Volkswagen Mann Cold Air Intake Information

AFE MAGNUM FORCE STAGE 1 XP COLD AIR INTAKE SYSTEM -- 50-state legal; XL canister; Provides additional power up to 21 h.p. and 36 lb.-ft. at 5300 RPM torque; Increases airflow up to 50 percent; Includes Pro Guard 7 air filter that is made of patented seven layers of media that consists of five layers of cotton gauze and two layers of random porosity, 3-angle velocity stack adapter, adjustable ram-scoop, durable cover that allows great seal against all conditions, and dzus fasteners for easy filter access; Universal off-road canister; Replaces OE air filter with a revolutionary Pro-Dry S filter that provides maximum protection against extreme dirt and dust conditions; Delivers aggressive performance sound; Trim sealed or covered to seal out hot engine air; Features washable and reusable filter that comes with the industry's deepest pleats for greater flow and dust holding capacity; Pre-positioned opening for stock attachments to avoid dangling wires and relocating of hoses or tubes; For use in off-road applications.

Series: AFE Magnum force stage 1 XP

Type: Minor modifications required, 50-state legal

Quantity Sold: Assembly

Warranty: 2-year AFE limited warranty

Part #: A157511061

AEM COLD AIR INDUCTION SYSTEM

AEM's Cold Air Induction System is engineered to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.

Specifications

• Synthetic filter material
• Dry filter element
• Without heat shield
• Red tube finish
• T-6063 aluminum tube material

Features

• Up to 99.52% filtration efficiency
• Mandrel-bent tubing
• Washable and reusable air filter
• Manufactured and assembled in the U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-670. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime AEM limited warranty

Part #: A1821490R

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AL

AEM COLD AIR INDUCTION SYSTEM -- Up to 99.52 percent filtration efficiency; Includes blue intake tube, gray synthetic air filter, and a complete mounting kit with comprehensive installation instructions for a perfect fit; Engineered to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment; Features Dryflow Synthetic Air Filter that is proven to be highly efficient in fine dust testing, filtering dirt as small as one micron; Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability; Manufactured and assembled in the USA. Product legal for sale in California under Executive Order (EO) number D-392-24. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime AEM limited warranty

Part #: A1821493B

K&N APOLLO CIS COLD AIR INTAKE

K&N Apollo CIS Universal cold air intake features Apollo's shell that reduces heat build-up and feeds cold air into your engine. Its vent adapters allow reuse of stock sensors originally installed in factory air box.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, intake shell, blanking plug, adapter included
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• Requires K&N silicone adaptor part number 85-6003 to connect 60 mm diameter stock intake hose to air filter's neck flange or 85-6001 to connect 80 mm diameter stock intake hose to air filter's neck flange
• 70 mm diameter stock intake hose can be used to connect to Apollo intake shell

Series: K&N Apollo CIS

Type: Minor modifications required, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33RC5052AS

49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Cast Finish, Use OE Gasket Part number GM10159409 For Manifold Gasket

Material: Aluminum

Type: Direct OE replacement

Quantity Sold: Sold individually

Part #: E113706

AFE MAGNUM FORCE STAGE 1 COLD AIR INTAKE SYSTEM

AFE's Magnum Force Stage 1 cold air intake system features a bold and simple construction that provides maximum horsepower, torque, superior air flow and better acceleration power. It has pre-positioned opening for stock attachments to avoid dangling wires and relocating of hoses or tubes.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Black tube finish
• Plastic tube material

Features

• Provides power up to 25 h.p.
• Up to 550 CFM
• Up to 98.60% filtration efficiency
• Washable and reusable air filter

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
• No drilling and cutting required

Series: AFE Magnum force stage 1

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: 2-year AFE limited warranty

Part #: A155410821

AFE MAGNUM FORCE STAGE 1 COLD AIR INTAKE SYSTEM -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; Provides additional power up to 8 h.p. and 11 lb.-ft. of torque; Increases airflow up to 50 percent; 99.2 percent filtration efficiency; Includes Pro Dry S air filter that is made of two layers of randomly porous oil-free or dry synthetic fabric and durable 16-gauge powdercoated steel heat shield that seals to the hood; Delivers a throaty performance sound and increases fuel economy; Features a bold and simple construction that provides more airflow, equating to greater power and better acceleration; Its larger, washable, and reusable lifetime filter with 360-degree radial free flowing conical design accelerates and enhances airflow; Replaces the entire stock air box and retains the stock intake tube; No cutting or drilling required; It has pre-positioned opening for stock attachments to avoid dangling wires and relocating of hoses or tubes.

Series: AFE Magnum force stage 1 CX

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Assembly

Part #: A155110821

WEIAND STEALTH SERIES INTAKE MANIFOLD, SATIN FINISH -- Single 4 Barrel Manifold, Non-EGR, Power Band 1500-6700 RPM, Square Bore, High Rise And Dual Plane, Combines The Low-End Throttle Response Of A 180 Degree Design With The Top-End Power Of A Single Plane Manifold, Satin Finish

Material: Aluminum

Type: Direct OE replacement

Quantity Sold: Sold individually

Part #: W208150

K&N 57I SERIES GENERATION I PERFORMANCE INDUCTION KIT

K&N's 57i Series Generation I performance induction kit is designed to increase your vehicle's power and acceleration throughout the RPM range. It features an extra surface area that captures and holds more dirt. It works with OE computer system and replaces your restrictive OE air filter and box. It also features a washable and reusable air filter made of multiple interwoven layers of surgical cotton gauze that is infused or charged with oil for outstanding filtration and airflow.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Black tube finish
• Plastic tube material

Features

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Series: K&N 57i Generation I

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Assembly

Part #: K33570437