Mercury Magnaflow Catalytic Converter Information

MAGNAFLOW CATALYTIC CONVERTER ASSEMBLY

Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond. Designed to exact original equipment specifications.

Specifications

• 3-way catalyst style
• Flange inlet
• Flange outlet
• X-pipe assembly with four catalytic converters
• Oval body
• Single inlet and outlet configuration

Notes

• 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
• May require additional welding for optimal installation

Finish: Natural

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Sold individually

Warranty: Lifetime Magnaflow limited warranty

Part #: M6693332

MAGNAFLOW CATALYTIC CONVERTER ASSEMBLY

Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond. It includes performance pipes, which allows for better exhaust gas scavenging, noise cancellation, and better balance between cylinder banks. Designed to exact original equipment specifications.

Specifications

• 3-way catalyst style
• Y-pipe assembly with three catalytic converters
• Oval body
• 44.25 in. overall length
• Single inlet and outlet configuration

Notes

• 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses

Finish: Natural

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Sold individually

Warranty: Lifetime Magnaflow limited warranty

Part #: M6623325

MAGNAFLOW 99000 SERIES HEAVY METAL SPUN CATALYTIC CONVERTER

This series of Magnaflow catalytic converter is loaded with heavy metal catalyst. It has larger catalyst volume and greater concentrations of catalytically active materials. Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond.

Specifications

• 6,375 lbs. GVW
• Round body
• 9 in. L x 5.13 in. W, 13 in. overall length
• 2 in. inlet diameter
• 2 in. outlet diameter
• Single inlet and outlet configuration

Notes

• 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
• May require additional welding for optimal installation
• One unit may cover a wide variety of vehicle makes and models

Finish: Natural

Location: Front

Series: Magnaflow 99000 Heavy Metal

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Sold individually

Warranty: Lifetime Magnaflow limited warranty

Part #: M6699204HM

MAGNAFLOW 99000 SERIES HEAVY METAL SPUN CATALYTIC CONVERTER

This series of Magnaflow catalytic converter is loaded with heavy metal catalyst. It has larger catalyst volume and greater concentrations of catalytically active materials. Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond.

Specifications

• 6,375 lbs. GVW
• Round body
• 9 in. L x 5.13 in. W, 13 in. overall length
• 2 in. inlet diameter
• 2 in. outlet diameter
• Single inlet and outlet configuration

Notes

• 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
• May require additional welding for optimal installation
• One unit may cover a wide variety of vehicle makes and models

Finish: Natural

Location: Rear

Series: Magnaflow 99000 Heavy Metal

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Sold individually

Warranty: Lifetime Magnaflow limited warranty

Part #: M6699204HM

MAGNAFLOW 99000 SERIES HEAVY METAL SPUN CATALYTIC CONVERTER

This series of Magnaflow catalytic converter is loaded with heavy metal catalyst. It has larger catalyst volume and greater concentrations of catalytically active materials. Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond.

Specifications

• 6,375 lbs. GVW
• Round body
• 9 in. L x 5.13 in. W, 13 in. overall length
• 2 in. inlet diameter
• 2 in. outlet diameter
• Single inlet and outlet configuration

Notes

• 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
• May require additional welding for optimal installation
• One unit may cover a wide variety of vehicle makes and models

Finish: Natural

Location: Driver Or Passenger Side

Series: Magnaflow 99000 Heavy Metal

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Sold individually

Warranty: Lifetime Magnaflow limited warranty

Part #: M6699204HM

MAGNAFLOW 99000 SERIES HEAVY METAL SPUN CATALYTIC CONVERTER

This series of Magnaflow catalytic converter is loaded with heavy metal catalyst. It has larger catalyst volume and greater concentrations of catalytically active materials. Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond.

Specifications

• 6,375 lbs. GVW
• Round body
• 9 in. L x 5.13 in. W, 13 in. overall length
• 2 in. inlet diameter
• 2 in. outlet diameter
• Single inlet and outlet configuration

Notes

• 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
• May require additional welding for optimal installation
• One unit may cover a wide variety of vehicle makes and models

Finish: Natural

Series: Magnaflow 99000 Heavy Metal

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Sold individually

Warranty: Lifetime Magnaflow limited warranty

Part #: M6699204HM

MAGNAFLOW 36000 PC-1 SERIES CATALYTIC CONVERTER

This OEM grade CatSMART catalytic converter is ideal for use on passenger cars with only one catalytic converter per exhaust bank. Magnaflow's CatSMART engineering eliminates false fail catalyst-related diagnostic codes by addressing specific oxygen storage capacity needs. Developed to meet even the most stringent tail pipe emissions and made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond. Above all, it has an optimized PGM loading and wash coat formulation that addresses the needs of today's computer controlled On-Board Diagnostic-equipped vehicles.

Specifications

• 3-way catalyst style
• Oval body
• One unit may cover a wide variety of vehicle makes and models
• 12 in. L x 6.5 in. W, 16 in. overall length
• 2.25 in. inlet diameter
• 2.25 in. outlet diameter
• Single inlet and outlet configuration

Notes

• Direct fit catalytic converter legal for sale in California under Executive Order (EO) number D-193-86. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
• May require additional welding for optimal installation

Finish: Natural

Series: Magnaflow 36000 PC-1

Type: Minor modifications required, 50-state legal

Quantity Sold: Sold individually

Warranty: Lifetime Magnaflow limited warranty

Part #: M6636005

MAGNAFLOW 36000 PC-1 SERIES CATALYTIC CONVERTER

This OEM grade CatSMART catalytic converter is ideal for use on passenger cars with only one catalytic converter per exhaust bank. Magnaflow's CatSMART engineering eliminates false fail catalyst-related diagnostic codes by addressing specific oxygen storage capacity needs. Developed to meet even the most stringent tail pipe emissions and made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond. Above all, it has an optimized PGM loading and wash coat formulation that addresses the needs of today's computer controlled On-Board Diagnostic-equipped vehicles.

Specifications

• 3-way catalyst style
• Oval body
• One unit may cover a wide variety of vehicle makes and models
• 12 in. L x 6.5 in. W, 16 in. overall length
• 2.25 in. inlet diameter
• 2.25 in. outlet diameter
• Single inlet and outlet configuration

Notes

• Direct fit catalytic converter legal for sale in California under Executive Order (EO) number D-193-86. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
• May require additional welding for optimal installation

Finish: Natural

Location: Passenger Side

Series: Magnaflow 36000 PC-1

Type: Minor modifications required, 50-state legal

Quantity Sold: Sold individually

Warranty: Lifetime Magnaflow limited warranty

Part #: M6636005

MAGNAFLOW 36000 PC-1 SERIES CATALYTIC CONVERTER

This OEM grade CatSMART catalytic converter is ideal for use on passenger cars with only one catalytic converter per exhaust bank. Magnaflow's CatSMART engineering eliminates false fail catalyst-related diagnostic codes by addressing specific oxygen storage capacity needs. Developed to meet even the most stringent tail pipe emissions and made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond. Above all, it has an optimized PGM loading and wash coat formulation that addresses the needs of today's computer controlled On-Board Diagnostic-equipped vehicles.

Specifications

• 3-way catalyst style
• Oval body
• One unit may cover a wide variety of vehicle makes and models
• 12 in. L x 6.5 in. W, 16 in. overall length
• 2.25 in. inlet diameter
• 2.25 in. outlet diameter
• Single inlet and outlet configuration

Notes

• Direct fit catalytic converter legal for sale in California under Executive Order (EO) number D-193-86. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
• May require additional welding for optimal installation

Finish: Natural

Location: Driver Or Passenger Side

Series: Magnaflow 36000 PC-1

Type: Minor modifications required, 50-state legal

Quantity Sold: Sold individually

Warranty: Lifetime Magnaflow limited warranty

Part #: M6636005

MAGNAFLOW 36000 PC-1 SERIES CATALYTIC CONVERTER

This OEM grade CatSMART catalytic converter is ideal for use on passenger cars with only one catalytic converter per exhaust bank. Magnaflow's CatSMART engineering eliminates false fail catalyst-related diagnostic codes by addressing specific oxygen storage capacity needs. Developed to meet even the most stringent tail pipe emissions and made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond. Above all, it has an optimized PGM loading and wash coat formulation that addresses the needs of today's computer controlled On-Board Diagnostic-equipped vehicles.

Specifications

• 3-way catalyst style
• Oval body
• One unit may cover a wide variety of vehicle makes and models
• 12 in. L x 6.5 in. W, 16 in. overall length
• 2 in. inlet diameter
• 2 in. outlet diameter
• Single inlet and outlet configuration

Notes

• Direct fit catalytic converter legal for sale in California under Executive Order (EO) number D-193-86. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
• May require additional welding for optimal installation

Finish: Natural

Location: Driver And Passenger Side

Series: Magnaflow 36000 PC-1

Type: Minor modifications required, 50-state legal

Quantity Sold: Sold individually

Warranty: Lifetime Magnaflow limited warranty

Part #: M6636004