Mercury Standard Motor Products Ignition Coil Information

ACCEL SUPERSTOCK BREAKERLESS ELECTRONIC COIL, YELLOW -- For vehicles that have been converted from points to a breakerless electronic distributor; 0.7 ohm primary resistance, 10.8k ohm secondary resistance, 113:1 turns ratio, 45,000 V maximum voltage; Includes high performance tan alkyd tower as well as special crimped and soldered internal connections; An excellent performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system; Offers optimized low resistance, high turns ratio windings, higher energy output, quicker starting, improved throttle response and increased rpm power; With 90-day Accel limited warranty.

Type: Universal product

Quantity Sold: Sold individually

Warranty: 90-day Accel limited warranty

Part #: A358145

MSD BLASTER SS COIL, RED -- 3.500 in. L x 2.230 in. W x 2.650 in. H, 0.355 ohms primary resistance, 4.4 K ohms secondary resistance, 48,000 V maximum voltage, 6.9 mH inductance, 300 mA peak current, 220 uS spark duration, 70:1 turns ratio, male/HEI wire attachment style, E-core style, square; Includes 3 vibration mounts and hardware, 90 degree MSD spark plug boot and 90 degree dual crimp terminal; Does not include mounting bracket, coil wire, and ballast resistor; CARB E.O. approved; Efficient winding design and assembly creates a compact housing; Improved output coil for electronic ignitions and MSD Ignitions; Primary and secondary windings are encased in Ciba polyurethane; Features DuPont Rynite housing with a tall tower and brass primary terminals.

Type: Universal product

Quantity Sold: Sold individually

Warranty: 1-year MSD limited warranty

Part #: M468207

ACCEL SUPERSTOCK BREAKERLESS ELECTRONIC COIL, CHROME -- For vehicles that have been converted from points to a breakerless electronic distributor; 0.7 ohm primary resistance, 10.8k ohm secondary resistance, 113:1 turns ratio, 45,000 V maximum voltage; Includes high performance tan alkyd tower as well as special crimped and soldered internal connections; An excellent performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system; Offers optimized low resistance, high turns ratio windings, higher energy output, quicker starting, improved throttle response and increased rpm power; With 90-day Accel limited warranty.

Type: Universal product

Quantity Sold: Sold individually

Warranty: 90-day Accel limited warranty

Part #: A358145C

ACCEL PRO 25 RACE UNIVERSAL SPARK PLUG WIRE SET, RED -- 8 mm; With 115 degree ford style boot male and female tower caps; Features a ferro-spiral core wound that allows maximum spark energy at only 25 ohms per foot while suppressing the RFI noise; With double-silicone construction rated at over 600 degrees Fahrenheit; Offers a high-gloss red silicone wire jacket that looks great and resists extreme heat, petrochemicals, ozone, and moisture; Allows longer life and better durability; Features high-density silicone insulation; Provides greater dielectric strength, eliminates arcing, all Kevlar stranded inner core and fiberglass braiding that adds greater pull strength and terminal retention; Consists of stainless steel and brass terminals that provide unsurpassed electrical conductivity and excellent corrosion resistance; With 1-year Accel limited warranty.

Series: Accel Pro 25 Race

Type: Universal product

Quantity Sold: Set

Warranty: 1-year Accel limited warranty

Part #: A35257005

TAYLOR CABLE SPIRO-PRO SERIES COIL WIRE KIT, SPIRAL WOUND CORE, BLUE -- 8 mm, 36 in.; Includes all components required for HEI or socket style distributor and coil end installation; With 90-day Taylor Cable limited warranty.

Type: Universal product

Quantity Sold: Kit

Warranty: 90-day Taylor Cable limited warranty

Part #: T6445469

MSD HVC II COIL -- 45,000 Max voltage, 0.016 ohms primary, 30 ohms secondary, 0.250 mH inductance, 70:1 Ratio, 2 amps peak current, 150 uS spark duration; Molded from rynite material housing and bobbin; Tested with an MSD with product number 7530 at plug gap; This coil utilizes an iron U-core design with a segmented bobbin for improved voltage distribution; For use with MSD 7 series ignition; With MSD limited warranty.

Type: Universal product

Quantity Sold: Sold individually

Warranty: 1-year MSD limited warranty

Part #: M468261

ACCEL PRO 25 RACE UNIVERSAL SPARK PLUG WIRE SET, RED -- 8 mm, 90 degrees 0.62 in. hex plug; With male and female tower caps; Features a ferro-spiral core wound that allows maximum spark energy at only 25 ohms per foot while suppressing the RFI noise; With double-silicone construction rated at over 600 degrees Fahrenheit; Offers a high-gloss red silicone wire jacket that looks great and resists extreme heat, petrochemicals, ozone, and moisture; Allows longer life and better durability; Features high-density silicone insulation; Provides greater dielectric strength, eliminates arcing, all Kevlar stranded inner core and fiberglass braiding that adds greater pull strength and terminal retention; Consists of stainless steel and brass terminals that provide unsurpassed electrical conductivity and excellent corrosion resistance; With 1-year Accel limited warranty.

Series: Accel Pro 25 Race

Type: Universal product

Quantity Sold: Set

Warranty: 1-year Accel limited warranty

Part #: A35257041

MSD BLASTER HVC COIL -- 0.2 ohms primary, 1.38k ohms secondary, 42,000 Max voltage, 7 mH inductance, 100:1 Ratio, 300 mA Peak current, 200 us Spark duration; Includes blaster hvc coil, 4 vibration mounts, 2-pin weathertight connector and harness, 2-pin weathertight connector assembly, 2 rings lug terminals, 2 nuts and washers, 2 spade connectors, 4 in. black wire, 2 45 degrees blade terminal and 2 star washers; Tested with an MSD 6al at the plug gap; Designed to produce maximum power with an MSD 6 series ignition control; With MSD limited warranty.

Type: Universal product

Quantity Sold: Sold individually

Warranty: 1-year MSD limited warranty

Part #: M468252

MALLORY STREET PERFORMANCE IGNITION COIL, CHROME -- 1.4 ohms primary resistance, 10K ohms secondary resistance, 58,000 V maximum voltage, 6.6 mH inductance, 180 mA peak current, 300 uS spark duration, 112:1 turns ratio; 12 V coil improves performance of breaker point ignition systems; Features oil-filled design and arc-resistant alkyd top that deliver superior performance, insulation and cooling; Internal design eliminates the need for a separate ballast resistor; Specifically designed to deliver optimum performance when use with Mallory Points Type Distributors; Fits most original equipment coil brackets, or use Mallory super duty coil bracket 29221 or 29244; Not for use with Mallory HYFIRE Electronic Ignition Control or any other high energy, inductive storage or CD ignition system; With 1-year Mallory limited warranty.

Type: Universal product

Quantity Sold: Sold individually

Warranty: 1-year Mallory limited warranty

Part #: M1129217

MALLORY PROMASTER IGNITION COIL -- 0.1 ohms primary resistance, 0.325K ohms secondary resistance, 64,000 V maximum voltage, 0.7 mH inductance, 1500 mA peak current, 300 uS spark duration, 117:1 turns ratio; Provides the fastest rise time and peak spark plug current of any CD coil; Designed for optimum performance when used with Mallory HYFIRE V, VII and X Electronic Ignition Controls or equivalent; Effective to approximately 6500 rpm when used with a HYFIRE VII Ignition Control depending on engine combination; For use with high rpm street cars, drag racing, endurance racing, oval track and road racing applications; 50-state legal; With 1-year Mallory limited warranty.

Type: Universal product

Quantity Sold: Sold individually

Warranty: 1-year Mallory limited warranty

Part #: M1128880