Eagle Gates Coolant & Antifreeze Information

GATES DURION HEATER HOSE -- A High Quality Heater Hose, Centerline Length 50 ft., I.D. 0.75

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GAT28412

GATES SS HEATER HOSE -- 0.625 in. ID, 60 psi working pressure; Features good resistance to high temperatures and non-oil based coolant additives and moderate resistance to oil and grease contamination; Tested to assure reliability; A high quality, direct fit OE replacement heater hose; Similar to SAE 20R3 class D-2; Do not use for fuel or oil transfer applications.

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GAT28411

GATES MICRO V BELT -- A High Quality Micro V-Belt

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GATK060910

GATES BULK POWER STEERING HOSE, RETURN / LOW PRESSURE SIDE -- Trim to fit; 25 in. length; 0.375 in. inner diameter; This is a high quality power steering return / low pressure hose.

Type: Direct OE replacement

Quantity Sold: Sold individually

Part #: GAT350010

GATES CURVED COOLANT HOSE -- A High Quality Curved Coolant Hose, Centerline Length 15.3, I.D. 1.5 x 1.75

Finish: Black

Location: Lower

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GAT20573

GATES SID COOLANT HOSE -- 9.6 in. centerline L, 0.31 in. ID; Designed to fit tighter-fitting engine components; Resists electrochemical degradation; Can be used for coolant, water and air applications; A high quality, direct fit OE replacement coolant hose; Meets SAE 20R3 type EC class D-1 and D-2 specifications; Replacing of all clamps when replacing the hose is recommended; Do not use For fuel or oil transfer applications.

Finish: Black

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GAT18020

GATES DRIVEALIGN IDLER PULLEY, STEEL -- 30 mm W, 17 mm bearing bore ID, 90 mm OD, 6-rib V-ribbed belt type; Features high quality and high strength bearings that run cooler and outlast original bearings; Has reinforced polymer construction to resist under-hood contaminants; Meets or exceeds OEM specifications; For use on vehicles with locked center and automatic tensioners; With lifetime Gates limited warranty.

Quantity Sold: Sold individually

Part #: GAT38042

GATES MICRO-V BELT -- 34.75 in. effective length, 35.31 in. outside circumference, 0.56 in. top width; The belt construction eliminates noise, reduces tension loss, and solves problem drives; Features added tensile members and rib reinforcement for wear and crack resistance; Meets or exceeds SAE J1459 specifications; Designed for small diameter pulley, backside idler and automatic tensioner; Replaces belts on serpentine drive and other V-ribbed belt applications.

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GATK040347

GATES MICRO-V BELT -- 36.14 in. effective length, 36.71 in. outside circumference, 0.56 in. top width; The belt construction eliminates noise, reduces tension loss, and solves problem drives; Features added tensile members and rib reinforcement for wear and crack resistance; Meets or exceeds SAE J1459 specifications; Designed for small diameter pulley, backside idler, and automatic tensioner; Replaces belts on serpentine drive and other V-ribbed belt applications; With lifetime Gates limited warranty.

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GATK040360

GATES AUTO XL V BELT -- A High Quality Auto XL V Belt, Effective Length 52.5, Outside Circumference 53.08, Top Width 0.41

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GAT7525