Ford Gates Coolant & Antifreeze Information

GATES DURION HEATER HOSE -- A High Quality Heater Hose, Centerline Length 50 ft., I.D. 0.75

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GAT28412

GATES PowerGrip TIMING BELT TENSIONER -- A High Quality Timing Belt Tensioner, Pulley Bore I.D.%XA010.3mm x Pulley O.D.%XA052mm x Pulley Width%XA028.5mm

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GATT42008

GATES MICRO-V BELT -- 94.19 in. effective length, 94.76 in. outside circumference, 0.81 in. top width; The belt construction eliminates noise, reduces tension loss, and solves problem drives; Features added tensile members and rib reinforcement for wear and crack resistance; Meets or exceeds SAE J1459 specifications; Designed for small diameter pulley, backside idler and automatic tensioner; Replaces belts on serpentine drive and other V-ribbed belt applications.

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GATK060942

GATES SS HEATER HOSE -- 0.625 in. ID, 60 psi working pressure; Features good resistance to high temperatures and non-oil based coolant additives and moderate resistance to oil and grease contamination; Tested to assure reliability; A high quality, direct fit OE replacement heater hose; Similar to SAE 20R3 class D-2; Do not use for fuel or oil transfer applications.

Location: Upper

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GAT28411

GATES SS HEATER HOSE -- 0.625 in. ID, 60 psi working pressure; Features good resistance to high temperatures and non-oil based coolant additives and moderate resistance to oil and grease contamination; Tested to assure reliability; A high quality, direct fit OE replacement heater hose; Similar to SAE 20R3 class D-2; Do not use for fuel or oil transfer applications.

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GAT28411

GATES MOLDED COOLANT HOSE -- 18 in. centerline length, 1.75 in. inside diameter; Designed to fit tighter-fitting engine components; Resists electrochemical degradation; Can be used for coolant, water and air applications; A high quality, OE replacement coolant hose; Meets SAE 20R4 and 20R3 type EC class D-1 and D-2 specifications; Replacing of all clamps when replacing the hose is recommended; Do not use For fuel or oil transfer applications; With lifetime Gates limited warranty.

Finish: Black

Location: Upper

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GAT20046

GATES MOLDED COOLANT HOSE -- 18 in. centerline length, 1.75 in. inside diameter; Designed to fit tighter-fitting engine components; Resists electrochemical degradation; Can be used for coolant, water and air applications; A high quality, OE replacement coolant hose; Meets SAE 20R4 and 20R3 type EC class D-1 and D-2 specifications; Replacing of all clamps when replacing the hose is recommended; Do not use For fuel or oil transfer applications; With lifetime Gates limited warranty.

Finish: Black

Location: Lower

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GAT20046

GATES CURVED COOLANT HOSE -- A High Quality Curved Coolant Hose, Centerline Length 23, I.D. 1.5 x 1.75

Finish: Black

Location: Lower

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GAT20767

GATES MICRO-V BELT -- A High Quality Micro-V Belt, Effective Length 77.48, Outside Circumference 78.04, Top Width 0.807

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GATK060775

GATES MICRO V BELT -- A High Quality Micro-V Belt, Effective Length 97.54 x 98.11 x 0.807

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GATK060975