drivewire.com

Acura Integra Cold Air Intake - Select Year

Acura Integra AEM Cold Air Intake
SKU: AEM.21-5004C
Price: $261.80
List Price: $297.50
Quantity:
AEM Hybrid Air Induction System (Silver) - AEM Hybrid Air Induction System - 21-5004C
- Powder Coated Silver Finish
- w/ H22A or F20B

AEM Hybrid Cold Air Induction Systems

AEM Hybrid intakes are direct-fit intakes for Hondas and Acuras with engine swaps, and eliminate the need to buy a system that doesn’t fit and have to cut it up, which voids the warranty. Hybrid intakes install using standard tools with no additional modifications. AEM designed the Hybrid intakes for high-output engines with internal engine modifications like cams and porting, and manufacture them using three-inch mandrel bent aircraft aluminum for maximum flow. Since AEM Designs Hybrid intakes for cars with engine swaps, they are intended for off-road use only and are not 50-state legal.
The AEM Hybrid Cold Air Intake Advantage
  • Direct fit intake for Hondas and Acuras with engine swaps, No modifications required
  • Three-inch aircraft aluminum inlet pipe delivers maximum flow for high-output motors
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil!
  • Manufactured and assembled in the USA
  • Comprehensive installation instructions, decals and license plate frame included
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • Available in a powdercoated titanium-look finish
-
live help
Fits the following Acura Integra submodels
  • 1997 Acura Integra GS L4 1.8L FWD
  • 1998 Acura Integra GS L4 1.8L FWD
  • 1999 Acura Integra GS L4 1.8L FWD
  • 2000 Acura Integra GS L4 1.8L FWD
  • 2001 Acura Integra GS L4 1.8L FWD
  • 1994 Acura Integra GS-R L4 1.8L FWD
  • 1995 Acura Integra GS-R L4 1.8L FWD
  • 1996 Acura Integra GS-R L4 1.8L FWD
  • 1997 Acura Integra GS-R L4 1.8L FWD
  • 1998 Acura Integra GS-R L4 1.8L FWD
  • 1999 Acura Integra GS-R L4 1.8L FWD
  • 2000 Acura Integra GS-R L4 1.8L FWD
  • 2001 Acura Integra GS-R L4 1.8L FWD
  • 1994 Acura Integra LS L4 1.8L FWD
  • 1995 Acura Integra LS L4 1.8L FWD
  • 1996 Acura Integra LS L4 1.8L FWD
  • 1997 Acura Integra LS L4 1.8L FWD
  • 1998 Acura Integra LS L4 1.8L FWD
  • 1999 Acura Integra LS L4 1.8L FWD
  • 2000 Acura Integra LS L4 1.8L FWD
  • 2001 Acura Integra LS L4 1.8L FWD
  • 1994 Acura Integra RS L4 1.8L FWD
  • 1995 Acura Integra RS L4 1.8L FWD
  • 1996 Acura Integra RS L4 1.8L FWD
  • 1997 Acura Integra RS L4 1.8L FWD
  • 1998 Acura Integra RS L4 1.8L FWD
  • 1995 Acura Integra Special Edition L4 1.8L FWD
  • 1996 Acura Integra Special Edition L4 1.8L FWD
  • 1997 Acura Integra Type R L4 1.8L FWD
  • 1998 Acura Integra Type R L4 1.8L FWD
  • 2000 Acura Integra Type R L4 1.8L FWD
  • 2001 Acura Integra Type R L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-403B
Price: $281.52
List Price: $319.91
Quantity:
AEM Cold Air Induction System (Blue) - AEM Cold Air Induction System - 21-403B
- Powder Coated Blue

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1997 Acura Integra GS L4 1.8L FWD
  • 1998 Acura Integra GS L4 1.8L FWD
  • 1999 Acura Integra GS L4 1.8L FWD
  • 2000 Acura Integra GS L4 1.8L FWD
  • 2001 Acura Integra GS L4 1.8L FWD
  • 1994 Acura Integra LS L4 1.8L FWD
  • 1995 Acura Integra LS L4 1.8L FWD
  • 1996 Acura Integra LS L4 1.8L FWD
  • 1997 Acura Integra LS L4 1.8L FWD
  • 1998 Acura Integra LS L4 1.8L FWD
  • 1999 Acura Integra LS L4 1.8L FWD
  • 2000 Acura Integra LS L4 1.8L FWD
  • 2001 Acura Integra LS L4 1.8L FWD
  • 1994 Acura Integra RS L4 1.8L FWD
  • 1995 Acura Integra RS L4 1.8L FWD
  • 1996 Acura Integra RS L4 1.8L FWD
  • 1997 Acura Integra RS L4 1.8L FWD
  • 1998 Acura Integra RS L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-403C
Price: $281.52
List Price: $319.91
Quantity:
AEM Cold Air Induction System (Silver) - AEM Cold Air Induction System - 21-403C
- Powder Coated Silver

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1997 Acura Integra GS L4 1.8L FWD
  • 1998 Acura Integra GS L4 1.8L FWD
  • 1999 Acura Integra GS L4 1.8L FWD
  • 2000 Acura Integra GS L4 1.8L FWD
  • 2001 Acura Integra GS L4 1.8L FWD
  • 1994 Acura Integra LS L4 1.8L FWD
  • 1995 Acura Integra LS L4 1.8L FWD
  • 1996 Acura Integra LS L4 1.8L FWD
  • 1997 Acura Integra LS L4 1.8L FWD
  • 1998 Acura Integra LS L4 1.8L FWD
  • 1999 Acura Integra LS L4 1.8L FWD
  • 2000 Acura Integra LS L4 1.8L FWD
  • 2001 Acura Integra LS L4 1.8L FWD
  • 1994 Acura Integra RS L4 1.8L FWD
  • 1995 Acura Integra RS L4 1.8L FWD
  • 1996 Acura Integra RS L4 1.8L FWD
  • 1997 Acura Integra RS L4 1.8L FWD
  • 1998 Acura Integra RS L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-403P
Price: $281.52
List Price: $319.91
Quantity:
AEM Cold Air Induction System (Polished) - AEM Cold Air Induction System - 21-403P
- Polished

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1997 Acura Integra GS L4 1.8L FWD
  • 1998 Acura Integra GS L4 1.8L FWD
  • 1999 Acura Integra GS L4 1.8L FWD
  • 2000 Acura Integra GS L4 1.8L FWD
  • 2001 Acura Integra GS L4 1.8L FWD
  • 1994 Acura Integra LS L4 1.8L FWD
  • 1995 Acura Integra LS L4 1.8L FWD
  • 1996 Acura Integra LS L4 1.8L FWD
  • 1997 Acura Integra LS L4 1.8L FWD
  • 1998 Acura Integra LS L4 1.8L FWD
  • 1999 Acura Integra LS L4 1.8L FWD
  • 2000 Acura Integra LS L4 1.8L FWD
  • 2001 Acura Integra LS L4 1.8L FWD
  • 1994 Acura Integra RS L4 1.8L FWD
  • 1995 Acura Integra RS L4 1.8L FWD
  • 1996 Acura Integra RS L4 1.8L FWD
  • 1997 Acura Integra RS L4 1.8L FWD
  • 1998 Acura Integra RS L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-403R
Price: $281.52
List Price: $319.91
Quantity:
AEM Cold Air Induction System (Red) - AEM Cold Air Induction System - 21-403R
- Powder Coated Red

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1997 Acura Integra GS L4 1.8L FWD
  • 1998 Acura Integra GS L4 1.8L FWD
  • 1999 Acura Integra GS L4 1.8L FWD
  • 2000 Acura Integra GS L4 1.8L FWD
  • 2001 Acura Integra GS L4 1.8L FWD
  • 1994 Acura Integra LS L4 1.8L FWD
  • 1995 Acura Integra LS L4 1.8L FWD
  • 1996 Acura Integra LS L4 1.8L FWD
  • 1997 Acura Integra LS L4 1.8L FWD
  • 1998 Acura Integra LS L4 1.8L FWD
  • 1999 Acura Integra LS L4 1.8L FWD
  • 2000 Acura Integra LS L4 1.8L FWD
  • 2001 Acura Integra LS L4 1.8L FWD
  • 1994 Acura Integra RS L4 1.8L FWD
  • 1995 Acura Integra RS L4 1.8L FWD
  • 1996 Acura Integra RS L4 1.8L FWD
  • 1997 Acura Integra RS L4 1.8L FWD
  • 1998 Acura Integra RS L4 1.8L FWD
Acura Integra Injen Technology Cold Air Intake
SKU: INJ.RD1400BLK
Price: $290.44
List Price: $315.84
Quantity:
INJEN RD Series Race Division Intake Systems - Injen Technology - RD Series Race Division Intake System

- Color: Black Powder Coat

- CARB Exempt OEO Number: D-476-3

- Part Number: RD1400BLK


Injen RD Series Race Division Intake System
The RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder, denser air. Although most of the RD series is a one-piece design, several are two-piece designs due to the mass air flow meters. Every RD system is certified or pending by the California Air Resource Board and backed by Injen Technologys limited lifetime warranty. -
live help
Fits the following Acura Integra submodels
  • 1990 Acura Integra GS L4 1.8L FWD
  • 1991 Acura Integra GS L4 1.8L FWD
  • 1992 Acura Integra GS L4 1.8L FWD
  • 1993 Acura Integra GS L4 1.8L FWD
  • 1992 Acura Integra GS-R L4 1.7L FWD
  • 1993 Acura Integra GS-R L4 1.7L FWD
  • 1990 Acura Integra LS L4 1.8L FWD
  • 1991 Acura Integra LS L4 1.8L FWD
  • 1992 Acura Integra LS L4 1.8L FWD
  • 1993 Acura Integra LS L4 1.8L FWD
  • 1990 Acura Integra RS L4 1.8L FWD
  • 1991 Acura Integra RS L4 1.8L FWD
  • 1992 Acura Integra RS L4 1.8L FWD
  • 1993 Acura Integra RS L4 1.8L FWD
Acura Integra Injen Technology Cold Air Intake
SKU: INJ.RD1420BLK
Price: $290.44
List Price: $315.84
Quantity:
INJEN RD Series Race Division Intake Systems - Injen Technology - RD Series Race Division Intake System

- Color: Black Powder Coat

- CARB Exempt OEO Number: D-476-3

- Part Number: RD1420BLK


Injen RD Series Race Division Intake System
The RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder, denser air. Although most of the RD series is a one-piece design, several are two-piece designs due to the mass air flow meters. Every RD system is certified or pending by the California Air Resource Board and backed by Injen Technologys limited lifetime warranty. -
live help
Fits the following Acura Integra submodels
  • 1994 Acura Integra LS L4 1.8L FWD
  • 1995 Acura Integra LS L4 1.8L FWD
  • 1996 Acura Integra LS L4 1.8L FWD
  • 1997 Acura Integra LS L4 1.8L FWD
  • 1998 Acura Integra LS L4 1.8L FWD
  • 1999 Acura Integra LS L4 1.8L FWD
  • 2000 Acura Integra LS L4 1.8L FWD
  • 2001 Acura Integra LS L4 1.8L FWD
  • 1994 Acura Integra RS L4 1.8L FWD
  • 1995 Acura Integra RS L4 1.8L FWD
  • 1996 Acura Integra RS L4 1.8L FWD
  • 1997 Acura Integra RS L4 1.8L FWD
  • 1998 Acura Integra RS L4 1.8L FWD
  • 1995 Acura Integra Special Edition L4 1.8L FWD
  • 1996 Acura Integra Special Edition L4 1.8L FWD
Acura Integra Injen Technology Cold Air Intake
SKU: INJ.RD1425BLK
Price: $290.44
List Price: $315.84
Quantity:
INJEN RD Series Race Division Intake Systems - Injen Technology - RD Series Race Division Intake System

- Color: Black Powder Coat

- CARB Exempt OEO Number: D-476-3

- Part Number: RD1425BLK


Injen RD Series Race Division Intake System
The RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder, denser air. Although most of the RD series is a one-piece design, several are two-piece designs due to the mass air flow meters. Every RD system is certified or pending by the California Air Resource Board and backed by Injen Technologys limited lifetime warranty. -
live help
Fits the following Acura Integra submodels
  • 1997 Acura Integra Type R L4 1.8L FWD
  • 1998 Acura Integra Type R L4 1.8L FWD
  • 2000 Acura Integra Type R L4 1.8L FWD
  • 2001 Acura Integra Type R L4 1.8L FWD
Acura Integra Injen Technology Cold Air Intake
SKU: INJ.RD1400P
Price: $290.44
List Price: $315.84
Quantity:
INJEN RD Series Race Division Intake Systems - Injen Technology - RD Series Race Division Intake System

- Color: Polished

- CARB Exempt OEO Number: D-476-3

- Part Number: RD1400P


Injen RD Series Race Division Intake System
The RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder, denser air. Although most of the RD series is a one-piece design, several are two-piece designs due to the mass air flow meters. Every RD system is certified or pending by the California Air Resource Board and backed by Injen Technologys limited lifetime warranty. -
live help
Fits the following Acura Integra submodels
  • 1990 Acura Integra GS L4 1.8L FWD
  • 1991 Acura Integra GS L4 1.8L FWD
  • 1992 Acura Integra GS L4 1.8L FWD
  • 1993 Acura Integra GS L4 1.8L FWD
  • 1992 Acura Integra GS-R L4 1.7L FWD
  • 1993 Acura Integra GS-R L4 1.7L FWD
  • 1990 Acura Integra LS L4 1.8L FWD
  • 1991 Acura Integra LS L4 1.8L FWD
  • 1992 Acura Integra LS L4 1.8L FWD
  • 1993 Acura Integra LS L4 1.8L FWD
  • 1990 Acura Integra RS L4 1.8L FWD
  • 1991 Acura Integra RS L4 1.8L FWD
  • 1992 Acura Integra RS L4 1.8L FWD
  • 1993 Acura Integra RS L4 1.8L FWD
Acura Integra Injen Technology Cold Air Intake
SKU: INJ.RD1420P
Price: $290.44
List Price: $315.84
Quantity:
INJEN RD Series Race Division Intake Systems - Injen Technology - RD Series Race Division Intake System

- Color: Polished

- CARB Exempt OEO Number: D-476-3

- Part Number: RD1420P


Injen RD Series Race Division Intake System
The RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder, denser air. Although most of the RD series is a one-piece design, several are two-piece designs due to the mass air flow meters. Every RD system is certified or pending by the California Air Resource Board and backed by Injen Technologys limited lifetime warranty. -
live help
Fits the following Acura Integra submodels
  • 1994 Acura Integra LS L4 1.8L FWD
  • 1995 Acura Integra LS L4 1.8L FWD
  • 1996 Acura Integra LS L4 1.8L FWD
  • 1997 Acura Integra LS L4 1.8L FWD
  • 1998 Acura Integra LS L4 1.8L FWD
  • 1999 Acura Integra LS L4 1.8L FWD
  • 2000 Acura Integra LS L4 1.8L FWD
  • 2001 Acura Integra LS L4 1.8L FWD
  • 1994 Acura Integra RS L4 1.8L FWD
  • 1995 Acura Integra RS L4 1.8L FWD
  • 1996 Acura Integra RS L4 1.8L FWD
  • 1997 Acura Integra RS L4 1.8L FWD
  • 1998 Acura Integra RS L4 1.8L FWD
  • 1995 Acura Integra Special Edition L4 1.8L FWD
  • 1996 Acura Integra Special Edition L4 1.8L FWD
Acura Integra Injen Technology Cold Air Intake
SKU: INJ.RD1425P
Price: $290.44
List Price: $315.84
Quantity:
INJEN RD Series Race Division Intake Systems - Injen Technology - RD Series Race Division Intake System

- Color: Polished

- CARB Exempt OEO Number: D-476-3

- Part Number: RD1425P


Injen RD Series Race Division Intake System
The RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder, denser air. Although most of the RD series is a one-piece design, several are two-piece designs due to the mass air flow meters. Every RD system is certified or pending by the California Air Resource Board and backed by Injen Technologys limited lifetime warranty. -
live help
Fits the following Acura Integra submodels
  • 1997 Acura Integra Type R L4 1.8L FWD
  • 1998 Acura Integra Type R L4 1.8L FWD
  • 2000 Acura Integra Type R L4 1.8L FWD
  • 2001 Acura Integra Type R L4 1.8L FWD
Acura Integra Injen Technology Cold Air Intake
SKU: INJ.RD1450BLK
Price: $293.93
List Price: $319.20
Quantity:
INJEN RD Series Race Division Intake Systems - Injen Technology - RD Series Race Division Intake System

- Color: Black Powder Coat

- CARB Exempt OEO Number: D-476-3

- Power Gains - HP: +11.9

- Part Number: RD1450BLK


Injen RD Series Race Division Intake System
The RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder, denser air. Although most of the RD series is a one-piece design, several are two-piece designs due to the mass air flow meters. Every RD system is certified or pending by the California Air Resource Board and backed by Injen Technologys limited lifetime warranty. -
live help
Fits the following Acura Integra submodels
  • 1994 Acura Integra GS-R L4 1.8L FWD
  • 1995 Acura Integra GS-R L4 1.8L FWD
  • 1996 Acura Integra GS-R L4 1.8L FWD
  • 1997 Acura Integra GS-R L4 1.8L FWD
  • 1998 Acura Integra GS-R L4 1.8L FWD
  • 1999 Acura Integra GS-R L4 1.8L FWD
  • 2000 Acura Integra GS-R L4 1.8L FWD
  • 2001 Acura Integra GS-R L4 1.8L FWD
Acura Integra Injen Technology Cold Air Intake
SKU: INJ.RD1450P
Price: $293.93
List Price: $319.20
Quantity:
INJEN RD Series Race Division Intake Systems - Injen Technology - RD Series Race Division Intake System

- Color: Polished

- CARB Exempt OEO Number: D-476-3

- Power Gains - HP: +11.9

- Part Number: RD1450P


Injen RD Series Race Division Intake System
The RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder, denser air. Although most of the RD series is a one-piece design, several are two-piece designs due to the mass air flow meters. Every RD system is certified or pending by the California Air Resource Board and backed by Injen Technologys limited lifetime warranty. -
live help
Fits the following Acura Integra submodels
  • 1994 Acura Integra GS-R L4 1.8L FWD
  • 1995 Acura Integra GS-R L4 1.8L FWD
  • 1996 Acura Integra GS-R L4 1.8L FWD
  • 1997 Acura Integra GS-R L4 1.8L FWD
  • 1998 Acura Integra GS-R L4 1.8L FWD
  • 1999 Acura Integra GS-R L4 1.8L FWD
  • 2000 Acura Integra GS-R L4 1.8L FWD
  • 2001 Acura Integra GS-R L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-402B
Price: $302.24
List Price: $343.45
Quantity:
AEM Cold Air Induction System (Blue) - AEM Cold Air Induction System - 21-402B
- Powder Coated Blue

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1990 Acura Integra GS L4 1.8L FWD
  • 1991 Acura Integra GS L4 1.8L FWD
  • 1992 Acura Integra GS L4 1.8L FWD
  • 1993 Acura Integra GS L4 1.8L FWD
  • 1992 Acura Integra GS-R L4 1.7L FWD
  • 1993 Acura Integra GS-R L4 1.7L FWD
  • 1990 Acura Integra LS L4 1.8L FWD
  • 1991 Acura Integra LS L4 1.8L FWD
  • 1992 Acura Integra LS L4 1.8L FWD
  • 1993 Acura Integra LS L4 1.8L FWD
  • 1990 Acura Integra RS L4 1.8L FWD
  • 1991 Acura Integra RS L4 1.8L FWD
  • 1992 Acura Integra RS L4 1.8L FWD
  • 1993 Acura Integra RS L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-402C
Price: $302.24
List Price: $343.45
Quantity:
AEM Cold Air Induction System (Silver) - AEM Cold Air Induction System - 21-402C
- Powder Coated Silver

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1990 Acura Integra GS L4 1.8L FWD
  • 1991 Acura Integra GS L4 1.8L FWD
  • 1992 Acura Integra GS L4 1.8L FWD
  • 1993 Acura Integra GS L4 1.8L FWD
  • 1992 Acura Integra GS-R L4 1.7L FWD
  • 1993 Acura Integra GS-R L4 1.7L FWD
  • 1990 Acura Integra LS L4 1.8L FWD
  • 1991 Acura Integra LS L4 1.8L FWD
  • 1992 Acura Integra LS L4 1.8L FWD
  • 1993 Acura Integra LS L4 1.8L FWD
  • 1990 Acura Integra RS L4 1.8L FWD
  • 1991 Acura Integra RS L4 1.8L FWD
  • 1992 Acura Integra RS L4 1.8L FWD
  • 1993 Acura Integra RS L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-402P
Price: $302.24
List Price: $343.45
Quantity:
AEM Cold Air Induction System (Polished) - AEM Cold Air Induction System - 21-402P
- Polished

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1990 Acura Integra GS L4 1.8L FWD
  • 1991 Acura Integra GS L4 1.8L FWD
  • 1992 Acura Integra GS L4 1.8L FWD
  • 1993 Acura Integra GS L4 1.8L FWD
  • 1992 Acura Integra GS-R L4 1.7L FWD
  • 1993 Acura Integra GS-R L4 1.7L FWD
  • 1990 Acura Integra LS L4 1.8L FWD
  • 1991 Acura Integra LS L4 1.8L FWD
  • 1992 Acura Integra LS L4 1.8L FWD
  • 1993 Acura Integra LS L4 1.8L FWD
  • 1990 Acura Integra RS L4 1.8L FWD
  • 1991 Acura Integra RS L4 1.8L FWD
  • 1992 Acura Integra RS L4 1.8L FWD
  • 1993 Acura Integra RS L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-402R
Price: $302.24
List Price: $343.45
Quantity:
AEM Cold Air Induction System (Red) - AEM Cold Air Induction System - 21-402R
- Powder Coated Red

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1990 Acura Integra GS L4 1.8L FWD
  • 1991 Acura Integra GS L4 1.8L FWD
  • 1992 Acura Integra GS L4 1.8L FWD
  • 1993 Acura Integra GS L4 1.8L FWD
  • 1992 Acura Integra GS-R L4 1.7L FWD
  • 1993 Acura Integra GS-R L4 1.7L FWD
  • 1990 Acura Integra LS L4 1.8L FWD
  • 1991 Acura Integra LS L4 1.8L FWD
  • 1992 Acura Integra LS L4 1.8L FWD
  • 1993 Acura Integra LS L4 1.8L FWD
  • 1990 Acura Integra RS L4 1.8L FWD
  • 1991 Acura Integra RS L4 1.8L FWD
  • 1992 Acura Integra RS L4 1.8L FWD
  • 1993 Acura Integra RS L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-404B
Price: $304.34
List Price: $345.84
Quantity:
AEM Cold Air Induction System (Blue) - AEM Cold Air Induction System - 21-404B
- Powder Coated Blue

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1994 Acura Integra GS-R L4 1.8L FWD
  • 1995 Acura Integra GS-R L4 1.8L FWD
  • 1996 Acura Integra GS-R L4 1.8L FWD
  • 1997 Acura Integra GS-R L4 1.8L FWD
  • 1998 Acura Integra GS-R L4 1.8L FWD
  • 1999 Acura Integra GS-R L4 1.8L FWD
  • 2000 Acura Integra GS-R L4 1.8L FWD
  • 2001 Acura Integra GS-R L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-404C
Price: $304.34
List Price: $345.84
Quantity:
AEM Cold Air Induction System (Silver) - AEM Cold Air Induction System - 21-404C
- Powder Coated Silver

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1994 Acura Integra GS-R L4 1.8L FWD
  • 1995 Acura Integra GS-R L4 1.8L FWD
  • 1996 Acura Integra GS-R L4 1.8L FWD
  • 1997 Acura Integra GS-R L4 1.8L FWD
  • 1998 Acura Integra GS-R L4 1.8L FWD
  • 1999 Acura Integra GS-R L4 1.8L FWD
  • 2000 Acura Integra GS-R L4 1.8L FWD
  • 2001 Acura Integra GS-R L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-404P
Price: $304.34
List Price: $345.84
Quantity:
AEM Cold Air Induction System (Polished) - AEM Cold Air Induction System - 21-404P
- Polished

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1994 Acura Integra GS-R L4 1.8L FWD
  • 1995 Acura Integra GS-R L4 1.8L FWD
  • 1996 Acura Integra GS-R L4 1.8L FWD
  • 1997 Acura Integra GS-R L4 1.8L FWD
  • 1998 Acura Integra GS-R L4 1.8L FWD
  • 1999 Acura Integra GS-R L4 1.8L FWD
  • 2000 Acura Integra GS-R L4 1.8L FWD
  • 2001 Acura Integra GS-R L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-404R
Price: $304.34
List Price: $345.84
Quantity:
AEM Cold Air Induction System (Red) - AEM Cold Air Induction System - 21-404R
- Powder Coated Red

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1994 Acura Integra GS-R L4 1.8L FWD
  • 1995 Acura Integra GS-R L4 1.8L FWD
  • 1996 Acura Integra GS-R L4 1.8L FWD
  • 1997 Acura Integra GS-R L4 1.8L FWD
  • 1998 Acura Integra GS-R L4 1.8L FWD
  • 1999 Acura Integra GS-R L4 1.8L FWD
  • 2000 Acura Integra GS-R L4 1.8L FWD
  • 2001 Acura Integra GS-R L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-412B
Price: $328.78
List Price: $373.61
Quantity:
AEM Cold Air Induction System (Blue) - AEM Cold Air Induction System - 21-412B
- Powder Coated Blue

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1997 Acura Integra Type R L4 1.8L FWD
  • 1998 Acura Integra Type R L4 1.8L FWD
  • 2000 Acura Integra Type R L4 1.8L FWD
  • 2001 Acura Integra Type R L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-412C
Price: $328.78
List Price: $373.61
Quantity:
AEM Cold Air Induction System (Silver) - AEM Cold Air Induction System - 21-412C
- Powder Coated Silver

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1997 Acura Integra Type R L4 1.8L FWD
  • 1998 Acura Integra Type R L4 1.8L FWD
  • 2000 Acura Integra Type R L4 1.8L FWD
  • 2001 Acura Integra Type R L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-412P
Price: $328.78
List Price: $373.61
Quantity:
AEM Cold Air Induction System (Polished) - AEM Cold Air Induction System - 21-412P
- Polished

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1997 Acura Integra Type R L4 1.8L FWD
  • 1998 Acura Integra Type R L4 1.8L FWD
  • 2000 Acura Integra Type R L4 1.8L FWD
  • 2001 Acura Integra Type R L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.21-412R
Price: $328.78
List Price: $373.61
Quantity:
AEM Cold Air Induction System (Red) - AEM Cold Air Induction System - 21-412R
- Powder Coated Red

AEM Cold Air Induction Systems

An AEM Cold Air intake system relocates the air filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But thats only part of the power equation. Tuning the inlet pipe in length and diameter to match the engines resonance helps move more air to the cylinders (think of your engine as a big air pump), and this tuning allows AEM to deliver the maximum power gains throughout the entire RPM range. AEM also monitors fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light.

All AEM Cold Air Intake systems are dyno-proven and tested against the competition with the goal of creating more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction and we are so confident in their fit and performance that we guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding Off Road and Hybrid systems), include a lifetime DryFlow Synthetic air filter and come with a limited lifetime warranty.
The AEM Cold Air Intake Advantage
  • Engineered to produce maximum horsepower and torque
  • Manufactured and assembled in the USA
  • 50-state legal or pending legality
  • Inlet constructed of lightweight 6063 aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil
  • Comprehensive installation instrictions, and decals included
  • Available powdercoated in red, blue or silver, or with a mirror-polished finish
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1997 Acura Integra Type R L4 1.8L FWD
  • 1998 Acura Integra Type R L4 1.8L FWD
  • 2000 Acura Integra Type R L4 1.8L FWD
  • 2001 Acura Integra Type R L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.24-6003C
Price: $365.07
List Price: $414.84
Quantity:
AEM V2 Air Induction System (Titanium) - AEM V2 Air Induction System - 24-6003C
- Powder Coated Titanium Finish
- Manual Transmission Only

AEM V2 Air Induction System

AEM’s V2 intake systems use a patented dual chamber design that maximizes horsepower and torque

The AEM V2 utilizes a dual chamber (using two different diameters and lengths of piping) that creates multiple frequency sound waves to produce the largest area under the curve of any intake system on the market. These sound waves help charge the cylinders with more air throughout the entire rpm range and are what enables the V2 to outperform even AEMs own Cold Air intake systems.

AEM found that inlet length plays a vital role in the power production of V2 systems and not all V2 induction systems relocate the filter outside of the engine compartment. In these cases, AEM performed extensive temperature testing to locate the filter in the coolest area of the engine compartment to achieve the lowest inlet temperatures possible.
The AEM V2 Air Intake Advantage
  • Outperforms every intake system on the market
  • 50-state legal or pending legality
  • AEM Patent #6,959,679
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil!
  • Inlet constructed of lightweight aircraft aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient,
    filters to one micron, and never needs filter oil!
  • Comprehensive installation instructions, and decals included
  • Available in a powdercoated titanium-look finish
  • Manufactured and assembled in the USA
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1997 Acura Integra GS L4 1.8L FWD
  • 1998 Acura Integra GS L4 1.8L FWD
  • 1999 Acura Integra GS L4 1.8L FWD
  • 2000 Acura Integra GS L4 1.8L FWD
  • 2001 Acura Integra GS L4 1.8L FWD
  • 1994 Acura Integra LS L4 1.8L FWD
  • 1995 Acura Integra LS L4 1.8L FWD
  • 1996 Acura Integra LS L4 1.8L FWD
  • 1997 Acura Integra LS L4 1.8L FWD
  • 1998 Acura Integra LS L4 1.8L FWD
  • 1999 Acura Integra LS L4 1.8L FWD
  • 2000 Acura Integra LS L4 1.8L FWD
  • 2001 Acura Integra LS L4 1.8L FWD
  • 1994 Acura Integra RS L4 1.8L FWD
  • 1995 Acura Integra RS L4 1.8L FWD
  • 1996 Acura Integra RS L4 1.8L FWD
  • 1997 Acura Integra RS L4 1.8L FWD
  • 1998 Acura Integra RS L4 1.8L FWD
Acura Integra AEM Cold Air Intake
SKU: AEM.24-6004C
Price: $365.07
List Price: $414.84
Quantity:
AEM V2 Air Induction System (Titanium) - AEM V2 Air Induction System - 24-6004C
- Powder Coated Titanium Finish
- Manual Transmission Only

AEM V2 Air Induction System

AEM’s V2 intake systems use a patented dual chamber design that maximizes horsepower and torque

The AEM V2 utilizes a dual chamber (using two different diameters and lengths of piping) that creates multiple frequency sound waves to produce the largest area under the curve of any intake system on the market. These sound waves help charge the cylinders with more air throughout the entire rpm range and are what enables the V2 to outperform even AEMs own Cold Air intake systems.

AEM found that inlet length plays a vital role in the power production of V2 systems and not all V2 induction systems relocate the filter outside of the engine compartment. In these cases, AEM performed extensive temperature testing to locate the filter in the coolest area of the engine compartment to achieve the lowest inlet temperatures possible.
The AEM V2 Air Intake Advantage
  • Outperforms every intake system on the market
  • 50-state legal or pending legality
  • AEM Patent #6,959,679
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.53% efficient in FINE DUST
    testing, filters dirt as small as one micron, and never needs filter oil!
  • Inlet constructed of lightweight aircraft aluminum and mandrel bent for maximum flow
  • Reinforced TIG-welded brackets and fittings deliver added durability
  • Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
  • AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient,
    filters to one micron, and never needs filter oil!
  • Comprehensive installation instructions, and decals included
  • Available in a powdercoated titanium-look finish
  • Manufactured and assembled in the USA
  • Guaranteed for life
-
live help
Fits the following Acura Integra submodels
  • 1994 Acura Integra GS-R L4 1.8L FWD
  • 1995 Acura Integra GS-R L4 1.8L FWD
  • 1996 Acura Integra GS-R L4 1.8L FWD
  • 1997 Acura Integra GS-R L4 1.8L FWD
  • 1998 Acura Integra GS-R L4 1.8L FWD
  • 1999 Acura Integra GS-R L4 1.8L FWD
  • 2000 Acura Integra GS-R L4 1.8L FWD
  • 2001 Acura Integra GS-R L4 1.8L FWD
shop by vehicle
shop by part