Acura Short Air Intake - Select your Model

Designed to increase horsepower and acceleration. Engineered to specific vehicle. Replaces restrictive factory air filter housing with K&N high flow element and necessary components. Works with O.E. computer and emission control systems. C.A.R.B. Exempt. Maximizes performance while adding value with the washable and reusable K&N high flow FILTERCHARGER element. All K&N Filters are designed to meet a filtration efficiency of 97-98% while achiving maximum airflow.

AEM Short Ram Induction System (Polished) - AEM Short Ram Induction System - 22-416P
- Polished Finish
- Non-Type S

---

AEM Short Ram Air Induction Systems

AEM Short Ram intake systems are an economical alternative to the Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. The AEM Short Ram intakes install easily under the hood and cost less than a typical Cold Air Intake..

During the development process, AEM found certain applications respond favorably to shorter inlet lengths over longer Cold Air designs. For these applications, AEM offers a Short Ram system only and does not offer a Cold Air Intake System. AEM performs extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible.

---

The AEM Short Ram Air Intake Advantage

• Engineered to produce significant increases in power
• 50-state legal or pending legality
• Manufactured and assembled in the USA
• AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
  testing, filters dirt as small as one micron, and never needs filter oil!
• Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
• Reinforced TIG-welded brackets and fittings deliver added durability
• Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
• Comprehensive installation instructions, and decals included
• Available powdercoated in red or blue, or with a mirror-polished finish

AEM Short Ram Induction System (Red) - AEM Short Ram Induction System - 22-404R
- Powder Coated Red

---

AEM Short Ram Air Induction Systems

AEM Short Ram intake systems are an economical alternative to the Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. The AEM Short Ram intakes install easily under the hood and cost less than a typical Cold Air Intake..

During the development process, AEM found certain applications respond favorably to shorter inlet lengths over longer Cold Air designs. For these applications, AEM offers a Short Ram system only and does not offer a Cold Air Intake System. AEM performs extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible.

---

The AEM Short Ram Air Intake Advantage

• Engineered to produce significant increases in power
• 50-state legal or pending legality
• Manufactured and assembled in the USA
• AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
  testing, filters dirt as small as one micron, and never needs filter oil!
• Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
• Reinforced TIG-welded brackets and fittings deliver added durability
• Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
• Comprehensive installation instructions, and decals included
• Available powdercoated in red or blue, or with a mirror-polished finish

AEM Short Ram Induction System (Blue) - AEM Short Ram Induction System - 22-512B
- Powder Coated Blue

---

AEM Short Ram Air Induction Systems

AEM Short Ram intake systems are an economical alternative to the Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. The AEM Short Ram intakes install easily under the hood and cost less than a typical Cold Air Intake..

During the development process, AEM found certain applications respond favorably to shorter inlet lengths over longer Cold Air designs. For these applications, AEM offers a Short Ram system only and does not offer a Cold Air Intake System. AEM performs extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible.

---

The AEM Short Ram Air Intake Advantage

• Engineered to produce significant increases in power
• 50-state legal or pending legality
• Manufactured and assembled in the USA
• AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
  testing, filters dirt as small as one micron, and never needs filter oil!
• Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
• Reinforced TIG-welded brackets and fittings deliver added durability
• Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
• Comprehensive installation instructions, and decals included
• Available powdercoated in red or blue, or with a mirror-polished finish

AEM Short Ram Induction System (Red) - AEM Short Ram Induction System - 22-403R
- Powder Coated Red

---

AEM Short Ram Air Induction Systems

AEM Short Ram intake systems are an economical alternative to the Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. The AEM Short Ram intakes install easily under the hood and cost less than a typical Cold Air Intake..

During the development process, AEM found certain applications respond favorably to shorter inlet lengths over longer Cold Air designs. For these applications, AEM offers a Short Ram system only and does not offer a Cold Air Intake System. AEM performs extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible.

---

The AEM Short Ram Air Intake Advantage

• Engineered to produce significant increases in power
• 50-state legal or pending legality
• Manufactured and assembled in the USA
• AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
  testing, filters dirt as small as one micron, and never needs filter oil!
• Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
• Reinforced TIG-welded brackets and fittings deliver added durability
• Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
• Comprehensive installation instructions, and decals included
• Available powdercoated in red or blue, or with a mirror-polished finish

Designed to increase horsepower and acceleration. Engineered to specific vehicle. Replaces restrictive factory air filter housing with K&N high flow element and necessary components. Works with O.E. computer and emission control systems. C.A.R.B. Exempt. Maximizes performance while adding value with the washable and reusable K&N high flow FILTERCHARGER element. All K&N Filters are designed to meet a filtration efficiency of 97-98% while achiving maximum airflow.

AEM Short Ram Induction System (Blue) - AEM Short Ram Induction System - 22-506B
- Powder Coated Blue

---

AEM Short Ram Air Induction Systems

AEM Short Ram intake systems are an economical alternative to the Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. The AEM Short Ram intakes install easily under the hood and cost less than a typical Cold Air Intake..

During the development process, AEM found certain applications respond favorably to shorter inlet lengths over longer Cold Air designs. For these applications, AEM offers a Short Ram system only and does not offer a Cold Air Intake System. AEM performs extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible.

---

The AEM Short Ram Air Intake Advantage

• Engineered to produce significant increases in power
• 50-state legal or pending legality
• Manufactured and assembled in the USA
• AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
  testing, filters dirt as small as one micron, and never needs filter oil!
• Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
• Reinforced TIG-welded brackets and fittings deliver added durability
• Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
• Comprehensive installation instructions, and decals included
• Available powdercoated in red or blue, or with a mirror-polished finish

INJEN IS Intake Systems - Injen Technology - IS Intake System

- Color: Black Powder Coat

- CARB Exempt OEO Number: D-476-4

- Part Number: IS1471BLK

---

Injen IS Intake System
The IS Series is a traditional, underhood intake system that is placed in the stock location of the factory air-box system. Each system is built from 6061, T-6 aluminum alloy to ensure the lightest design possible. Every IS system is certified or pending by the California Air Resource Board and backed by Injen Technology’s limited lifetime warranty.

AEM Short Ram Induction System (Polished) - AEM Short Ram Induction System - 22-403P
- Polished

---

AEM Short Ram Air Induction Systems

AEM Short Ram intake systems are an economical alternative to the Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. The AEM Short Ram intakes install easily under the hood and cost less than a typical Cold Air Intake..

During the development process, AEM found certain applications respond favorably to shorter inlet lengths over longer Cold Air designs. For these applications, AEM offers a Short Ram system only and does not offer a Cold Air Intake System. AEM performs extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible.

---

The AEM Short Ram Air Intake Advantage

• Engineered to produce significant increases in power
• 50-state legal or pending legality
• Manufactured and assembled in the USA
• AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
  testing, filters dirt as small as one micron, and never needs filter oil!
• Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
• Reinforced TIG-welded brackets and fittings deliver added durability
• Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
• Comprehensive installation instructions, and decals included
• Available powdercoated in red or blue, or with a mirror-polished finish

INJEN IS Intake Systems - Injen Technology - IS Intake System

(non-TCS equipped vehicles)

- Color: Black Powder Coat

- CARB Exempt OEO Number: PENDING

- Part Number: IS1401BLK

---

Injen IS Intake System
The IS Series is a traditional, underhood intake system that is placed in the stock location of the factory air-box system. Each system is built from 6061, T-6 aluminum alloy to ensure the lightest design possible. Every IS system is certified or pending by the California Air Resource Board and backed by Injen Technology’s limited lifetime warranty.

AEM Short Ram Induction System (Blue) - AEM Short Ram Induction System - 22-404B
- Powder Coated Blue

---

AEM Short Ram Air Induction Systems

AEM Short Ram intake systems are an economical alternative to the Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. The AEM Short Ram intakes install easily under the hood and cost less than a typical Cold Air Intake..

During the development process, AEM found certain applications respond favorably to shorter inlet lengths over longer Cold Air designs. For these applications, AEM offers a Short Ram system only and does not offer a Cold Air Intake System. AEM performs extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible.

---

The AEM Short Ram Air Intake Advantage

• Engineered to produce significant increases in power
• 50-state legal or pending legality
• Manufactured and assembled in the USA
• AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
  testing, filters dirt as small as one micron, and never needs filter oil!
• Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
• Reinforced TIG-welded brackets and fittings deliver added durability
• Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
• Comprehensive installation instructions, and decals included
• Available powdercoated in red or blue, or with a mirror-polished finish

AEM Short Ram Induction System (Blue) - AEM Short Ram Induction System - 22-416B
- Powder Coated Blue Finish
- Non-Type S

---

AEM Short Ram Air Induction Systems

AEM Short Ram intake systems are an economical alternative to the Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. The AEM Short Ram intakes install easily under the hood and cost less than a typical Cold Air Intake..

During the development process, AEM found certain applications respond favorably to shorter inlet lengths over longer Cold Air designs. For these applications, AEM offers a Short Ram system only and does not offer a Cold Air Intake System. AEM performs extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible.

---

The AEM Short Ram Air Intake Advantage

• Engineered to produce significant increases in power
• 50-state legal or pending legality
• Manufactured and assembled in the USA
• AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
  testing, filters dirt as small as one micron, and never needs filter oil!
• Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
• Reinforced TIG-welded brackets and fittings deliver added durability
• Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
• Comprehensive installation instructions, and decals included
• Available powdercoated in red or blue, or with a mirror-polished finish

Designed to increase horsepower and acceleration. Engineered to specific vehicle. Replaces restrictive factory air filter housing with K&N high flow element and necessary components. Works with O.E. computer and emission control systems. C.A.R.B. Exempt. Maximizes performance while adding value with the washable and reusable K&N high flow FILTERCHARGER element. All K&N Filters are designed to meet a filtration efficiency of 97-98% while achiving maximum airflow.

AEM Short Ram Induction System (Red) - AEM Short Ram Induction System - 22-403R
- Powder Coated Red

---

AEM Short Ram Air Induction Systems

AEM Short Ram intake systems are an economical alternative to the Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. The AEM Short Ram intakes install easily under the hood and cost less than a typical Cold Air Intake..

During the development process, AEM found certain applications respond favorably to shorter inlet lengths over longer Cold Air designs. For these applications, AEM offers a Short Ram system only and does not offer a Cold Air Intake System. AEM performs extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible.

---

The AEM Short Ram Air Intake Advantage

• Engineered to produce significant increases in power
• 50-state legal or pending legality
• Manufactured and assembled in the USA
• AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
  testing, filters dirt as small as one micron, and never needs filter oil!
• Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
• Reinforced TIG-welded brackets and fittings deliver added durability
• Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
• Comprehensive installation instructions, and decals included
• Available powdercoated in red or blue, or with a mirror-polished finish

AEM Short Ram Induction System (Polished) - AEM Short Ram Induction System - 22-505P
- Polished

---

AEM Short Ram Air Induction Systems

AEM Short Ram intake systems are an economical alternative to the Cold Air systems and deliver performance, value and ease of installation over any other short inlet intake. The AEM Short Ram intakes install easily under the hood and cost less than a typical Cold Air Intake..

During the development process, AEM found certain applications respond favorably to shorter inlet lengths over longer Cold Air designs. For these applications, AEM offers a Short Ram system only and does not offer a Cold Air Intake System. AEM performs extensive temperature testing to locate the filter in the coolest area of the engine compartment, which allows our Short Ram systems to achieve the lowest inlet temperatures possible.

---

The AEM Short Ram Air Intake Advantage

• Engineered to produce significant increases in power
• 50-state legal or pending legality
• Manufactured and assembled in the USA
• AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
  testing, filters dirt as small as one micron, and never needs filter oil!
• Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
• Reinforced TIG-welded brackets and fittings deliver added durability
• Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
• Comprehensive installation instructions, and decals included
• Available powdercoated in red or blue, or with a mirror-polished finish