsepower
• Mandrel-bent tubing

Notes

• 50-state legal
• Weld-on attachment style

Finish: Natural

Material: Stainless steel

Series: Magnaflow Performance

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Magnaflow limited warranty

Part #: M6616841

FUEL PUMP MODULE ASSEMBLY, ELECTRIC, NEW

30 to 35 gallons per hour; Gerotor type; Built to match OE specifications to provide exceptional and continuous fuel delivery; Features OE matched electrical connections, inlet and outlet positions, and precise diameter and length. It is 100 percent factory-tested.

Supplied by ISO-9001 and QS-9000 manufacturing facility and backed by 1-year, unlimited-mileage warranty. Replace your damaged fuel pump with this affordable but reliable item we offer!

Type: OE replacement

Operation: Electric

Condition: New

Quantity Sold: Assembly

Warranty: 1-year, unlimited-mileage warranty

Part #: REPC314504

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Split rear exit
• 2.25 in. main piping diameter
• 2 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• Two mufflers
• Dual 3.5 in. polished stainless steel tips with round shape, angle cut, and intercooled edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Natural

Material: Stainless steel

Series: Borla Performance

Type: Direct fit, 50-state legal

Exit: Split rear

Tip Shape: Round

Tip Style: Intercooled

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2514504

MAGNAFLOW CATALYTIC CONVERTER ASSEMBLY

Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond. Designed to exact original equipment specifications.

Specifications

• 3-way catalyst style
• Flange inlet
• Flange outlet
• Standard assembly with one catalytic converter
• Round body
• Single inlet and outlet configuration

Notes

• Direct fit catalytic converter legal for sale in California under Executive Order (EO) number D-193-67. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
• May require additional welding for optimal installation

Finish: Natural

Type: Minor modifications required, 50-state legal

Quantity Sold: Assembly

Warranty: Magnaflow limited warranty

Part #: M6646433

MAGNAFLOW CATALYTIC CONVERTER ASSEMBLY

Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond. Designed to exact original equipment specifications.

Specifications

• 3-way catalyst style
• Flange inlet
• Flange outlet
• Standard assembly with one catalytic converter
• Round body
• Single inlet and outlet configuration

Notes

• Direct fit catalytic converter legal for sale in California under Executive Order (EO) number D-193-67. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
• May require additional welding for optimal installation

Finish: Natural

Location: Front

Type: Minor modifications required, 50-state legal

Quantity Sold: Assembly

Warranty: Magnaflow limited warranty

Part #: M6646433