Land Rover OES Genuine Exhaust Hangers Information

MAGNAFLOW CAT-BACK EXHAUST SYSTEM, STAINLESS STEEL, NATURAL FINISH -- 50-state legal; Designed and tested to meet legal sound level limits; Increases horsepower on an average range of 10 percent; 2.5 in. main piping diameter, 2.5 in. tail pipe diameter; Dual rear exit; Single inlet and outlet muffler configuration; Includes 5 in. x 8 in. x 18 in. stainless steel muffler, clamps, pipes, and dual 3 in. polished T-304 stainless steel tips with round shape, angle cut, and rolled edge design; Made of 100 percent tough and durable stainless steel; Dyno tested and proven to provide performance gains in horsepower and torque; Delivers great sound with a smooth and deep tone; Built to last, all welded, and mandrel-bent; Easy weld-on installation.

Finish: Natural

Material: Stainless steel

Series: Magnaflow Performance

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime Magnaflow limited warranty

Part #: M6616888

BORLA UNIVERSAL HOT ROD KIT

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Header-back exhaust system
• Dual rear exit
• 2.5 in. main piping diameter
• 2.5 in. tail pipe diameter
• Two mufflers
• Dual 3 in. polished stainless steel tips with round shape, straight cut, and phantom edge design

Features

• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Polished

Material: Stainless steel

Series: Borla Universal Hot Rod

Type: Universal product, 50-state legal

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2510512

BORLA EXHAUST SYSTEM

Borla exhaust system is made from aircraft-quality, 100 percent T-304 austenitic, and sound-absorbing mandrel-bent tubing that maintains low decibels and protects the vehicle against burnout. Dyno-proven to yield an increase in exhaust flow and power while providing better fuel economy. A combination of pure quality and performance makes this system the world's most winning exhaust.

Specifications

• Cat-back exhaust system
• Single rear exit
• 2 in. main piping diameter
• 2.25 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Single 4 in. polished stainless steel tip with round shape, angle cut, and phantom edge design

Features

• 7 to 15% increase in power
• T-304 stainless steel tubing
• Ultra-smooth mandrel-bent tubing

Notes

• 50-state legal
• Bolt-on attachment style

Finish: Natural

Material: Stainless steel

Series: Borla Performance

Type: Direct fit, 50-state legal

Exit: Rear

Tip Shape: Round

Quantity Sold: Assembly

Warranty: Million-mile Borla warranty

Part #: B2514814

MBRP UNIVERSAL EXHAUST STACK, STAINLESS STEEL, POLISHED, SOLD INDIVIDUALLY -- 5 in. inlet; 5 in. outlet; 36 in. length; Made from T-304 high grade stainless steel; Precision cut for a perfect fit; Fits to 4 in. Smokers exhaust system.

Finish: Polished

Quantity Sold: Sold individually

Warranty: Lifetime MBRP limited warranty

Part #: M79B1555

MAGNAFLOW 91000 SERIES CATALYTIC CONVERTER

This series of Magnaflow catalytic converter is designed for small to medium sized engine displacement where space is limited. Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond.

Specifications

• 3-way catalyst style
• 4,500 lbs. GVW
• Oval body
• One unit may cover a wide variety of vehicle makes and models
• 9 in. L x 6.5 in. W x 4 in. H, 13 in. overall length
• 2 in. inlet diameter
• 2 in. outlet diameter
• Single inlet and outlet configuration

Notes

• 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
• May require additional welding for optimal installation

Finish: Natural

Location: Front, Driver Or Passenger Side

Series: Magnaflow 91000

Type: Minor modifications required, 49-state legal - no CA shipments

Exit: Dual Exhaust

Tip Shape: Oval

Quantity Sold: Sold individually

Warranty: Lifetime Magnaflow limited warranty

Part #: M6691004

MAGNAFLOW 94000 SERIES CATALYTIC CONVERTER

This series of Magnaflow catalytic converter is the most versatile converter from the brand. It is a medium-size converter with a wide range of coverage making it ideal for a wide range of vehicle applications including small, mid-size, and full-size cars, trucks, or sport utility vehicles. Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond.

Specifications

• 3-way catalyst style
• 6,000 lbs. GVW
• Oval body
• One unit may cover a wide variety of vehicle makes and models
• 12 in. L x 6.5 in. W x 4 in. H, 16 in. overall length
• 2 in. inlet diameter
• 2 in. outlet diameter
• Single inlet and outlet configuration

Notes

• 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
• May require additional welding for optimal installation

Finish: Natural

Location: Driver Or Passenger Side

Series: Magnaflow 94000

Type: Minor modifications required, 49-state legal - no CA shipments

Exit: Dual Exhaust

Tip Shape: Oval

Quantity Sold: Sold individually

Warranty: Lifetime Magnaflow limited warranty

Part #: M6694004

MAGNAFLOW 94000 SERIES CATALYTIC CONVERTER

This series of Magnaflow catalytic converter is the most versatile converter from the brand. It is a medium-size converter with a wide range of coverage making it ideal for a wide range of vehicle applications including small, mid-size, and full-size cars, trucks, or sport utility vehicles. Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond.

Specifications

• 3-way catalyst style
• 6,000 lbs. GVW
• Oval body
• One unit may cover a wide variety of vehicle makes and models
• 12 in. L x 6.5 in. W x 4 in. H, 16 in. overall length
• 2 in. inlet diameter
• 2 in. outlet diameter
• Single inlet and outlet configuration

Notes

• 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
• May require additional welding for optimal installation

Finish: Natural

Location: Front, Driver Or Passenger Side

Series: Magnaflow 94000

Type: Minor modifications required, 49-state legal - no CA shipments

Exit: Dual Exhaust

Tip Shape: Oval

Quantity Sold: Sold individually

Warranty: Lifetime Magnaflow limited warranty

Part #: M6694004

BORLA EXHAUST TIPS, STAINLESS STEEL, POLISHED, SET OF 2 -- 2 in. inlet; 3 in. outlet; 12.63 in. length; Round shape; Single style; Angle-cut; Intercooled edge; Made of aircraft-quality and 100 percent polished T-304 austenitic stainless steel; Precision welds and distinctive styling; Weld-on installation.

Finish: Polished

Material: Stainless steel

Type: Universal product

Tip Shape: Round

Quantity Sold: Set of 2

Part #: B2520143

MAGNAFLOW MULTI-BEND EXHAUST PIPE -- 3 Inlet OD, 27.8 Length To Bend, Mandrel-Bent Smooth Transition Tubing For Custom System Fabrication With No Reduction In The Bends, With Manufacturer's Limited Lifetime Warranty

Material: Stainless steel

Type: Universal product

Quantity Sold: Sold individually

Part #: M6610742

DORMAN EXHAUST STUD KIT -- M10-1.25 x 40 mm size; Includes two studs and two nuts; A high quality, OE replacement exhaust stud kit.

Quantity Sold: Kit

Part #: RB03105