Hummer Eibach Shocks Information

MAGNAFLOW EXHAUST SYSTEM

Magnaflow's exhaust system is made of 100 percent tough and durable stainless steel. It is dyno tested and proven to increase horsepower and torque while its mandrel-bent tubing provides better exhaust flow for optimum performance. Delivers a smooth and deep exhaust tone. Nothing performs better, looks better, or sounds better than Magnaflow performance exhaust.

Specifications

• Cat-back exhaust system
• Split rear exit
• 3 in. main piping diameter
• 2.5 in. tail pipe diameter
• Dual inlet and outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Dual 4 in. polished stainless steel tips with round shape, angle cut, and non-rolled edge design

Features

• Mandrel-bent tubing

Notes

• 50-state legal
• Clamp-on attachment style

Finish: Natural

Material: Stainless steel

Series: Magnaflow Performance

Type: Direct fit, 50-state legal

Exit: Rear

Quantity Sold: Assembly

Warranty: Lifetime Magnaflow limited warranty

Part #: M6616673

BORLA UNIVERSAL HOT ROD KIT

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Header-back exhaust system
• Dual rear exit
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Two mufflers
• Dual 3 in. polished stainless steel tips with round shape, straight cut, and phantom edge design

Features

• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Polished

Material: Stainless steel

Series: Borla Universal Hot Rod

Type: Universal product, 50-state legal

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2510512

AFE MAGNUM FORCE STAGE 2 COLD AIR INTAKE SYSTEM -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; Provides additional power up to 50 h.p.; Increases airflow up to 19 percent; 98.6 percent filtration efficiency; Includes Pro 5R air filter that is made of five layers of progressively finer medical-grade cotton gauze, durable 16-gauge powdercoated steel heat shield that seals to the hood, and molded plastic intake tube with black OE look finish; Delivers aggressive great performance sound and increases fuel economy; Features a premium quality construction that is engineered to deliver maximum performance within the stock engine configuration; Its larger, washable, and reusable lifetime filter with 360-degree radial free flowing conical design accelerates and enhances airflow; No cutting or drilling required; It has pre-positioned opening for stock attachments to avoid dangling wires and relocating of hoses or tubes.

Series: AFE Magnum force stage 2

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: 2-year AFE limited warranty

Part #: A155410402

AFE MAGNUM FORCE STAGE 1 XP COLD AIR INTAKE SYSTEM -- 50-state legal; XL canister; Provides additional power up to 21 h.p. and 36 lb.-ft. at 5300 RPM torque; Increases airflow up to 50 percent; Includes Pro Guard 7 air filter that is made of patented seven layers of media that consists of five layers of cotton gauze and two layers of random porosity, 3-angle velocity stack adapter, adjustable ram-scoop, durable cover that allows great seal against all conditions, and dzus fasteners for easy filter access; Universal off-road canister; Replaces OE air filter with a revolutionary Pro-Dry S filter that provides maximum protection against extreme dirt and dust conditions; Delivers aggressive performance sound; Trim sealed or covered to seal out hot engine air; Features washable and reusable filter that comes with the industry's deepest pleats for greater flow and dust holding capacity; Pre-positioned opening for stock attachments to avoid dangling wires and relocating of hoses or tubes; For use in off-road applications.

Series: AFE Magnum force stage 1 XP

Type: Minor modifications required, 50-state legal

Quantity Sold: Assembly

Warranty: 2-year AFE limited warranty

Part #: A157511061

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AL

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AS

EDELBROCK PERFORMER RPM CAMSHAFT, FOR CHEVY V8 SMALL BLOCK ENGINES ONLY -- 234 intake/244 exhaust duration at 0.50 in. lift, 308 intake/318 exhaust advertised duration, 0.488 in. intake/0.510 in. exhaust valve lift, 0.325 in. intake/0.340 in. exhaust camshaft lift, 10 degrees BTDC open/44 degrees BTDC close intake timing at 0.050 in., 59 degrees BBDC open/5 degrees ATDC close exhaust timing at 0.050 in., 112 degrees lobe separation/107 degrees centerline intake, 1,500-6,500 operating RPM range, hydraulic flat tappet camshaft/lifter style; Includes assembly lubricant; Does not include valve springs, retainers, locks, valve stem seals, timing chain and gears, pushrods, rocker arms, and gaskets; Designed with more lift and duration for more aggressive street performance applications; Dyno-matched to Performer RPM manifolds for high-rpm horsepower while maintaining acceptable low-end torque; Not legal for sale or use on pollution-controlled motor vehicles.

Quantity Sold: Assembly

Warranty: 90-day Edelbrock limited warranty

Part #: E117102

RANCHO SHOCK BOOT, RED, SOLD INDIVIDUALLY -- 9.5 in. long; This high quality shock boot protects your shock absorber from contaminants to ensure its prolonged life and optimal performance.

Finish: Red

Type: Universal product

Quantity Sold: Sold individually

Part #: R38RS1927

TUFF COUNTRY EZ-RIDE SX6000 NITROGAS SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY

Tuff Country EZ-Ride SX6000 Shock Absorbers are especially engineered for mini and mid-size applications. These shock absorbers underwent multi-stage valving for a controlled and easy ride on any road conditions.

Specifications:

• 26.5 in. extended length
• 16 in. collapsed length
• Loop upper mount style
• Loop lower mount style

Features:

• Comes with polyurethane bushings and mounting hardware
• Handles severe off-road terrain and offers comfortable on-road ride

Some applications may require additional mounting hardware. Fits vehicles lifted 2-6 in.

Finish: White

Location: Rear

Series: Tuff Country EZ-Ride SX6000

Quantity Sold: Sold individually

Part #: TUF62261

FABTECH PERFORMANCE SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY

Upgrade your suspension operation with Fabtech Shock Absorber. This shock is capable of absorbing and controlling the movements of the vehicle into the suspension, and also makes the drive comfortable and manageable. It could greatly reduce and minimize the aftereffect movements or aftershocks suffered by the vehicle when passing over an unforgiving terrain. Along with this efficiency, this product is also recognized for its durability and longevity. It could stand the toughest and most harsh road conditions for several years.

Specifications:

• 32.95 in. extended length
• 18.92 in. collapsed length
• 2.38 in. body diameter
• 1 in. ID eye ring-and-bushing upper and lower mount style
• 1.38 in. OD piston and a 0.56 in. hardened chrome piston rod

Features:

• OE single twin tube hydraulic shock absorber features high velocity 9-stage valving for excellent dampening and a closed cell foam insert for shock fade prevention
• Designed to work with each Fabtech suspension system for superior ride control

Finish: White

Location: Rear

Series: Fabtech Performance

Type: Shock absorber

Quantity Sold: Sold individually

Warranty: Lifetime Fabtech limited warranty

Part #: F37FTS7266