Ford Focus Cold Air Intake

KOOL VUE 1000 SERIES HIGH-FLOW PERFORMANCE COLD AIR INTAKE SYSTEM -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; Provides additional power up to 7.4 h.p. at 4750 RPM; Up to 99 percent filtration efficiency; Includes premium red air filter, intake tube, heat shield, and all necessary hardware for easy installation; Features polished intake tubing that is made of lightweight T-6061 aluminum; Provides more power throughout the vehicle's full RPM range using mandrel-bent piping and reusable high flowing air filter; Backed by 2-year Kool Vue limited warranty.

Series: Kool Vue 1000

Type: Direct fit, 49-state legal - no CA shipments, with tube

Quantity Sold: Sold individually

Warranty: 2-year Kool Vue limited warranty

Part #: KV4401041K

K&N 57 SERIES GENERATION II FIPK COLD AIR INTAKE SYSTEM

K&N's 57 Series Generation II FIPK (Fuel Injection Performance Kit) cold air intake system is designed to significantly reduce intake restriction as it smoothens and straightens air flow resulting to additional power and torque. It is custom engineered and aerodynamically designed to drive more air into your engine. Its air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Black tube finish
• Plastic tube material

Features

• Provides power up to 11.85 h.p. at 5797 rpm
• Up to 99% filtration efficiency
• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Product legal for sale in California under Executive Order (EO) number D-269-31. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: K&N 57 Generation II

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33572559

AEM COLD AIR INDUCTION SYSTEM

AEM's Cold Air Induction System is engineered to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.

Specifications

• Synthetic filter material
• Dry filter element
• Without heat shield
• Polished tube finish
• T-6063 aluminum tube material

Features

• Mandrel-bent tubing
• Washable and reusable air filter
• Manufactured and assembled in the U.S.A.

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Assembly

Part #: A1821452P

KOOL VUE 1000 SERIES HIGH-FLOW PERFORMANCE COLD AIR INTAKE SYSTEM

This KOOL VUE high-flow performance cold air intake system features polished intake tubing that is made from lightweight T-6061 aluminum and oiled cotton gauze air filter. The exact cold air intake replacement you've been looking for, all necessary hardware included for easy installation!

Features and Benefits:

• Up to 99 percent filtration efficiency
• Provides additional power up to 7.4 h.p. at 4750 RPM
• Provides more power throughout the vehicle's full RPM range using mandrel-bent piping and reusable high flowing air filter

Parts Included:

• Heat shield
• Intake tube
• Premium red air filter
• All necessary hardware for easy installation

Notes: Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states.

Series: Kool Vue 1000

Type: Direct fit, 49-state legal - no CA shipments, with tube

Quantity Sold: Sold individually

Warranty: 2-year Kool Vue limited warranty

Part #: KV4401241K

K&N 69 SERIES TYPHOON COLD AIR INTAKE SYSTEM

K&N's 69 Series Typhoon cold air intake kit is designed to replace your vehicle's restrictive factory air filter and air intake housing. It dramatically reduces intake restriction resulting in additional power and torque. Custom engineered and aerodynamically designed to drive more air into your engine. Its air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Polished tube finish
• T-6063 aluminum tube material

Features

• Provides power up to 8.46 h.p. at 5754 rpm
• Up to 99% filtration efficiency
• Mandrel-bent tubing
• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Series: K&N 69 Typhoon

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33693512TP

AIRAID COLD AIR DAM INTAKE SYSTEM

Airaid's Cold Air Dam intake system is designed to produce optimum performance by isolating engine heat away from air intake. It uses the stock air filter location but gives it a boost with a huge air inlet to keep more cold air flowing. Its heat shield is powdercoated inside and out for maximum air flow and corrosion protection.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Mounting hardware included
• Black tube finish
• Plastic tube material

Features

• Provides power up to 12 to 18 h.p.
• Up to 820 CFM
• Up to 99.99% filtration efficiency
• Washable and reusable air filter
• Made in U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-609-4. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Series: Airaid Cold air dam

Type: Direct fit, 50-state legal

Quantity Sold: Sold individually

Warranty: Lifetime Airaid no-hassle warranty

Part #: A86450234

K&N 57I SERIES GENERATION I PERFORMANCE INDUCTION KIT

K&N's 57i Series Generation I performance induction kit is designed to increase your vehicle's power and acceleration throughout the RPM range. It features an extra surface area that captures and holds more dirt. It works with OE computer system and replaces your restrictive OE air filter and box. It also features a washable and reusable air filter made of multiple interwoven layers of surgical cotton gauze that is infused or charged with oil for outstanding filtration and airflow.

Specifications

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Hose, mounting hardware included
• Black tube finish
• Plastic tube material

Features

• Up to 99% filtration efficiency
• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Series: K&N 57i Generation I

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33570595

AEM COLD AIR INDUCTION SYSTEM

AEM's Cold Air Induction System is engineered to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.

Specifications

• Synthetic filter material
• Dry filter element
• Without heat shield
• Blue tube finish
• T-6063 aluminum tube material

Features

• Mandrel-bent tubing
• Washable and reusable air filter
• Manufactured and assembled in the U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-670. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime AEM limited warranty

Part #: A1821451B

AEM COLD AIR INDUCTION SYSTEM

AEM's Cold Air Induction System is engineered to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.

Specifications

• Synthetic filter material
• Dry filter element
• Without heat shield
• Polished tube finish
• T-6063 aluminum tube material

Features

• Mandrel-bent tubing
• Washable and reusable air filter
• Manufactured and assembled in the U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-670. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime AEM limited warranty

Part #: A1821451P

K&N 69 SERIES TYPHOON COLD AIR INTAKE SYSTEM -- 50-state legal; Provides additional power up to 5.83 h.p. at 5000 RPM; 96 to 99 percent filtration efficiency; Includes textured black intake tube, red air filter, heat shield, and all the necessary hardware for installation; High-flow intake kit for sport compact and sports car; Features T-6063 aluminum intake tube that is custom engineered and aerodynamically designed to drive air into your engine; Its washable and reusable air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow; Comes with a heat shield that is custom designed to isolate and provide cooler air; Virtually eliminates intake tract restriction by replacing the air filter and the entire air path to the engine; Can go up to 100,000 miles between cleanings depending on driving conditions; Easy to install.

Series: K&N 69 Typhoon

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33693516TTK