Toyota K&N Filters Con Rod Bearings Information

BORLA UNIVERSAL HOT ROD KIT

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Header-back exhaust system
• Dual rear exit
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Two mufflers
• Dual 3 in. polished stainless steel tips with round shape, straight cut, and phantom edge design

Features

• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Polished

Material: Stainless steel

Series: Borla Universal Hot Rod

Type: Universal product, 50-state legal

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2510512

K&N 63 SERIES AIRCHARGER COLD AIR INTAKE KIT

K&N's 63 Series Aircharger cold air intake kit is designed to replace your vehicle's restrictive factory air filter and air intake housing. It dramatically reduces intake restriction resulting in additional power and torque. Custom engineered and aerodynamically designed to drive more air into your engine. Its air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Series: K&N 63 Aircharger

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Assembly

Part #: K33639026

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AL

K&N AIR FILTER RECHARGER SERVICE KIT -- Aerosol spray can; A six-step maintenance system designed to recharge your K&N Air Filter; Restores air flow efficiency; For use on K&N filters only.

Type: Universal product

Quantity Sold: Kit

Part #: K33995000

K&N 77 SERIES HIGH FLOW PERFORMANCE AIR INTAKE KIT

K&N's 77 Series high-flow performance air intake kit is designed to replace your vehicle's restrictive factory air filter and air intake housing. It dramatically reduces intake restriction resulting in additional power and torque. Custom engineered and aerodynamically designed to drive more air into your engine. Its air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Polished tube finish
• T-6063 aluminum tube material

Features

• Provides power up to 9.27 h.p. at 4620 rpm
• Up to 99% filtration efficiency
• Mandrel-bent tubing
• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Product legal for sale in California under Executive Order (EO) number D-269-31. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: K&N 77

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33779015KP

K&N 69 SERIES TYPHOON SHORT-RAM AIR INTAKE SYSTEM -- Provides additional power up to 5.88 h.p. at 6400 RPM; 96 to 99 percent filtration efficiency; Includes red intake tube, red air filter, and all the hardware necessary for installation; High-flow intake kit for sport compact and sports car; Features T-6063 aluminum intake tube that is custom engineered and aerodynamically designed to drive air into your engine; Its washable and reusable air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow; Virtually eliminates intake tract restriction by replacing the air filter and the entire air path to the engine; Can go up to 100,000 miles between cleanings depending on driving conditions; Easy to install. Product legal for sale in California under Executive Order (EO) number D-269-30. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: K&N 69 Typhoon

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33698520TR

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AS

LISLE UNIVERSAL CAMSHAFT BEARING TOOL SET -- 1.125 to 2.690 in. size range; Includes driving shaft, driving shaft extension, expander unit, five expanding collets, five sleeve sets, two driving collars, centering cone, and blow molded case; Removes or inserts camshaft bearings in nearly all engines from compact cars to heavy trucks; Easy on bearings.

Quantity Sold: Set

Part #: L1718000

K&N INJECTOR STACK AIR FILTER

K&N's injector stack air filter is made of multiple interwoven layers of surgical cotton gauze that provides high air flow with excellent filtration. Economical and environment friendly, this air filter increases horsepower and acceleration while providing engine protection.

Specifications

• 6 in. height, 2.06 in. flange inside diameter, 0.63 in. flange length, 3 in. outside diameter
• Round straight style

Features

• Provides 1 to 4 h.p.
• Washable and reusable
• Chrome end cap

Notes

• For Hilborn 4, injectors fitted to Honda and Kawasaki engines in T.Q. midgets

Material: Cotton gauze

Type: High flow

Quantity Sold: Sold individually

Part #: K33RD1004

BECK ARNLEY WHEEL BEARING, SOLD INDIVIDUALLY -- A high quality, direct fit OE replacement wheel bearing.

Location: Rear

Type: Direct OE replacement

Quantity Sold: Sold individually

Warranty: 12-month or 12,000-mile Beck Arnley limited warranty

Part #: 051-4119