OE Aftermarket ACC Cabin Filter Information

HOLLEY STREET AVENGER CARBURETOR, 570 CFM -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 4 Barrel, Provides Great Low End Torque, Acceleration, And Top End Horsepower, Includes Adjustable Vacuum Secondary, On-Vehicle Float Adjustment, Factory Calibrated Electric Choke With Graduated Adjustment Settings, Vacuum Ports For PCV, Spark, Power Brake, Vacuum Accessories, And Vacuum Caps, Use Carburetor Part Number 0-80670 For Engine Using Over 300 hp, With Holley's Limited Lifetime Warranty

Series: Holley Street avenger

Type: Direct OE replacement

Condition: New

Quantity Sold: Sold individually

Warranty: Lifetime Holley limited warranty

Part #: H19080570

EDELBROCK THUNDER AVS SERIES CARBURETOR, CAST FINISH, 650 CFM -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; This Carburetor Is Built For Performance And Quality, Designed And Calibrated For Optimum Street Performance In Small-Block And Some Big-Block Engines, Matches With A Variety Of Manifolds That Include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II And Other Brands Of Similar Design, Comes With Primary 0.095 And Secondary 0.098 Metering Jets, 0.068 X 0.047 Metering Rods, And 5 in. HG Orange Step-Up Spring, May Need Carb Stud Kits #8008 Or #8024, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, With Exclusive 12-Month Edelbrock Thunder Series AVS Complete Satisfaction Warranty

Series: Edelbrock Thunder AVS

Type: Direct OE replacement

Condition: New

Quantity Sold: Sold individually

Part #: E111805

DOOR LOCK, CHROME, SET OF 2 -- Keys included; A high quality, OE replacement door lock set; Backed by 1-year, unlimited-mileage warranty.

Finish: Chrome

Type: OE replacement

Quantity Sold: Set of 2

Warranty: 1-year, unlimited-mileage warranty

Part #: REPO507201

FLOWTECH II STANDARD FULL-LENGTH HEADERS, STEEL, CERAMIC COATED, SET OF 2 -- For off road use - Not legal for use on public roads and highways; 1.75 in. tube diameter, 16-gauge tube wall thickness, weld-on collector, 0.38 in. standard head flange; All mounting hardware such as bolts, nuts, and premium gasket are included; 4-1 design; Round head port; These headers are precision-engineered and leak-tested to provide the maximum performance and fuel efficiency of your engine; Formed from specially selected 0.049 cold roll flash controlled tubing with high quality electrostatically-applied satin black paint finish; They feature Flowtech's exclusive, thick, and mandrel-formed power plenum collector; All ports are precisely fitted and finished with sturdy and leaf-proof o-ringed port seals; Must modify stock exhaust to retain catalytic converter.

Finish: Metallic ceramic coated

Material: Steel

Series: Flowtech I

Type: Direct OE replacement

Quantity Sold: Set of 2

Part #: F3131130

EDELBROCK PERFORMER SERIES CARBURETOR, CAST FINISH, NEW -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 600 CFM; 4-barrel; Single fuel inlet; Square bore flange style; Electric choke; For gasoline fuel; Air valve secondary type; Includes both timed and full vacuum ports for ignition advance, primary 0.098 and secondary 0.095 metering jets, metering rods, and 4 Hg orange step-up spring; Designed and calibrated for optimum street performance in small-block and some big-block engines; Matches with a variety of manifolds that include Edelbrock performer, performer EPS, performer RPM, RPM air-gap, Torker II, and other brands of similar design; Use carb stud kits part number 8008 or 8024 if needed.

Series: Edelbrock Performer

Type: Direct OE replacement

Condition: New

Quantity Sold: Sold individually

Warranty: 90-day Edelbrock limited warranty

Part #: E111406

FLOWTECH I STANDARD FULL-LENGTH HEADERS, SATIN BLACK HI-TEMPERATURE PAINTED -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 1.625 in. tube diameter, 16-gauge tube wall thickness, 3 in. weld-on collector, standard head flange; All mounting hardware such as bolts, nuts, and premium gasket are included; Full-length style; Round head port; These headers are precision-engineered and leak-tested to provide the maximum performance and fuel efficiency of your engine; Formed from specially selected 0.060 cold roll flash controlled tubing with high quality electrostatically-applied satin black paint finish; They feature Flowtech's exclusive, thick, and mandrel-formed power plenum collector; All ports are precisely fitted and finished with sturdy and leaf-proof o-ringed port seals; Must modify stock exhaust to retain catalytic converters; Applications with oxygen sensor use reducer part number 10105 for 2.5 in. 3-bolt flange or part number 10110 for 3 in. 3-bolt flange; Must modify lower a-arm support bracket on 79-81 models, pre-70 vehicles with exhaust manifold mounted alternator/generator use bracket part number 10031; Will not fit angle plug heads; Legal only for off-highway or racing use and pre-emission-controlled motor vehicles or engines.

Finish: Black

Material: Steel

Type: Direct OE replacement

Quantity Sold: Set of 2

Warranty: 90-day Flowtech warranty

Part #: F3111100

HOOKER COMPETITION FULL-LENGTH HEADERS, BLACK -- 50-state legal; 1.625 in. x 30 in. primary tube, 16-gauge tube wall thickness, 3 in. collector O.D., 8 in. collector length; All the necessary hardware included for complete installation; Full-length style; SAP shape port; These headers feature tuned-length primary tubes for maximum exhaust scavenging and velocity, 16-gauge mild steel mandrel-bent tubing for smooth exhaust flow, long transition collector for decreased back pressure, and 0.3125 in. machined flanges for a perfect seal; Designed for optimal performance and with the industry's best welds for durability; Available with fittings to accommodate air injection manifold; Exhaust systems can also be fabricated using either Hooker super competition aero chamber mufflers, maximum flow mufflers, super competition turbo mufflers, competition turbo mufflers or header type hooker mufflers; Reducers available with oxygen sensor on 1980 and later models; Will not fit angle plug heads.

Finish: Black

Material: Steel

Series: Hooker Competition

Type: Direct OE replacement

Quantity Sold: Set of 2

Part #: H262451

EDELBROCK PERFORMER SERIES CARBURETOR, CAST FINISH, NEW -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 600 CFM; 4-barrel; Single fuel inlet; Square bore flange style; Manual non-EGR choke; For gasoline fuel; Air valve secondary type; Includes both timed and full vacuum ports for ignition advance, primary 0.100 and secondary 0.095 metering jets, metering rods, and 5 Hg orange step-up spring; Designed and calibrated for optimum street performance in small-block and some big-block engines; Matches with a variety of manifolds that include Edelbrock performer, performer EPS, performer RPM, RPM air-gap, Torker II, and other brands of similar design; Use carb stud kits part number 8008 or 8024 if needed; Electric choke part number 1478 can be added if needed.

Series: Edelbrock Performer

Type: Direct OE replacement

Condition: New

Quantity Sold: Sold individually

Warranty: 90-day Edelbrock limited warranty

Part #: E111405

49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Cast Finish, Use OE Gasket Part number GM10159409 For Manifold Gasket

Material: Aluminum

Type: Direct OE replacement

Quantity Sold: Sold individually

Part #: E113706

MAGNAFLOW PERFORMANCE MUFFLER

Magnaflow's Performance muffler is made of 100 percent stainless steel that is lap-joint welded for solid construction and rugged reliability even in extreme conditions. Features a large diameter, free-flowing, and straight-through perforated stainless steel core that provides smooth and unrestricted flow. Its body is filled with high temperature acoustical suppression material and stainless steel mesh for maximum sound absorption and added durability.

Specifications

• Polished finish
• Oval body
• 18 in. L x 8 in. W x 5 in. H, 24 in. overall length
• 2.5 in. inlet diameter
• 2.25 in. outlet diameter
• Single inlet and dual outlet configuration

Features

• Smooth and deep tone
• Reversible for custom installation

Finish: Polished

Material: Stainless steel

Series: Magnaflow Performance

Type: Direct OE replacement

Tip Shape: Oval

Quantity Sold: Sold individually

Warranty: Lifetime Magnaflow limited warranty

Part #: M6614266