Land Rover Lemforder Strut Assembly Information

MAGNAFLOW CAT-BACK EXHAUST SYSTEM, STAINLESS STEEL, NATURAL FINISH -- 50-state legal; Designed and tested to meet legal sound level limits; Increases horsepower on an average range of 10 percent; 2.5 in. main piping diameter, 2.5 in. tail pipe diameter; Dual rear exit; Single inlet and outlet muffler configuration; Includes 5 in. x 8 in. x 18 in. stainless steel muffler, clamps, pipes, and dual 3 in. polished T-304 stainless steel tips with round shape, angle cut, and rolled edge design; Made of 100 percent tough and durable stainless steel; Dyno tested and proven to provide performance gains in horsepower and torque; Delivers great sound with a smooth and deep tone; Built to last, all welded, and mandrel-bent; Easy weld-on installation.

Finish: Natural

Material: Stainless steel

Series: Magnaflow Performance

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Magnaflow limited warranty

Part #: M6616888

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Single rear exit
• 2 in. main piping diameter
• 2.25 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Single 4 in. polished stainless steel tip with round shape, angle cut, and phantom edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Natural

Material: Stainless steel

Series: Borla Performance

Type: Direct fit, 50-state legal

Exit: Rear

Tip Shape: Round

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2514814

BORLA UNIVERSAL HOT ROD KIT

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Header-back exhaust system
• Dual rear exit
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Two mufflers
• Dual 3 in. polished stainless steel tips with round shape, straight cut, and phantom edge design

Features

• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Polished

Material: Stainless steel

Series: Borla Universal Hot Rod

Type: Universal product, 50-state legal

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2510512

AFE MAGNUM FORCE STAGE 1 XP COLD AIR INTAKE SYSTEM -- 50-state legal; XL canister; Provides additional power up to 21 h.p. and 36 lb.-ft. at 5300 RPM torque; Increases airflow up to 50 percent; Includes Pro Guard 7 air filter that is made of patented seven layers of media that consists of five layers of cotton gauze and two layers of random porosity, 3-angle velocity stack adapter, adjustable ram-scoop, durable cover that allows great seal against all conditions, and dzus fasteners for easy filter access; Universal off-road canister; Replaces OE air filter with a revolutionary Pro-Dry S filter that provides maximum protection against extreme dirt and dust conditions; Delivers aggressive performance sound; Trim sealed or covered to seal out hot engine air; Features washable and reusable filter that comes with the industry's deepest pleats for greater flow and dust holding capacity; Pre-positioned opening for stock attachments to avoid dangling wires and relocating of hoses or tubes; For use in off-road applications.

Series: AFE Magnum force stage 1 XP

Type: Minor modifications required, 50-state legal

Quantity Sold: Assembly

Warranty: 2-year AFE limited warranty

Part #: A157511061

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AL

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AS

EDELBROCK PERFORMER RPM CAMSHAFT, FOR CHEVY V8 SMALL BLOCK ENGINES ONLY -- 234 intake/244 exhaust duration at 0.50 in. lift, 308 intake/318 exhaust advertised duration, 0.488 in. intake/0.510 in. exhaust valve lift, 0.325 in. intake/0.340 in. exhaust camshaft lift, 10 degrees BTDC open/44 degrees BTDC close intake timing at 0.050 in., 59 degrees BBDC open/5 degrees ATDC close exhaust timing at 0.050 in., 112 degrees lobe separation/107 degrees centerline intake, 1,500-6,500 operating RPM range, hydraulic flat tappet camshaft/lifter style; Includes assembly lubricant; Does not include valve springs, retainers, locks, valve stem seals, timing chain and gears, pushrods, rocker arms, and gaskets; Designed with more lift and duration for more aggressive street performance applications; Dyno-matched to Performer RPM manifolds for high-rpm horsepower while maintaining acceptable low-end torque; Not legal for sale or use on pollution-controlled motor vehicles.

Quantity Sold: Assembly

Warranty: 90-day Edelbrock limited warranty

Part #: E117102

KYB STRUT BOOT, BLACK, SOLD INDIVIDUALLY -- Includes a travel-limiting bumper that prevents the strut from bottoming out; This high quality strut boot keeps dirt away from your strut to prolong its optimum performance.

Finish: Black

Location: Front, Driver Or Passenger Side

Type: Direct OE replacement

Quantity Sold: Sold individually

Warranty: 1-year KYB limited warranty

Part #: KYSB105

SKYJACKER HYDRO 7000 SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY

Be in control of the road ahead with Skyjacker Hydro 7000 Shock Absorbers. The technological innovations of these long lasting shocks allow them to respond to on- and off-road conditions instantly. Do mild or moderate off-roading at slow or fast speeds, and the consistent hydraulic action and true velocity sensitive valving of these shocks will deliver better handling, improved stability, and maximum comfort all the same.

Specifications:

• 22.58 in. extended length
• 13.71 in. collapsed length
• 8.87 in. damper travel
• Loop upper mount style
• Loop lower mount style

Features:

• Multistage velocity sensitive valving provides faster response
• Drawn over mandrel tubing reduces internal wear for longer product life
• Bonded iron piston and chromed piston rod with micro pores for durability
• Polyurethane bushings and boot for protection from dirt and moisture build-up
• Leak proof seal prevents hydraulic fluid from passing around piston head for a consistent and reliable ride

Finish: White

Location: Front

Series: Skyjacker Hydro 7000

Type: Shock absorber

Quantity Sold: Sold individually

Warranty: Lifetime Skyjacker limited warranty

Part #: S97H7023

RANCHO RS9000XL SHOCK ABSORBER, LIQUID METALLIC FINISH, SOLD INDIVIDUALLY -- 21.875 in. extended length, 14.25 in. collapsed length, bushing upper mount, bushing lower mount; Includes boot and polyurethane bushings; This twin tube gas shock absorber has 9-position adjustability and allows for both manual adjustment and in-cab remote adjustments via MyRide Wireless Tuning technology..

Finish: Silver

Location: Rear

Series: Rancho RS9000XL

Type: Shock absorber

Quantity Sold: Sold individually

Warranty: Lifetime Rancho limited warranty

Part #: R38RS999144