Porsche Lemforder Strut Assembly Information

BORLA AGGRESSIVE EXHAUST SYSTEM

Borla's Aggressive exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Dual rear exit
• 2.25 in. main piping diameter
• 2.25 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• Four mufflers
• Pipe(s) included
• Dual 4 in. polished stainless steel tips with round shape, angle cut, and rolled edge design

Features

• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• For off road use - Not legal for use on public roads and highways
• Clamp-on attachment style

Finish: Natural

Material: Stainless steel

Type: Direct fit, for off road/track use

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2512659

BORLA UNIVERSAL HOT ROD KIT

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Header-back exhaust system
• Dual rear exit
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Two mufflers
• Dual 3 in. polished stainless steel tips with round shape, straight cut, and phantom edge design

Features

• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Polished

Material: Stainless steel

Series: Borla Universal Hot Rod

Type: Universal product, 50-state legal

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2510512

KYB STRUT BOOT, BLACK, SOLD INDIVIDUALLY -- Includes a travel-limiting bumper that prevents the strut from bottoming out; This high quality strut boot keeps dirt away from your strut to prolong its optimum performance. Built with quality that matches or exceeds OE design.

Finish: Black

Location: Rear

Type: Direct OE replacement

Quantity Sold: Sold individually

Warranty: 1-year KYB limited warranty

Part #: KYSB108

AFE MAGNUM FORCE STAGE 1 XP COLD AIR INTAKE SYSTEM -- 50-state legal; XL canister; Provides additional power up to 21 h.p. and 36 lb.-ft. at 5300 RPM torque; Increases airflow up to 50 percent; Includes Pro Guard 7 air filter that is made of patented seven layers of media that consists of five layers of cotton gauze and two layers of random porosity, 3-angle velocity stack adapter, adjustable ram-scoop, durable cover that allows great seal against all conditions, and dzus fasteners for easy filter access; Universal off-road canister; Replaces OE air filter with a revolutionary Pro-Dry S filter that provides maximum protection against extreme dirt and dust conditions; Delivers aggressive performance sound; Trim sealed or covered to seal out hot engine air; Features washable and reusable filter that comes with the industry's deepest pleats for greater flow and dust holding capacity; Pre-positioned opening for stock attachments to avoid dangling wires and relocating of hoses or tubes; For use in off-road applications.

Series: AFE Magnum force stage 1 XP

Type: Minor modifications required, 50-state legal

Quantity Sold: Assembly

Warranty: 2-year AFE limited warranty

Part #: A157511061

K&N 57 SERIES GENERATION II FIPK COLD AIR INTAKE SYSTEM

K&N's 57 Series Generation II FIPK (Fuel Injection Performance Kit) cold air intake system is designed to significantly reduce intake restriction as it smoothens and straightens air flow resulting to additional power and torque. It is custom engineered and aerodynamically designed to drive more air into your engine. Its air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Mounting hardware included
• Black tube finish
• Plastic tube material

Features

• Provides power up to 23.80 h.p. at 5500 rpm
• Up to 99% filtration efficiency
• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Product legal for sale in California under Executive Order (EO) number D-269-34. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: K&N 57 Generation II

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33577000

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AL

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AS

EDELBROCK PERFORMER RPM CAMSHAFT, FOR CHEVY V8 SMALL BLOCK ENGINES ONLY -- 234 intake/244 exhaust duration at 0.50 in. lift, 308 intake/318 exhaust advertised duration, 0.488 in. intake/0.510 in. exhaust valve lift, 0.325 in. intake/0.340 in. exhaust camshaft lift, 10 degrees BTDC open/44 degrees BTDC close intake timing at 0.050 in., 59 degrees BBDC open/5 degrees ATDC close exhaust timing at 0.050 in., 112 degrees lobe separation/107 degrees centerline intake, 1,500-6,500 operating RPM range, hydraulic flat tappet camshaft/lifter style; Includes assembly lubricant; Does not include valve springs, retainers, locks, valve stem seals, timing chain and gears, pushrods, rocker arms, and gaskets; Designed with more lift and duration for more aggressive street performance applications; Dyno-matched to Performer RPM manifolds for high-rpm horsepower while maintaining acceptable low-end torque; Not legal for sale or use on pollution-controlled motor vehicles.

Quantity Sold: Assembly

Warranty: 90-day Edelbrock limited warranty

Part #: E117102

RANCHO SHOCK BOOT, RED, SOLD INDIVIDUALLY -- 9.5 in. long; This high quality shock boot protects your shock absorber from contaminants to ensure its prolonged life and optimal performance.

Finish: Red

Type: Universal product

Quantity Sold: Sold individually

Part #: R38RS1927

HOLLEY AVENGER EFI MULTI-POINT FUEL INJECTION SYSTEM -- For off road use - Not legal for use on public roads and highways; 4bbl fuel injection; Includes intake manifold, billet throttle body, ECU, wiring harness, fuel rails, sensors, in-line pump, injectors, fuel pump and mounting hardware to retrofit EFI on a non-EFI vehicle; Comes with full color OLED hand-held tuner that guarantees simple setup and self-tuning strategy of basic parameters such as engine idle speed; Features dedicated fuel and oil pressure inputs for better flow; Helps you maximize performance; Allows computer controlled ignition timing; Can be upgraded to a Holley HP EFI System; Does not include return fuel line to tank; Easy bolt-on installation.

Quantity Sold: Assembly

Warranty: 90-day Holley limited warranty

Part #: H19550836