Mercury Ready Rad Heater Core Information

ALLISON ROUGH 'N READY BENCH SEAT COVER, SADDLEBACK, BLACK, SOLD INDIVIDUALLY

The most cost effective and convenient way to change the look of your vehicle's interior or to cover up your torn and dirty seats.

Features:

• Made from heavy-duty saddleback fabric
• Covers seats in customized fashion
• Protects original upholstery and hides existing damage

Finish: Black

Material: Fabric

Series: Allison Rough 'N Ready

Quantity Sold: Sold individually

Part #: ALL656889BLK

MSD BLASTER PERFORMANCE COIL, RED -- 0.440 ohms primary resistance, 3.1 K ohms secondary resistance, 48,000 V maximum voltage, 7.0 mH inductance, 300 mA peak current, 250 uS spark duration, 85:1 turns ratio, male/HEI wire attachment style, E-core style, square; Does not include mounting bracket, coil wire, and ballast resistor; Polyurethane internal construction; CARB certified for use in all 50 states; A great new replacement coil with factory style housing; A combination of the blaster coil experience with e-core coil efficiency; Has a unique turns ratio plus lower primary resistance than the stock coil; A bolt-in replacement coil with more voltage output that will work with stock ignition systems as well as MSD equipped cars and trucks.

Quantity Sold: Sold individually

Warranty: 1-year MSD limited warranty

Part #: M468227

A1 CARDONE BOLT-ON READY LOADED BRAKE CALIPER, REMANUFACTURED, SOLD INDIVIDUALLY -- Includes OE style brake pads and all necessary hardware for quick and easy installation; With constrained metal shims that help eliminate noise; 100 percent pressure tested for guaranteed performance; Undergone stringent quality control; Meets or exceeds OE specifications.

Finish: Natural

Location: Front, Passenger Side

Series: A1 Cardone Bolt-On Ready

Type: Loaded, OE replacement

Condition: Remanufactured

Quantity Sold: Sold individually

Part #: A1164083

A1 CARDONE BOLT-ON READY LOADED BRAKE CALIPER, REMANUFACTURED, SOLD INDIVIDUALLY -- Includes OE style brake pads and all necessary hardware for quick and easy installation; With constrained metal shims that help eliminate noise; 100 percent pressure tested for guaranteed performance; Undergone stringent quality control; Meets or exceeds OE specifications.

Finish: Natural

Location: Front, Driver Side

Series: A1 Cardone Bolt-On Ready

Type: Loaded, OE replacement

Condition: Remanufactured

Quantity Sold: Sold individually

Part #: A1164084

GATES DURION HEATER HOSE -- A High Quality Heater Hose, Centerline Length 50 ft., I.D. 0.75

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GAT28412

MSD STREET FIRE TFI IGNITION COIL -- 0.440 ohms primary resistance, 5.5 K ohms secondary resistance, 48,000 V maximum voltage, 7.0 mH inductance, 300 mA peak current, 250 uS spark duration, 85:1 turns ratio, male/HEI wire attachment style, E-core style, square; Does not include mounting bracket, coil wire, and ballast resistor; Epoxy internal construction; Constructed with all new and improved materials and windings for increased spark energy; Features bolt-on performance; Mounts directly in place of factory coils and accepts factory connectors.

Quantity Sold: Sold individually

Warranty: 1-year MSD limited warranty

Part #: M465527

ACCEL SUPER COIL, BLACK/YELLOW, SOLD INDIVIDUALLY -- 0.2 ohm primary resistance, 8.8k ohm secondary resistance, 132:1 turns ratio, 48,000 V maximum voltage, male/HEI wire attachment style, E-core style, epoxy internal construction, square; Does not include mounting bracket, coil wire and ballast resistor; Offers significant peak increases of 37 percent in energy and 23 percent in voltage against OE; Features brass contact that increases energy transfer and resists corrosion better than aluminum; Engineered with optimized low resistance; High turns ratio windings around an m36 high silicone magnetic steel E-core; Delivers quicker starts, improved idle quality, crisper throttle response and higher rpm power; Direct bolt-in, plug-in replacement; Can work with an Accel, Mallory, Crane, Holley or MSD capacitive discharge ignition system; Special high temperature epoxy resists shock and vibration while increasing thermal conductivity.

Quantity Sold: Sold individually

Warranty: 90-day Accel limited warranty

Part #: A35140012

MSD BLASTER SS COIL, RED -- 3.500 in. L x 2.230 in. W x 2.650 in. H, 0.355 ohms primary resistance, 4.4 K ohms secondary resistance, 48,000 V maximum voltage, 6.9 mH inductance, 300 mA peak current, 220 uS spark duration, 70:1 turns ratio, male/HEI wire attachment style, E-core style, square; Includes 3 vibration mounts and hardware, 90 degree MSD spark plug boot and 90 degree dual crimp terminal; Does not include mounting bracket, coil wire, and ballast resistor; CARB E.O. approved; Efficient winding design and assembly creates a compact housing; Improved output coil for electronic ignitions and MSD Ignitions; Primary and secondary windings are encased in Ciba polyurethane; Features DuPont Rynite housing with a tall tower and brass primary terminals.

Type: Universal product

Quantity Sold: Sold individually

Warranty: 1-year MSD limited warranty

Part #: M468207

4 SEASONS HEATER LIQUID LINE -- OE Stock Replacement Heater Liquid Line, Quality Craftsmanship And Durability, Perfect Fit

Quantity Sold: Sold individually

Part #: FS55643

GATES SS HEATER HOSE -- 0.625 in. ID, 60 psi working pressure; Features good resistance to high temperatures and non-oil based coolant additives and moderate resistance to oil and grease contamination; Tested to assure reliability; A high quality, direct fit OE replacement heater hose; Similar to SAE 20R3 class D-2; Do not use for fuel or oil transfer applications.

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GAT28411