Ford Alignment Kit - Select your Model

Position: Front
Eibach Pro Alignment Kit - 1.00 degree (1 kit per wheel) - - 5.81320K - Eibach Camber Kit *(Required: 1 kit per wheel)
- Front Adjustment range: Camber/Caster -1.00 degree to +1.00 degree

Now you can adjust the front camber and caster on the Ford Focus with this upper strut plate. To install, remove the strut assembly, compress the spring and replace the O.E. upper bearing plate with the 81320.

Installation time: 1.0 hr/side

Eibach Pro Alignment Kit Advantage

• DirveWire is an Eibach Distributor with over 200 Alignment Kits in Stock.
• Made for Vehicles That do not have Factory Adjustment.
• Easily Adust Caster and Camber.
• Precision Alignment Kit for Maximum Performance.
• Wider Range of Camber Adjustment.
• Suitable for Street or Track Tuning.

Position: Front
Eibach Pro Alignment Kit - 1.75 degree (12mm PAIR) - 5.81250K - Eibach Camber Kit *(12mm Pairs)
Front - +/- 1.75 degree Adjustment

The Eibach Camber Kit is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degree (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle.

Eibach Pro Alignment Kit Advantage

• DirveWire is an Eibach Distributor with over 200 Alignment Kits in Stock.
• Made for Vehicles That do not have Factory Adjustment.
• Easily Adust Caster and Camber.
• Precision Alignment Kit for Maximum Performance.
• Wider Range of Camber Adjustment.
• Suitable for Street or Track Tuning.

Position: Front
Eibach Pro Alignment Kit - 1.75 degree (12mm PAIR) - 5.81250K - Eibach Camber Kit *(12mm Pairs)
Front - +/- 1.75 degree Adjustment

The Eibach Camber Kit is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degree (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle.

Eibach Pro Alignment Kit Advantage

• DirveWire is an Eibach Distributor with over 200 Alignment Kits in Stock.
• Made for Vehicles That do not have Factory Adjustment.
• Easily Adust Caster and Camber.
• Precision Alignment Kit for Maximum Performance.
• Wider Range of Camber Adjustment.
• Suitable for Street or Track Tuning.

Position: Front
Eibach Pro Alignment Kit - 1.00 degree (1 kit per wheel) - - 5.81320K - Eibach Camber Kit *(Required: 1 kit per wheel)
- Front Adjustment range: Camber/Caster -1.00 degree to +1.00 degree

Now you can adjust the front camber and caster on the Ford Focus with this upper strut plate. To install, remove the strut assembly, compress the spring and replace the O.E. upper bearing plate with the 81320.

Installation time: 1.0 hr/side

Eibach Pro Alignment Kit Advantage

• DirveWire is an Eibach Distributor with over 200 Alignment Kits in Stock.
• Made for Vehicles That do not have Factory Adjustment.
• Easily Adust Caster and Camber.
• Precision Alignment Kit for Maximum Performance.
• Wider Range of Camber Adjustment.
• Suitable for Street or Track Tuning.

Position: Front
Eibach Pro Alignment Kit - 1.75 degree (12mm PAIR) - 5.81250K - Eibach Camber Kit *(12mm Pairs)
Front - +/- 1.75 degree Adjustment

The Eibach Camber Kit is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degree (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle.

Eibach Pro Alignment Kit Advantage

• DirveWire is an Eibach Distributor with over 200 Alignment Kits in Stock.
• Made for Vehicles That do not have Factory Adjustment.
• Easily Adust Caster and Camber.
• Precision Alignment Kit for Maximum Performance.
• Wider Range of Camber Adjustment.
• Suitable for Street or Track Tuning.

Position: Front
Eibach Pro Alignment Kit - 1.75 degree (12mm PAIR) - 5.81250K - Eibach Camber Kit *(12mm Pairs)
Front - +/- 1.75 degree Adjustment

The Eibach Camber Kit is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degree (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle.

Eibach Pro Alignment Kit Advantage

• DirveWire is an Eibach Distributor with over 200 Alignment Kits in Stock.
• Made for Vehicles That do not have Factory Adjustment.
• Easily Adust Caster and Camber.
• Precision Alignment Kit for Maximum Performance.
• Wider Range of Camber Adjustment.
• Suitable for Street or Track Tuning.

Position: Front
Eibach Pro Alignment Kit - 1.75 degree (12mm PAIR) - 5.81250K - Eibach Camber Kit *(12mm Pairs)
Front - +/- 1.75 degree Adjustment

The Eibach Camber Kit is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degree (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle.

Eibach Pro Alignment Kit Advantage

• DirveWire is an Eibach Distributor with over 200 Alignment Kits in Stock.
• Made for Vehicles That do not have Factory Adjustment.
• Easily Adust Caster and Camber.
• Precision Alignment Kit for Maximum Performance.
• Wider Range of Camber Adjustment.
• Suitable for Street or Track Tuning.

Position: Front
Eibach Pro Alignment Kit - 1.75 degree (12mm PAIR) - 5.81250K - Eibach Camber Kit *(12mm Pairs)
Front - +/- 1.75 degree Adjustment

The Eibach Camber Kit is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degree (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle.

Eibach Pro Alignment Kit Advantage

• DirveWire is an Eibach Distributor with over 200 Alignment Kits in Stock.
• Made for Vehicles That do not have Factory Adjustment.
• Easily Adust Caster and Camber.
• Precision Alignment Kit for Maximum Performance.
• Wider Range of Camber Adjustment.
• Suitable for Street or Track Tuning.

Position: Front
Eibach Pro Alignment Kit - 1.00 degree (1 kit per wheel) - - 5.81320K - Eibach Camber Kit *(Required: 1 kit per wheel)
- Front Adjustment range: Camber/Caster -1.00 degree to +1.00 degree

Now you can adjust the front camber and caster on the Ford Focus with this upper strut plate. To install, remove the strut assembly, compress the spring and replace the O.E. upper bearing plate with the 81320.

Installation time: 1.0 hr/side

Eibach Pro Alignment Kit Advantage

• DirveWire is an Eibach Distributor with over 200 Alignment Kits in Stock.
• Made for Vehicles That do not have Factory Adjustment.
• Easily Adust Caster and Camber.
• Precision Alignment Kit for Maximum Performance.
• Wider Range of Camber Adjustment.
• Suitable for Street or Track Tuning.

Position: Front
Eibach Pro Alignment Kit - 1.75 degree (12mm PAIR) - 5.81250K - Eibach Camber Kit *(12mm Pairs)
Front - +/- 1.75 degree Adjustment

The Eibach Camber Kit is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degree (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle.

Eibach Pro Alignment Kit Advantage

• DirveWire is an Eibach Distributor with over 200 Alignment Kits in Stock.
• Made for Vehicles That do not have Factory Adjustment.
• Easily Adust Caster and Camber.
• Precision Alignment Kit for Maximum Performance.
• Wider Range of Camber Adjustment.
• Suitable for Street or Track Tuning.

Position: Front
Eibach Pro Alignment Kit - 1.75 degree (12mm PAIR) - 5.81250K - Eibach Camber Kit *(12mm Pairs)
Front - +/- 1.75 degree Adjustment

The Eibach Camber Kit is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degree (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle.

Eibach Pro Alignment Kit Advantage

• DirveWire is an Eibach Distributor with over 200 Alignment Kits in Stock.
• Made for Vehicles That do not have Factory Adjustment.
• Easily Adust Caster and Camber.
• Precision Alignment Kit for Maximum Performance.
• Wider Range of Camber Adjustment.
• Suitable for Street or Track Tuning.

Position: Front
Eibach Pro Alignment Kit - 1.00 degree (1 kit per wheel) - - 5.81320K - Eibach Camber Kit *(Required: 1 kit per wheel)
- Front Adjustment range: Camber/Caster -1.00 degree to +1.00 degree

Now you can adjust the front camber and caster on the Ford Focus with this upper strut plate. To install, remove the strut assembly, compress the spring and replace the O.E. upper bearing plate with the 81320.

Installation time: 1.0 hr/side

Eibach Pro Alignment Kit Advantage

• DirveWire is an Eibach Distributor with over 200 Alignment Kits in Stock.
• Made for Vehicles That do not have Factory Adjustment.
• Easily Adust Caster and Camber.
• Precision Alignment Kit for Maximum Performance.
• Wider Range of Camber Adjustment.
• Suitable for Street or Track Tuning.

Position: Front
Eibach Pro Alignment Kit - 1.75 degree (12mm PAIR) - 5.81250K - Eibach Camber Kit *(12mm Pairs)
Front - +/- 1.75 degree Adjustment

The Eibach Camber Kit is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degree (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle.

Eibach Pro Alignment Kit Advantage

• DirveWire is an Eibach Distributor with over 200 Alignment Kits in Stock.
• Made for Vehicles That do not have Factory Adjustment.
• Easily Adust Caster and Camber.
• Precision Alignment Kit for Maximum Performance.
• Wider Range of Camber Adjustment.
• Suitable for Street or Track Tuning.

Position: Front
Eibach Pro Alignment Kit - 1.75 degree (12mm PAIR) - 5.81250K - Eibach Camber Kit *(12mm Pairs)
Front - +/- 1.75 degree Adjustment

The Eibach Camber Kit is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degree (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle.

Eibach Pro Alignment Kit Advantage

• DirveWire is an Eibach Distributor with over 200 Alignment Kits in Stock.
• Made for Vehicles That do not have Factory Adjustment.
• Easily Adust Caster and Camber.
• Precision Alignment Kit for Maximum Performance.
• Wider Range of Camber Adjustment.
• Suitable for Street or Track Tuning.

Position: Front
Eibach Pro Alignment Kit - 1.75 degree (12mm PAIR) - 5.81250K - Eibach Camber Kit *(12mm Pairs)
Front - +/- 1.75 degree Adjustment

The Eibach Camber Kit is designed for non-slotted struts. It allows both positive and negative camber changes up to approximately 1.75 degree (depending on vehicle) by replacing the upper O.E. strut/spindle bolt. This easy to use adjuster provides built-in adjustment over the life of a vehicle just by rotating the head of the bolt. Each kit contains two cam bolt assemblies, enough for both sides of the vehicle.

Eibach Pro Alignment Kit Advantage

• DirveWire is an Eibach Distributor with over 200 Alignment Kits in Stock.
• Made for Vehicles That do not have Factory Adjustment.
• Easily Adust Caster and Camber.
• Precision Alignment Kit for Maximum Performance.
• Wider Range of Camber Adjustment.
• Suitable for Street or Track Tuning.