Audi A4 Ignition Coil - Select Year

w/STI Packaging - Ignition Coil Harness/Connector Repair Kit: Failed or Burned Up VW/Audi Coils are Most Commonly Caused By Poor Electrical Connections, Wire Harness Breaks or Fouled Spark Plugs.
Kit Contains: 4) High Temprrature Leads and Terminals All Pre-Assembled in an OE Type Connector. 4) Heat Shrink Butt Connectors. 1) Terminal Extractor Tool.
New Connectors Should be Replaced When replacing Ignition Coils, Especially If There Has Benn More Than One Coil Failure. A Loose Connection (Caused by Engine Vibration, a Cracked Connector Housing, Cracked or Broken Wire Insulation) Can Cause a Voltage Spike Which May Not Only Destrot or Burn Up the Ignition Coil, But Also the neighboring Coil Because the Harness Wires are Bridged Together. The OE Connectors Are Not Designed to be Repeatedly Unplugged and Re-Plugged. VAG Recommends Replacing the Connectors if There is aChance of a Loose Connection. - w/Spark Plug Connector - w/Spark Plug Connector - 1 Per Cylinder Required -

w/STI Packaging - Ignition Coil Harness/Connector Repair Kit: Failed or Burned Up VW/Audi Coils are Most Commonly Caused By Poor Electrical Connections, Wire Harness Breaks or Fouled Spark Plugs.
Kit Contains: 4) High Temprrature Leads and Terminals All Pre-Assembled in an OE Type Connector. 4) Heat Shrink Butt Connectors. 1) Terminal Extractor Tool.
New Connectors Should be Replaced When replacing Ignition Coils, Especially If There Has Benn More Than One Coil Failure. A Loose Connection (Caused by Engine Vibration, a Cracked Connector Housing, Cracked or Broken Wire Insulation) Can Cause a Voltage Spike Which May Not Only Destrot or Burn Up the Ignition Coil, But Also the neighboring Coil Because the Harness Wires are Bridged Together. The OE Connectors Are Not Designed to be Repeatedly Unplugged and Re-Plugged. VAG Recommends Replacing the Connectors if There is aChance of a Loose Connection. - w/Spark Plug Connector - w/Spark Plug Connector - 1 Per Cylinder Required -

w/ Spark Plug Connector - When Replacing Ignition Coils it is Recommended to Closely Examine Wiring Harnes for Cracked or Broken Wires or Loose Connector Contact Which May Cause a Poor Connection Resulting in Intermitten Misfires. -

Quality: OEM
w/ Spark Plug Connector 1 Per Cylinder Required -

w/STI Packaging - w/ Spark Plug Connector -

w/STI-BREMI Boxes - w/ Spark Plug Connector - AWP Engine - w/ Spark Plug Connector - BEA Engine - w/ Spark Plug Connector - When Replacing Ignition Coils it is Recommended to Closely Examine Wiring Harnes for Cracked or Broken Wires or Loose Connector Contact Which May Cause a Poor Connection Resulting in Intermitten Misfires. -

Quality: OEM
1 Per Cylinder - 1 Per Cylinder - 077 905 447A Spark Plug Connector Required -

Double Pack -

Triple Pack -