Acura CL Brake Pads - Select Year

Position: Rear
Deluxe - - For models w/ ABS. - Nissin Rear Calipers - w/ ABS - w/ Akebono Rear Calipers -

Position: Rear
Deluxe - -

Position: Rear
-

Position: Front
Deluxe - - For California model (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For models made in USA (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For non-California model made in Japan (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For non-California model made in USA (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. -

Position: Rear
- For models w/ ABS. - Nissin Rear Calipers - w/ ABS - w/ Akebono Rear Calipers -

Position: Rear
- w/ ABS - w/ Akebono Rear Calipers -

Position: Front
- For California model (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For models made in USA (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For non-California model made in Japan (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For non-California model made in USA (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. -

Position: Front
-

Position: Front
Deluxe - -

Position: Front
-

Quality: OEM
Position: Rear
Nissin Premium w/ shims - - For models w/ ABS. - Nissin Rear Calipers - w/ ABS - w/ Akebono Rear Calipers -

Quality: OEM
Position: Rear
- For models w/ ABS. - Nissin Rear Calipers - w/ ABS - w/ Akebono Rear Calipers -

Quality: OEM
Position: Rear
Nissin Premium w/ shims - -

Quality: OEM
Position: Rear
- For models w/ ABS. - Nissin Rear Calipers - w/ ABS - w/ Akebono Rear Calipers -

Position: Front
-

Position: Front
Deluxe - -

Quality: OEM
Position: Front
w/o Shims - - For California model (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For models made in USA (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For non-California model made in Japan (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For non-California model made in USA (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. -

Quality: OEM
Position: Front
-

Quality: OEM
Position: Front
Nissin Premium w/ shims - -

Quality: OEM
Position: Front
w/ Shims - -

Quality: OEM
Position: Rear
ACT Ceramic w/ Shims - - For models w/ ABS. - Nissin Rear Calipers - w/ ABS - w/ Akebono Rear Calipers -

Quality: OEM
Position: Front
w/ shims - -

Quality: OEM
Position: Rear
w/ Shims - - For models w/ ABS. - Nissin Rear Calipers - w/ ABS - w/ Akebono Rear Calipers -

Quality: OEM
Position: Front
Nissin Premium w/ shims - -

Quality: OEM
Position: Front
ACT Ceramic w/ Shims - - For California model (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For models made in USA (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For non-California model made in Japan (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For non-California model made in USA (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. -

Quality: OEM
Position: Rear
Pro-ACT Ceramic w/Shims - - For models w/ ABS. - Nissin Rear Calipers - w/ ABS - w/ Akebono Rear Calipers -

Quality: OEM
Position: Front
Nissin Premium w/ shims - - For California model (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For models made in USA (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For non-California model made in Japan (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For non-California model made in USA (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. -

Quality: OEM
Position: Front
Silver Sport w/ shims - -

Quality: OEM
Position: Rear
Pro-ACT Ceramic w/Shims - -

Quality: OEM
Position: Rear
ACT Ceramic w/ Shims - -

Quality: OEM
Position: Front
Silver Sport w/ shims - - For California model (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For models made in USA (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For non-California model made in Japan (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For non-California model made in USA (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. -

Quality: OEM
Position: Front
Pro-ACT Ceramic w/Shims - - For California model (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For models made in USA (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For non-California model made in Japan (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. - For non-California model made in USA (Akebono front calipers). Akebono caliper has one raised ridge on its outer surface; pad length = 138mm (5 7/16"). Akebono caliper lower mounting bolt head requires a 17mm wrench. -

Position: Front
-

Quality: OEM
Position: Front
ACT Ceramic w/ Shims - -

Quality: OEM
Position: Front
Pro-ACT Ceramic w/Shims - -

Quality: OEM
Position: Front
Pro-ACT Ceramic w/Shims - -

Quality: OEM
Position: Front
ACT Ceramic w/ Shims - -