Honda Civic Cold Air Intake

Injen Technology - SP Intake System

- Color: Polished

- CARB Exempt OEO Number: PENDING

- Power Gains - HP: +11.2 - TQ: +8.2

- Part Number: SP1476P

---

Injen SP Intake System
These Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The SP series does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. SP is The Worlds First Tuned Intake System.

For more information on this product, please call one of our expert sales associates at (800) 895-8910.

Injen Cold Air Intakes. - Injen Cold Air Intakes consist of the RD Series Race Division Intake System and the SP Intake System. The RD series is a cold air intake system for the enthusiast craving mid-range power. The SP Intakes Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. Every RD system is certified or pending by the California Air Resource Board and backed by Injen Technology's limited lifetime warranty.

Injen Technology Ltd.
For over a decade Injen Technology Co. Ltd has played a major roll in the design and development of air intake systems.

IS Intake Systems
The IS Series is a traditional, under hood intake system that is placed in the stock location of the factory air-box system. Each system is built from 6061, T-6 aluminum alloy to ensure the lightest design possible.

RD Series Race Division Intake Systems
The RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder, denser air. Although most of the RD series is a one-piece design, several are two-piece designs due to the mass air flow meters.

SP Series Intake Systems
This unique design was specifically engineered with MR Technology (MegaRam), to provide maximum horsepower gains and take into consideration the air to fuel ratio's set by the Original Equipment Manufacturer. MR Technology is a sophisticated tuning process developed by Injen Technology; altering Cold Air Intake systems to be carefully tuned within Factory Safe limits.

PF Series POWER-FLOW Air Intake Systems
The POWER-FLOW series has Revolutionize air intakes for Truck/SUV and Performance Automotive vehicles. Injen’s MR Technology, intakes are heat resistant Composite POWER BOX with Polished Brushed Aluminum Skin, Cold Air Inducer, Air Stabilizer, Velocity Stack and Stainless Steel Pre-Filters.

EIS Series European Intake Systems
The EIS Series utilizes both cold air and short ram air intake systems designed specifically for International vehicles and the owners demand for high performance products. Each kit is strategically designed to provide maximum horsepower and torque gains

Every Injen Intake system is certified by the California Air Resource Board or submitted with pending approval and backed by Injen Technology is limited lifetime warranty.

Injen Technology - SP Intake System

- Color: Black Powder Coat

- CARB Exempt OEO Number: PENDING

- Power Gains - HP: +11.2 - TQ: +8.2

- Part Number: SP1476BLK

---

Injen SP Intake System
These Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The SP series does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. SP is The Worlds First Tuned Intake System.

For more information on this product, please call one of our expert sales associates at (800) 895-8910.

Injen Cold Air Intakes. - Injen Cold Air Intakes consist of the RD Series Race Division Intake System and the SP Intake System. The RD series is a cold air intake system for the enthusiast craving mid-range power. The SP Intakes Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. Every RD system is certified or pending by the California Air Resource Board and backed by Injen Technology's limited lifetime warranty.

Injen Technology Ltd.
For over a decade Injen Technology Co. Ltd has played a major roll in the design and development of air intake systems.

IS Intake Systems
The IS Series is a traditional, under hood intake system that is placed in the stock location of the factory air-box system. Each system is built from 6061, T-6 aluminum alloy to ensure the lightest design possible.

RD Series Race Division Intake Systems
The RD series is a cold air intake system for the enthusiast craving mid-range power. The intake tube is strategically placed behind the front bumper to acquire colder, denser air. Although most of the RD series is a one-piece design, several are two-piece designs due to the mass air flow meters.

SP Series Intake Systems
This unique design was specifically engineered with MR Technology (MegaRam), to provide maximum horsepower gains and take into consideration the air to fuel ratio's set by the Original Equipment Manufacturer. MR Technology is a sophisticated tuning process developed by Injen Technology; altering Cold Air Intake systems to be carefully tuned within Factory Safe limits.

PF Series POWER-FLOW Air Intake Systems
The POWER-FLOW series has Revolutionize air intakes for Truck/SUV and Performance Automotive vehicles. Injen’s MR Technology, intakes are heat resistant Composite POWER BOX with Polished Brushed Aluminum Skin, Cold Air Inducer, Air Stabilizer, Velocity Stack and Stainless Steel Pre-Filters.

EIS Series European Intake Systems
The EIS Series utilizes both cold air and short ram air intake systems designed specifically for International vehicles and the owners demand for high performance products. Each kit is strategically designed to provide maximum horsepower and torque gains

Every Injen Intake system is certified by the California Air Resource Board or submitted with pending approval and backed by Injen Technology is limited lifetime warranty.

AEM Hybrid Air Induction System - 21-5003C
- Powder Coated Silver Finish
- w/ B18C1

---

AEM Hybrid Cold Air Induction Systems

AEM Hybrid intakes are direct-fit intakes for Hondas and Acuras with engine swaps, and eliminate the need to buy a system that doesn’t fit and have to cut it up, which voids the warranty. Hybrid intakes install using standard tools with no additional modifications. AEM designed the Hybrid intakes for high-output engines with internal engine modifications like cams and porting, and manufacture them using three-inch mandrel bent aircraft aluminum for maximum flow. Since AEM Designs Hybrid intakes for cars with engine swaps, they are intended for off-road use only and are not 50-state legal.

---

The AEM Hybrid Cold Air Intake Advantage

• Direct fit intake for Hondas and Acuras with engine swaps, No modifications required
• Three-inch aircraft aluminum inlet pipe delivers maximum flow for high-output motors
• Reinforced TIG-welded brackets and fittings deliver added durability
• AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient in FINE DUST
  testing, filters dirt as small as one micron, and never needs filter oil!
• Manufactured and assembled in the USA
• Comprehensive installation instructions, decals and license plate frame included
• Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
• Available in a powdercoated titanium-look finish

For more information on this product, please call one of our expert sales associates at (800) 895-8910.

AEM Cold Air Induction Systems - The AEM Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horse power and torque and tuning the inlet pipe length and diameter to match the engine’s resonance helps move more air to the cylinders allowing AEM to deliver the maximum power gains throughout the entire RPM range.

AEM Power - Advanced Engine Management
When enthusiasts buy AEM and BRUTE FORCE performance parts, they are getting the finest engineering, highest quality and best value the industry has to offer. Look no further than AEM products for proof.

---

AEM pioneered the Cold Air Intake for sport compacts, invented the air bypass valve and V2 induction system, created the first hybrid intake systems for cars with engine swaps, created the first stand-alone programmable engine management system that uses a factory wiring harness, and were the first to introduce a gauge with a built-in wideband UEGO controller and gauge readout in one unit!

---

In 2004 AEM acquired the business of DC Sports to combine the best engine breathing solutions from air filter to exhaust tip. In 2006, we proudly introduced the DRYFLOW Synthetic air filter, long tube headers for trucks and SUVs from our BRUTE FORCE division, a laboratory-grade Thermocouple Amplifier, digital gauge displays and the Serial DataStream Gauge from our performance electronics division.

AEM Hybrid Air Induction System - 21-5002C
- Powder Coated Silver Finish
- w/ B18C1

---

AEM Hybrid Cold Air Induction Systems

AEM Hybrid intakes are direct-fit intakes for Hondas and Acuras with engine swaps, and eliminate the need to buy a system that doesn’t fit and have to cut it up, which voids the warranty. Hybrid intakes install using standard tools with no additional modifications. AEM designed the Hybrid intakes for high-output engines with internal engine modifications like cams and porting, and manufacture them using three-inch mandrel bent aircraft aluminum for maximum flow. Since AEM Designs Hybrid intakes for cars with engine swaps, they are intended for off-road use only and are not 50-state legal.

---

The AEM Hybrid Cold Air Intake Advantage

• Direct fit intake for Hondas and Acuras with engine swaps, No modifications required
• Three-inch aircraft aluminum inlet pipe delivers maximum flow for high-output motors
• Reinforced TIG-welded brackets and fittings deliver added durability
• AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient in FINE DUST
  testing, filters dirt as small as one micron, and never needs filter oil!
• Manufactured and assembled in the USA
• Comprehensive installation instructions, decals and license plate frame included
• Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
• Available in a powdercoated titanium-look finish

For more information on this product, please call one of our expert sales associates at (800) 895-8910.

AEM Cold Air Induction Systems - The AEM Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horse power and torque and tuning the inlet pipe length and diameter to match the engine’s resonance helps move more air to the cylinders allowing AEM to deliver the maximum power gains throughout the entire RPM range.

AEM Power - Advanced Engine Management
When enthusiasts buy AEM and BRUTE FORCE performance parts, they are getting the finest engineering, highest quality and best value the industry has to offer. Look no further than AEM products for proof.

---

AEM pioneered the Cold Air Intake for sport compacts, invented the air bypass valve and V2 induction system, created the first hybrid intake systems for cars with engine swaps, created the first stand-alone programmable engine management system that uses a factory wiring harness, and were the first to introduce a gauge with a built-in wideband UEGO controller and gauge readout in one unit!

---

In 2004 AEM acquired the business of DC Sports to combine the best engine breathing solutions from air filter to exhaust tip. In 2006, we proudly introduced the DRYFLOW Synthetic air filter, long tube headers for trucks and SUVs from our BRUTE FORCE division, a laboratory-grade Thermocouple Amplifier, digital gauge displays and the Serial DataStream Gauge from our performance electronics division.

AEM Hybrid Air Induction System - 21-5004C
- Powder Coated Silver Finish
- w/ H22A or F20B

---

AEM Hybrid Cold Air Induction Systems

AEM Hybrid intakes are direct-fit intakes for Hondas and Acuras with engine swaps, and eliminate the need to buy a system that doesn’t fit and have to cut it up, which voids the warranty. Hybrid intakes install using standard tools with no additional modifications. AEM designed the Hybrid intakes for high-output engines with internal engine modifications like cams and porting, and manufacture them using three-inch mandrel bent aircraft aluminum for maximum flow. Since AEM Designs Hybrid intakes for cars with engine swaps, they are intended for off-road use only and are not 50-state legal.

---

The AEM Hybrid Cold Air Intake Advantage

• Direct fit intake for Hondas and Acuras with engine swaps, No modifications required
• Three-inch aircraft aluminum inlet pipe delivers maximum flow for high-output motors
• Reinforced TIG-welded brackets and fittings deliver added durability
• AEM’s lifetime DRYFLOW Synthetic air filter is 99.4% efficient in FINE DUST
  testing, filters dirt as small as one micron, and never needs filter oil!
• Manufactured and assembled in the USA
• Comprehensive installation instructions, decals and license plate frame included
• Utilizes a complete hardware kit with soft mounts for a guaranteed perfect fit
• Available in a powdercoated titanium-look finish

For more information on this product, please call one of our expert sales associates at (800) 895-8910.

AEM Cold Air Induction Systems - The AEM Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horse power and torque and tuning the inlet pipe length and diameter to match the engine’s resonance helps move more air to the cylinders allowing AEM to deliver the maximum power gains throughout the entire RPM range.

AEM Power - Advanced Engine Management
When enthusiasts buy AEM and BRUTE FORCE performance parts, they are getting the finest engineering, highest quality and best value the industry has to offer. Look no further than AEM products for proof.

---

AEM pioneered the Cold Air Intake for sport compacts, invented the air bypass valve and V2 induction system, created the first hybrid intake systems for cars with engine swaps, created the first stand-alone programmable engine management system that uses a factory wiring harness, and were the first to introduce a gauge with a built-in wideband UEGO controller and gauge readout in one unit!

---

In 2004 AEM acquired the business of DC Sports to combine the best engine breathing solutions from air filter to exhaust tip. In 2006, we proudly introduced the DRYFLOW Synthetic air filter, long tube headers for trucks and SUVs from our BRUTE FORCE division, a laboratory-grade Thermocouple Amplifier, digital gauge displays and the Serial DataStream Gauge from our performance electronics division.