4 SEASONS HEATER SUCTION LINE -- OE Stock Replacement Heater Suction Line, Quality Craftsmanship And Durability, Perfect Fit
Type: Suction
Quantity Sold: Sold individually
Part #: FS56720
MSD REPLACEMENT COIL, 2-PIN CONNECTOR, RED -- 3.962 in. L x 1.757 in. W x 2.968 in. H, 1.2 ohms primary resistance, 13.7 K ohms secondary resistance, 35,000 V maximum voltage, 3.9 mH inductance, 70:1 turns ratio, male/HEI wire attachment style, E-core style, square; Does not include mounting bracket, coil wire, and ballast resistor; Epoxy internal construction; CARB E.O. approved; A direct replacement for late model Dodges; Works with stock ignition as well as MSD ignitions.
Quantity Sold: Sold individually
Warranty: 1-year MSD limited warranty
Part #: M468228
ACCEL HEI REMOTE MOUNT SUPER COIL, BLACK/YELLOW, SOLD INDIVIDUALLY -- 0.3 ohm primary resistance, 8.8k ohm secondary resistance, 134:1 turns ratio, 48,000 V maximum voltage, male/HEI wire attachment style, E-core style, epoxy internal construction, square; Does not include mounting bracket, coil wire and ballast resistor; Offers significant peak increases of 36 percent in energy and 27 percent in voltage against OE; Features brass contact that increases energy transfer and resists corrosion better than aluminum; Engineered with optimized low resistance; High turns ratio windings around an M36 high Silicone magnetic steel E-core; Delivers quicker starts, improved idle quality, crisper throttle response, and higher RPM power; A direct bolt-in, plug-In replacement; Can work with an Accel, Mallory, Crane, Holley or MSD capacitive discharge ignition system; Special high temperature epoxy resists shock and vibration while increasing thermal conductivity.
Quantity Sold: Sold individually
Warranty: 90-day Accel limited warranty
Part #: A35140011
GATES DURION HEATER HOSE -- A High Quality Heater Hose, Centerline Length 50 ft., I.D. 0.75
Quantity Sold: Sold individually
Warranty: Lifetime Gates limited warranty
Part #: GAT28412
MSD BLASTER SS COIL, RED -- 3.500 in. L x 2.230 in. W x 2.650 in. H, 0.355 ohms primary resistance, 4.4 K ohms secondary resistance, 48,000 V maximum voltage, 6.9 mH inductance, 300 mA peak current, 220 uS spark duration, 70:1 turns ratio, male/HEI wire attachment style, E-core style, square; Includes 3 vibration mounts and hardware, 90 degree MSD spark plug boot and 90 degree dual crimp terminal; Does not include mounting bracket, coil wire, and ballast resistor; CARB E.O. approved; Efficient winding design and assembly creates a compact housing; Improved output coil for electronic ignitions and MSD Ignitions; Primary and secondary windings are encased in Ciba polyurethane; Features DuPont Rynite housing with a tall tower and brass primary terminals.
Type: Universal product
Quantity Sold: Sold individually
Warranty: 1-year MSD limited warranty
Part #: M468207
RUGGED RIDGE BACK SEAT HEATER -- 300 watts; Designed to fit on rear wheel well; Requires minimal drilling.
Quantity Sold: Sold individually
Part #: 13150.01
GATES SS HEATER HOSE -- 0.625 in. ID, 60 psi working pressure; Features good resistance to high temperatures and non-oil based coolant additives and moderate resistance to oil and grease contamination; Tested to assure reliability; A high quality, direct fit OE replacement heater hose; Similar to SAE 20R3 class D-2; Do not use for fuel or oil transfer applications.
Quantity Sold: Sold individually
Warranty: Lifetime Gates limited warranty
Part #: GAT28411
SPECTRA HEATER CORE -- 10.63 x 7.13 x 1.63 in. core size, 0.63 in. inlet size, 0.63 in. outlet size; 100 percent leak tested heater core with fully brazed aluminum design available for more than 95 percent of aftermarket demand; Designed for exact fit in the vehicle%X92s original equipment heater casing; Engineered to meet or exceed manufacturer's specifications with original equipment quality at a very competitive price; Carefully packaged for product quality and easy installation; With 1-year Spectra warranty.
Finish: Natural
Quantity Sold: Sold individually
Part #: SPI93022
SPECTRA HEATER CORE -- 10.63 x 7.13 x 1.63 in. core size, 0.63 in. inlet size, 0.63 in. outlet size; 100 percent leak tested heater core with fully brazed aluminum design available for more than 95 percent of aftermarket demand; Designed for exact fit in the vehicle%X92s original equipment heater casing; Engineered to meet or exceed manufacturer's specifications with original equipment quality at a very competitive price; Carefully packaged for product quality and easy installation; With 1-year Spectra warranty.
Finish: Natural
Location: Front
Quantity Sold: Sold individually
Part #: SPI93022
ZEROSTART TANK-TYPE ENGINE HEATER
Quantity Sold: Sold individually
Part #: ZER3308001