Thermal Radiator Fan Switch - Select your Make
Thermal Fan Switch Information
Thermal Fan Switch
The thermo radiator fan switch is usually located in the radiator or the engine block and has 2 or 3 wires coming from the unit. The 3 wire switch has a dual sensor for dual speed radiator fans. The thermo fan switches come in the factory temperature settings and also come in cooler thermostatic settings so the fan will come on at a lower coolant temp.
You will need to make sure the vehicle is not hot as when you remove the sensor you will be exposed to the engine coolant. Remember to replace the sensor gasket and top off the coolant after changing the sensor.
Popular Thermal Fan Switch Parts
 | | SKU: FOR.1647975.4312 |
|
|
Fits the following Hyundai Scoupe submodels - 1994 Scoupe LS
- 1994 Scoupe Turbo
|
|
 | | SKU: FAE.1630026.4312 |
|
|
Fits the following Toyota Tercel submodels - 1984 Tercel L4 1.5L Hatchback FWD
- 1984 Tercel Wagon FWD (Production Range Fr:08-00-83)
- 1984 Tercel STD (Production Range To:07-00-84)
|
|
 | | SKU: GGG.1634648.4312 |
|
At Push-in Some Volvo radiators (including some ofthe Nissens radiators offered by WORLDPAC) have changed from a push-in type fan switch to a threaded-type switch. If a threaded-type switch is required use #823 959 481F (92°-87°C), 175 959 481 (94°-90°C), or 251 959 481 (102°-97°C) in place of the original switch and rubber bushing. |
Fits the following Volvo 245 submodels |
|
 | | SKU: OEA.1635975.4312 |
|
Thompson Brazil - 2-Pin - 92-87c Degree (Non-enclosed connections) |
Fits the following Audi 5000 submodels |
|
 | | SKU: FAE.1631705.4312 |
|
|
Fits the following Honda CR-V submodels |
|