Honda Prelude Wiper Blade - Select Year

Direct Connect - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - 3 Door Coupe - D-50 (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - Driver's Side & Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - Fits either right or left side - Fits either right or left side. - Front & Rear - Hatchback - If using Bosch blade 40 717A, adapter 43 000 may also be required (included with Bosch 40 917 blade). Adapter not required with NPW blade 27-217. - If using Bosch blade 40 717A, adaptor 43 000 may also be required (included with Bosch 40 917 blade). Adaptor not required with NPW blade 27-217. - Passenger - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - Twin screw type. - w/o Fin -

Position: Right
Direct Connect - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm Hood clearance must exceed 1 5/8 (42mm) for installation. - 3 Door & 5 Door Hatchback If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - 3 Door Coupe - 3 Door Hatchback - 475mm, 19" - bs063003: NWB changed the clip and adapter contents. No longer a "hook" and "bayonet" clip content. Now changed to a "multiclip." - California - Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm ** Separate connector S9 Required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. California - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Exc. Electronically Adjustable Suspension (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front & Rear - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front Also fits Rear - Front Right - Hatchback - Hatchback If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adapter may also be required (included with Bosch 40 919 blade). Adapter not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - JAPAN MADE MODELS ONLY - Models made in Japan - Models made in USA or Canada - Non-winter blade - NX 2 Door Coupe If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - OE Blade only - Right or Rear This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additioanl cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Passenger Side 475mm - Passenger's Side - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Right - 475mm /19" - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Twin screw type - Twin screw type. - USA MADE MODELS ONLY. ITTA-ESNA - USA MADE MODELS ONLY. Nippon - USA MADE MODELS ONLY. Denso type. - USA MADE MODELS ONLY. Valeo type. -

Direct Connect - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm Hood clearance must exceed 1 5/8 (42mm) for installation. - 3 Door & 5 Door Hatchback If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - 3 Door Coupe - 3 Door Hatchback - 475mm, 19" - bs063003: NWB changed the clip and adapter contents. No longer a "hook" and "bayonet" clip content. Now changed to a "multiclip." - California - Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm ** Separate connector S9 Required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. California - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Exc. Electronically Adjustable Suspension (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front & Rear - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front Also fits Rear - Front Right - Hatchback - Hatchback If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adapter may also be required (included with Bosch 40 919 blade). Adapter not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - JAPAN MADE MODELS ONLY - Models made in Japan - Models made in USA or Canada - Non-winter blade - NX 2 Door Coupe If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - OE Blade only - Right or Rear This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additioanl cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Passenger Side 475mm - Passenger's Side - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Right - 475mm /19" - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Twin screw type - Twin screw type. - USA MADE MODELS ONLY. ITTA-ESNA - USA MADE MODELS ONLY. Nippon - USA MADE MODELS ONLY. Denso type. - USA MADE MODELS ONLY. Valeo type. -

Position: Left
Direct Connect - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed 1 5/8 (42mm) for installation - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed 1 5/8" (42mm) for installation - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed1 5/8 (42mm) for Installation - (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - 22 Inch (550mm) - 22 Inch (550mm) - Aftermarket blades have no provisions for air deflector used on the original blade
Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 22" (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 22" (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - 22" - w/ spoiler - 22" - w/o Spoiler - 550mm - 550mm - 22" - Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's & Rear Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - Driver's Side - 550mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side - Wagon (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Drivers Side 550mm - Early (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Sierra Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Station Wagon (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - If using Bosch blade 40 722A or 40 922, 43 000 adapter may also be required. Adapter not required with NPW blade 27-221. - Micro Edge Excel 16" - Wagon - Drivers' Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Micro Edge Excel 22" (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Non-winter blade - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Pass. w/ 22" Blade (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger Side - Coupe (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger w/ 22" Blade (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Sedan - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - SWF 22"/550mm - w/o Fin - Winter blade -

Position: Left
Direct Connect - - (530mm, 21") - 21" - 22 Inch (550mm) - 22 Inch (550mm) - Aftermarket blades have no provisions for air deflector used on the original blade
Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 530mm - 530mm - 21" - 530mm, 21" - 530mm- 21" - 530mm-21" - 550mm - Convertible Excel+ Blade Length: 21" 530mm - Driver's Side Excel+ Blade Length: 21" 530mm - Drivers Side 550mm - Exc. 1994 Convertible - Excel+ Blade Length: 21" 530mm - Front Right & Left - 530mm-21" - If using Bosch blade 40 721, 43 000 adaptor may also be required (included with Bosch 40 921 blade). Adaptor not required with NPW blade 27-221. - JAPAN MADE MODELS ONLY - L=530mm - Micro Blade - Micro Edge - NWB changed the clip contents. No longer a "hook" clip. Now chang ed to a "multiclip." - Passenger Side Excel+ Blade Length: 21" 530mm - Passenger's Side - Coupe Excel+ Blade Length: 21" 530mm - Right & Left - 530mm-21" - This is a 2-blade kit as sold by the dealer. As the Bosch blades we sell in place of the OE kit are sold individually, be sure to confirm the correct number of blades that the vehicle requires. - This is a 2-blade kit when sold by the dealer. As the Bosch blades we sell in place of this OE kit are sold individually, be sure to confirm the correct number of blades that the vehicle requires. - Twin screw type. - USA MADE MODELS ONLY. ITTA-ESNA - USA MADE MODELS ONLY. Nippon - w/o Fin - Windshield
This is a 2-blade kit as sold by the dealer. As the Bosch blades we sell in place of the OE kit are SOLD INDIVIDUALLY, be sure to confirm the correct number of blades that the vehicle requires. - Wiper Micro Blade -

Position: Left
Direct Connect - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - 20" - 5 Door Hatchback - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side -Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Exc. Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Fastback Hatch - For OE blade only. This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. Some applications may also require trimming of the insert once it has been installed. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - FWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - GSI (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Hatchback - Hook Arm - Pin Arm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Late (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Premium (20") - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper t arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Winter (20") -

Winter Blade - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - 1.8L Engine (EA81) - 3 Door & 5 Door Hatchback - 3 Door Coupe or 5 Door Wagon - 3 Door Hatchback - 3 Door Hatchback & 5 Door Wagon - 400 mm - 5 Door Wagon - D-50 (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - Driver's Side & Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - Exc. Convertible - Front-left or right Also fits Rear, - Front-left or right Also fits Rear, req. 1 Front req. 2 - Hatchback - Hatchback or Wagon - Hatchbacks only - If using Bosch blade 40 717A, adapter 43 000 may also be required (included with Bosch 40 917 blade). Adapter not required with NPW blade 27-217. - If using Bosch blade 40 717A, adaptor 43 000 may also be required (included with Bosch 40 917 blade). Adaptor not required with NPW blade 27-217. - Left or Right for (GL) 3 Door Hatchback - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - Wagon -

Position: Right
Winter Blade - - (1 Wiper insert complete. 18" / 450mm) - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm Hood clearance must exceed 1 5/8" (42mm) for installation. - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm OE Connector replacement P/No. 3 392 390 359 - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm Hood clearance must exceed 1 5/8 (42mm) for installation. - (1) Wiper insert complete w/Blade (Individually Sold) Micro-Edge Excel - Blade Lenth: 18", 450mm - 3 Door & 5 Door Hatchback - 3 Door & 5 Door Hatchback If using Bosch blade 40 718A or 40 918, adapter 43 000 may also be required. Adapter not required with NPW blade 27-218. - 3 Door & 5 Door Hatchback If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - 3 Door Coupe - 3 Door Hatchback - 450mm - 450mm (18") - bs063003: NWB changed the clip and adapter contents. No longer a "hook" and "bayonet" clip content. Now changed to a "multiclip." - California - Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm ** Separate connector S9 Required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - CONVERTIBLE - Coupe & Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Coupe (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. C, K3500 (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Exc. C, K3500 1990 (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Exc. California - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Exc. Electronically Adjustable Suspension (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Sierra Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm Connector Pre Installed - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm Connector Pre-Installed - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front & Rear No longer includes the "bayonet" adapter. Includes only the hook type clip. - Front - All : Rear - Hatchback (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Front Also fits Rear - Front, Passenger & Rear w/o Washer Nozzle (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Front/Hatchback Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - FWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - GTS (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Hatchback - Hatchback If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 718A or 40 918, adapter 43 000 may also be required. Adapter not required with NPW blade 27-218. - If using Bosch blade 40 719A, 43 000 adapter may also be required (included with Bosch 40 919 blade). Adapter not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - Left or Right for (DX) 3-Door & 5-Door Hatchback - Left or Right for (GL) 3-Door & 5-Door Hatchback - Models made in Japan - Models made in USA or Canada - No longer includes the "bayonet" adapter. Includes only the hook type clip. - NX 2 Door Coupe If using Bosch blade 40 718A or 40 918, adapter 43 000 may also be required. Adapter not required with NPW blade 27-218. - NX 2 Door Coupe If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - OE has no rear insert only. Just the blade. - Passenger - Passenger Side - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Blades Length: 18" 450mm - Passenger Side 475mm - Passenger's Side - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Passenger's Side - w/o Washer Nozzle (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Passenger's Side - Wagon (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - RWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - USA MADE MODELS ONLY. ITTA-ESNA - V8 5.7 (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - w/o Washer Nozzle - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Winter Blade -

Winter Blade - - (1 Wiper insert complete. 18" / 450mm) - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm Hood clearance must exceed 1 5/8" (42mm) for installation. - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm OE Connector replacement P/No. 3 392 390 359 - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm Hood clearance must exceed 1 5/8 (42mm) for installation. - (1) Wiper insert complete w/Blade (Individually Sold) Micro-Edge Excel - Blade Lenth: 18", 450mm - 3 Door & 5 Door Hatchback - 3 Door & 5 Door Hatchback If using Bosch blade 40 718A or 40 918, adapter 43 000 may also be required. Adapter not required with NPW blade 27-218. - 3 Door & 5 Door Hatchback If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - 3 Door Coupe - 3 Door Hatchback - 450mm - 450mm (18") - bs063003: NWB changed the clip and adapter contents. No longer a "hook" and "bayonet" clip content. Now changed to a "multiclip." - California - Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm ** Separate connector S9 Required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - CONVERTIBLE - Coupe & Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Coupe (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. C, K3500 (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Exc. C, K3500 1990 (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Exc. California - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Exc. Electronically Adjustable Suspension (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Sierra Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm Connector Pre Installed - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm Connector Pre-Installed - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front & Rear No longer includes the "bayonet" adapter. Includes only the hook type clip. - Front - All : Rear - Hatchback (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Front Also fits Rear - Front, Passenger & Rear w/o Washer Nozzle (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Front/Hatchback Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - FWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - GTS (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Hatchback - Hatchback If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 718A or 40 918, adapter 43 000 may also be required. Adapter not required with NPW blade 27-218. - If using Bosch blade 40 719A, 43 000 adapter may also be required (included with Bosch 40 919 blade). Adapter not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - Left or Right for (DX) 3-Door & 5-Door Hatchback - Left or Right for (GL) 3-Door & 5-Door Hatchback - Models made in Japan - Models made in USA or Canada - No longer includes the "bayonet" adapter. Includes only the hook type clip. - NX 2 Door Coupe If using Bosch blade 40 718A or 40 918, adapter 43 000 may also be required. Adapter not required with NPW blade 27-218. - NX 2 Door Coupe If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - OE has no rear insert only. Just the blade. - Passenger - Passenger Side - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Blades Length: 18" 450mm - Passenger Side 475mm - Passenger's Side - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Passenger's Side - w/o Washer Nozzle (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Passenger's Side - Wagon (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - RWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - USA MADE MODELS ONLY. ITTA-ESNA - V8 5.7 (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - w/o Washer Nozzle - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 18", 450mm - Winter Blade -

Micro Edge - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - 3 Door Coupe - 450mm w/o Fin - D-50 (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - Driver's Side & Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - Fits either right or left side - Fits either right or left side. - Front & Rear - Hatchback - If using Bosch blade 40 717A, adapter 43 000 may also be required (included with Bosch 40 917 blade). Adapter not required with NPW blade 27-217. - If using Bosch blade 40 717A, adaptor 43 000 may also be required (included with Bosch 40 917 blade). Adaptor not required with NPW blade 27-217. - Passenger - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - Twin screw type. - w/o Fin -

Position: Right
Micro Edge - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm Hood clearance must exceed 1 5/8 (42mm) for installation. - 3 Door & 5 Door Hatchback If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - 3 Door Coupe - 3 Door Hatchback - 475mm - 475mm, 19" - bs063003: NWB changed the clip and adapter contents. No longer a "hook" and "bayonet" clip content. Now changed to a "multiclip." - California - Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm ** Separate connector S9 Required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. California - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Exc. Electronically Adjustable Suspension (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front & Rear - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front Also fits Rear - Front Right - Hatchback - Hatchback If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adapter may also be required (included with Bosch 40 919 blade). Adapter not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - JAPAN MADE MODELS ONLY - Models made in Japan - Models made in USA or Canada - Non-winter blade - NX 2 Door Coupe If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - OE Blade only - Right or Rear This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additioanl cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Passenger Side - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Mico Edge Blade Length: 19" 480mm - Passenger Side 475mm - Passenger's Side - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Right - 475mm /19" - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Twin screw type - Twin screw type. - USA MADE MODELS ONLY. ITTA-ESNA - USA MADE MODELS ONLY. Nippon - USA MADE MODELS ONLY. Denso type. - USA MADE MODELS ONLY. Valeo type. -

Micro Edge - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm Hood clearance must exceed 1 5/8 (42mm) for installation. - 3 Door & 5 Door Hatchback If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - 3 Door Coupe - 3 Door Hatchback - 475mm - 475mm, 19" - bs063003: NWB changed the clip and adapter contents. No longer a "hook" and "bayonet" clip content. Now changed to a "multiclip." - California - Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm ** Separate connector S9 Required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. California - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Exc. Electronically Adjustable Suspension (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front & Rear - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front Also fits Rear - Front Right - Hatchback - Hatchback If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adapter may also be required (included with Bosch 40 919 blade). Adapter not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - JAPAN MADE MODELS ONLY - Models made in Japan - Models made in USA or Canada - Non-winter blade - NX 2 Door Coupe If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - OE Blade only - Right or Rear This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additioanl cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Passenger Side - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Mico Edge Blade Length: 19" 480mm - Passenger Side 475mm - Passenger's Side - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Right - 475mm /19" - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Twin screw type - Twin screw type. - USA MADE MODELS ONLY. ITTA-ESNA - USA MADE MODELS ONLY. Nippon - USA MADE MODELS ONLY. Denso type. - USA MADE MODELS ONLY. Valeo type. -

Position: Left
Micro Edge - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - 20 Inch (500 MM) - 20" - 5 Door Hatchback - 500mm - 500MM w/o Fin. - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Blade Length: 20" 500mm - Driver's Side -Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Exc. Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Fastback Hatch - For OE blade only. This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. Some applications may also require trimming of the insert once it has been installed. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - FWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - GSI (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Hatchback - Hook Arm - Pin Arm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Late (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Premium (20") - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper t arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Winter (20") -

Excel+ - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - 3 Door Coupe - D-50 (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - Driver's Side & Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - Fits either right or left side - Fits either right or left side. - Front & Rear - Hatchback - If using Bosch blade 40 717A, adapter 43 000 may also be required (included with Bosch 40 917 blade). Adapter not required with NPW blade 27-217. - If using Bosch blade 40 717A, adaptor 43 000 may also be required (included with Bosch 40 917 blade). Adaptor not required with NPW blade 27-217. - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - Twin screw type. - w/o Fin -

Position: Right
Excel+ - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm Hood clearance must exceed 1 5/8 (42mm) for installation. - 3 Door & 5 Door Hatchback If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - 3 Door Hatchback - 475mm, 19" - bs063003: NWB changed the clip and adapter contents. No longer a "hook" and "bayonet" clip content. Now changed to a "multiclip." - California - Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm ** Separate connector S9 Required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. California - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Exc. Electronically Adjustable Suspension (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front & Rear - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front Also fits Rear - Front Right - Hatchback - Hatchback If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adapter may also be required (included with Bosch 40 919 blade). Adapter not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - JAPAN MADE MODELS ONLY - L=475mm - Models made in Japan - Models made in USA or Canada - Non-winter blade - NX 2 Door Coupe If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - OE Blade only - Right or Rear This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additioanl cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Mico Edge Blade Length: 19" 480mm - Passenger's Side - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Twin screw type - USA MADE MODELS ONLY. Denso type. - USA MADE MODELS ONLY. Valeo type. -

Excel+ - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm Hood clearance must exceed 1 5/8 (42mm) for installation. - 3 Door & 5 Door Hatchback If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - 3 Door Hatchback - 475mm, 19" - bs063003: NWB changed the clip and adapter contents. No longer a "hook" and "bayonet" clip content. Now changed to a "multiclip." - California - Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm ** Separate connector S9 Required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. California - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Exc. Electronically Adjustable Suspension (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front & Rear - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front Also fits Rear - Front Right - Hatchback - Hatchback If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adapter may also be required (included with Bosch 40 919 blade). Adapter not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - JAPAN MADE MODELS ONLY - L=475mm - Models made in Japan - Models made in USA or Canada - Non-winter blade - NX 2 Door Coupe If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - OE Blade only - Right or Rear This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additioanl cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Mico Edge Blade Length: 19" 480mm - Passenger's Side - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Twin screw type - USA MADE MODELS ONLY. Denso type. - USA MADE MODELS ONLY. Valeo type. -

Quality: OEM
Position: Right
High-profile - - 3 Door Hatchback - bs063003: NWB changed the clip and adapter contents. No longer a "hook" and "bayonet" clip content. Now changed to a "multiclip." - California - Exc. California - Hatchback - Models made in Japan - Models made in USA or Canada - OE Blade only - Right or Rear This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additioanl cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - USA MADE MODELS ONLY. Denso type. -

Position: Left
- OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. -

Position: Left
Winter Blade - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - 20 Inch (500 MM) - 20" - 22 Inch (550mm) - 22 Inch (550mm) - Aftermarket blades have no provisions for air deflector used on the original blade
Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 5 Door Hatchback - 500mm - 500MM w/o Fin. - 530mm, 21" - 550mm - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Convertible Excel+ Blade Length: 21" 530mm - Driver's Side - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Blade Length: 20" 500mm - Driver's Side -Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side Excel+ Blade Length: 21" 530mm - Drivers Side 550mm - Exc. 1994 Convertible - Exc. Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Excel+ Blade Length: 21" 530mm - Fastback Hatch - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - FWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - GSI (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Hatchback - Hook Arm - Pin Arm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - If using Bosch blade 40 721, 43 000 adaptor may also be required (included with Bosch 40 921 blade). Adaptor not required with NPW blade 27-221. - JAPAN MADE MODELS ONLY - Late (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger Side Excel+ Blade Length: 21" 530mm - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger's Side - Coupe Excel+ Blade Length: 21" 530mm - Premium (20") - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper t arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - This is a 2-blade kit when sold by the dealer. As the Bosch blades we sell in place of this OE kit are sold individually, be sure to confirm the correct number of blades that the vehicle requires. - w/o Fin - Windshield
This is a 2-blade kit as sold by the dealer. As the Bosch blades we sell in place of the OE kit are SOLD INDIVIDUALLY, be sure to confirm the correct number of blades that the vehicle requires. - Winter (20") - Winter Blade -

Position: Left
Micro Edge - - (530mm, 21") - 21" - 22 Inch (550mm) - 22 Inch (550mm) - Aftermarket blades have no provisions for air deflector used on the original blade
Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 530mm - 530mm - 21" - 530mm, 21" - 530mm- 21" - 530mm-21" - 550mm - Convertible Excel+ Blade Length: 21" 530mm - Driver's Side Excel+ Blade Length: 21" 530mm - Drivers Side 550mm - Exc. 1994 Convertible - Excel+ Blade Length: 21" 530mm - Front Right & Left - 530mm-21" - If using Bosch blade 40 721, 43 000 adaptor may also be required (included with Bosch 40 921 blade). Adaptor not required with NPW blade 27-221. - JAPAN MADE MODELS ONLY - L=530mm - Micro Blade - Micro Edge - NWB changed the clip contents. No longer a "hook" clip. Now chang ed to a "multiclip." - Passenger Side Excel+ Blade Length: 21" 530mm - Passenger's Side - Coupe Excel+ Blade Length: 21" 530mm - Right & Left - 530mm-21" - This is a 2-blade kit as sold by the dealer. As the Bosch blades we sell in place of the OE kit are sold individually, be sure to confirm the correct number of blades that the vehicle requires. - This is a 2-blade kit when sold by the dealer. As the Bosch blades we sell in place of this OE kit are sold individually, be sure to confirm the correct number of blades that the vehicle requires. - Twin screw type. - USA MADE MODELS ONLY. ITTA-ESNA - USA MADE MODELS ONLY. Nippon - w/o Fin - Windshield
This is a 2-blade kit as sold by the dealer. As the Bosch blades we sell in place of the OE kit are SOLD INDIVIDUALLY, be sure to confirm the correct number of blades that the vehicle requires. - Wiper Micro Blade -

Position: Left
Excel+ - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - 20 Inch (500 MM) - 20" - 5 Door Hatchback - 500mm - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Convertible Excel+ Blade Length: 21" 530mm - Driver's Side - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Blade Length: 20" 500mm - Driver's Side -Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side Excel+ Blade Length: 21" 530mm - Exc. Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Excel+ Blade Length: 21" 530mm - Fastback Hatch - For OE blade only. This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. Some applications may also require trimming of the insert once it has been installed. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - FWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - GSI (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Hatchback - Hook Arm - Pin Arm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Late (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger Side Excel+ Blade Length: 21" 530mm - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger's Side - Coupe Excel+ Blade Length: 21" 530mm - Premium (20") - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper t arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Winter (20") -

Quality: OEM
attaches w/ 2 screws - - 3 Door & 5 Door Hatchback If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - Hatchback If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adapter may also be required (included with Bosch 40 919 blade). Adapter not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - NX 2 Door Coupe If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. -

Position: Left
Micro Edge - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed 1 5/8 (42mm) for installation - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed 1 5/8" (42mm) for installation - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed1 5/8 (42mm) for Installation - (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - 22 Inch (550mm) - 22 Inch (550mm) - Aftermarket blades have no provisions for air deflector used on the original blade
Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 22" - 22" (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 22" (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - 22" - w/ spoiler - 22" - w/o Spoiler - 550mm - 550mm - 22" - 552mm - Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's & Rear Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - Driver's Side - 550mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side - Wagon (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Drivers Side 550mm - Early (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Police Package - Exc. Sierra Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Station Wagon (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - If using Bosch blade 40 722A or 40 922, 43 000 adapter may also be required. Adapter not required with NPW blade 27-221. - Micro Edge Excel 16" - Wagon - Drivers' Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Micro Edge Excel 22" (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Non-winter blade - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Pass. w/ 22" Blade (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger Side - Coupe (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger w/ 22" Blade (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Sedan - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - SWF 22"/550mm - w/o Fin - Winter blade -

Quality: OEM
Position: Left
high-profile - - 5 Door Hatchback - Fastback Hatch - For OE blade only. This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. Some applications may also require trimming of the insert once it has been installed. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Hatchback - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper t arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. -

Quality: OEM
Position: Right
- 3 Door Coupe - 3 Door Hatchback - 475mm - bs063003: NWB changed the clip and adapter contents. No longer a "hook" and "bayonet" clip content. Now changed to a "multiclip." - California - Driver's Side - Exc. California - Front & Rear - Hatchback - JAPAN MADE MODELS ONLY - L=475mm - Models made in Japan - Models made in USA or Canada - Non-winter blade - OE Blade only - Right or Rear This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additioanl cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Passenger Side - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Twin screw type. - USA MADE MODELS ONLY. ITTA-ESNA - USA MADE MODELS ONLY. Nippon - USA MADE MODELS ONLY. Denso type. - USA MADE MODELS ONLY. Valeo type. -

Position: Left
Winter Blade - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed 1 5/8 (42mm) for installation - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed 1 5/8" (42mm) for installation - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed1 5/8 (42mm) for Installation - (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - 22" - 22" (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 22" (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's & Rear Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - Driver's Side - 550mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side - Wagon (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Early (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Sierra Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Station Wagon (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Micro Edge Excel 16" - Wagon - Drivers' Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Micro Edge Excel 22" (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - OES sells this as a set/pair. Ours are individual and will service the right OR left side. - Pass. w/ 22" Blade (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger Side - Coupe (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger w/ 22" Blade (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Sedan - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm -

Position: Right
Evolution - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm Hood clearance must exceed 1 5/8 (42mm) for installation. - 3 Door & 5 Door Hatchback If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - 3 Door Coupe - 3 Door Hatchback - 475mm, 19" - bs063003: NWB changed the clip and adapter contents. No longer a "hook" and "bayonet" clip content. Now changed to a "multiclip." - California - Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm ** Separate connector S9 Required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. California - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Exc. Electronically Adjustable Suspension (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front & Rear - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front Also fits Rear - Front Right - Hatchback - Hatchback If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adapter may also be required (included with Bosch 40 919 blade). Adapter not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - JAPAN MADE MODELS ONLY - Models made in Japan - Models made in USA or Canada - Non-winter blade - NX 2 Door Coupe If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - OE Blade only - Right or Rear This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additioanl cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Mico Edge Blade Length: 19" 480mm - Passenger Side 475mm - Passenger's Side - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Right - 475mm /19" - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Twin screw type - Twin screw type. - USA MADE MODELS ONLY. ITTA-ESNA - USA MADE MODELS ONLY. Nippon - USA MADE MODELS ONLY. Denso type. - USA MADE MODELS ONLY. Valeo type. -

Evolution - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - 3 Door Coupe - 450mm w/o Fin - D-50 (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - Driver's Side & Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - Front & Rear - Hatchback - If using Bosch blade 40 717A, adapter 43 000 may also be required (included with Bosch 40 917 blade). Adapter not required with NPW blade 27-217. - If using Bosch blade 40 717A, adaptor 43 000 may also be required (included with Bosch 40 917 blade). Adaptor not required with NPW blade 27-217. - Passenger - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 16.7" 425mm - w/o Fin -

Evolution - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm Hood clearance must exceed 1 5/8 (42mm) for installation. - 3 Door & 5 Door Hatchback If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - 3 Door Coupe - 3 Door Hatchback - 475mm, 19" - bs063003: NWB changed the clip and adapter contents. No longer a "hook" and "bayonet" clip content. Now changed to a "multiclip." - California - Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm ** Separate connector S9 Required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required - Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm **Separate Connector S9 required (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. California - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Mircro-Edge Excel Blade Lenth: 19" 475mm - Exc. Electronically Adjustable Suspension (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front & Rear - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Front Also fits Rear - Front Right - Hatchback - Hatchback If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adapter may also be required (included with Bosch 40 919 blade). Adapter not required with NPW blade 27-219. - If using Bosch blade 40 719A, 43 000 adaptor may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - JAPAN MADE MODELS ONLY - Models made in Japan - Models made in USA or Canada - Non-winter blade - NX 2 Door Coupe If using Bosch blade 40 719A, adaptor 43 000 may also be required (included with Bosch 40 919 blade). Adaptor not required with NPW blade 27-219. - OE Blade only - Right or Rear This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additioanl cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Mico Edge Blade Length: 19" 480mm - Passenger Side 475mm - Passenger's Side - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Lenth: 19" 475mm - Right - 475mm /19" - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Twin screw type - Twin screw type. - USA MADE MODELS ONLY. ITTA-ESNA - USA MADE MODELS ONLY. Nippon - USA MADE MODELS ONLY. Denso type. - USA MADE MODELS ONLY. Valeo type. -

Position: Left
Excel+ - - (530mm, 21") - 21" - 530mm - 530mm - 21" - 530mm, 21" - 530mm- 21" - 530mm-21" - Bosch 40 921 blade fits but is W/O 'wind deflector' as OE - Convertible Excel+ Blade Length: 21" 530mm - Driver's Side Excel+ Blade Length: 21" 530mm - Exc. 1994 Convertible - Excel+ Blade Length: 21" 530mm - Front Right & Left - 530mm-21" - If using Bosch blade 40 721, 43 000 adaptor may also be required (included with Bosch 40 921 blade). Adaptor not required with NPW blade 27-221. - JAPAN MADE MODELS ONLY - L=530mm - Micro Blade - Micro Edge - NWB changed the clip contents. No longer a "hook" clip. Now chang ed to a "multiclip." - Passenger Side Excel+ Blade Length: 21" 530mm - Passenger's Side - Coupe Excel+ Blade Length: 21" 530mm - Right & Left - 530mm-21" - This is a 2-blade kit as sold by the dealer. As the Bosch blades we sell in place of the OE kit are sold individually, be sure to confirm the correct number of blades that the vehicle requires. - This is a 2-blade kit when sold by the dealer. As the Bosch blades we sell in place of this OE kit are sold individually, be sure to confirm the correct number of blades that the vehicle requires. - Twin screw type. - Windshield
This is a 2-blade kit as sold by the dealer. As the Bosch blades we sell in place of the OE kit are SOLD INDIVIDUALLY, be sure to confirm the correct number of blades that the vehicle requires. - Wiper Micro Blade -

Quality: OEM
Position: Right
Endurovision - - 3 Door Hatchback - bs063003: NWB changed the clip and adapter contents. No longer a "hook" and "bayonet" clip content. Now changed to a "multiclip." - California - Exc. California - Hatchback - JAPAN MADE MODELS ONLY - Models made in Japan - Models made in USA or Canada - Non-winter blade - OE Blade only - Right or Rear This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additioanl cost. - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - USA MADE MODELS ONLY. ITTA-ESNA - USA MADE MODELS ONLY. Nippon - USA MADE MODELS ONLY. Denso type. - USA MADE MODELS ONLY. Valeo type. -

Position: Left
Excel+ - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed 1 5/8 (42mm) for installation - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed 1 5/8" (42mm) for installation - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed1 5/8 (42mm) for Installation - (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - 22 Inch (550mm) - 22 Inch (550mm) - Aftermarket blades have no provisions for air deflector used on the original blade
Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 22" - 22" (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 22" (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - 22" - w/ spoiler - 22" - w/o Spoiler - 550mm - 552mm - Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's & Rear Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - Driver's Side - 550mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side - Wagon (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Drivers Side 550mm - Early (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Police Package - Exc. Sierra Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Station Wagon (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - If using Bosch blade 40 722A or 40 922, 43 000 adapter may also be required. Adapter not required with NPW blade 27-221. - Micro Edge Excel 16" - Wagon - Drivers' Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Micro Edge Excel 22" (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Pass. w/ 22" Blade (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger Side - Coupe (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger w/ 22" Blade (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Sedan - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - SWF 22"/550mm - w/o Fin -

Position: Left
Evolution - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed 1 5/8 (42mm) for installation - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed 1 5/8" (42mm) for installation - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed1 5/8 (42mm) for Installation - (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - 22 Inch (550mm) - 22 Inch (550mm) - Aftermarket blades have no provisions for air deflector used on the original blade
Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 22" (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 22" (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - 22" - w/ spoiler - 22" - w/o Spoiler - 550mm - 550mm - 22" - 552mm - Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's & Rear Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - Driver's Side - 550mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side - Wagon (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Drivers Side 550mm - Early (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Sierra Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Station Wagon (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - If using Bosch blade 40 722A or 40 922, 43 000 adapter may also be required. Adapter not required with NPW blade 27-221. - Micro Edge Excel 16" - Wagon - Drivers' Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Micro Edge Excel 22" (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Non-winter blade - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Pass. w/ 22" Blade (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger Side - Coupe (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger w/ 22" Blade (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Sedan - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - SWF 22"/550mm - w/o Fin - Winter blade -

Position: Left
Evolution - - (530mm, 21") - 21" - 22 Inch (550mm) - 22 Inch (550mm) - Aftermarket blades have no provisions for air deflector used on the original blade
Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 530mm - 530mm - 21" - 530mm, 21" - 530mm- 21" - 530mm-21" - 550mm - Convertible Excel+ Blade Length: 21" 530mm - Driver's Side Excel+ Blade Length: 21" 530mm - Drivers Side 550mm - Exc. 1994 Convertible - Excel+ Blade Length: 21" 530mm - Front Right & Left - 530mm-21" - If using Bosch blade 40 721, 43 000 adaptor may also be required (included with Bosch 40 921 blade). Adaptor not required with NPW blade 27-221. - JAPAN MADE MODELS ONLY - L=530mm - Micro Blade - Micro Edge - NWB changed the clip contents. No longer a "hook" clip. Now chang ed to a "multiclip." - Passenger Side Excel+ Blade Length: 21" 530mm - Passenger's Side - Coupe Excel+ Blade Length: 21" 530mm - Right & Left - 530mm-21" - This is a 2-blade kit as sold by the dealer. As the Bosch blades we sell in place of the OE kit are sold individually, be sure to confirm the correct number of blades that the vehicle requires. - This is a 2-blade kit when sold by the dealer. As the Bosch blades we sell in place of this OE kit are sold individually, be sure to confirm the correct number of blades that the vehicle requires. - Twin screw type. - USA MADE MODELS ONLY. ITTA-ESNA - USA MADE MODELS ONLY. Nippon - w/o Fin - Windshield
This is a 2-blade kit as sold by the dealer. As the Bosch blades we sell in place of the OE kit are SOLD INDIVIDUALLY, be sure to confirm the correct number of blades that the vehicle requires. - Wiper Micro Blade -

Position: Left
Evolution - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - 20" - 5 Door Hatchback - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Blade Length: 20" 500mm - Driver's Side -Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Exc. Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Fastback Hatch - For OE blade only. This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. Some applications may also require trimming of the insert once it has been installed. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - FWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - GSI (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Hatchback - Hook Arm - Pin Arm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Late (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Premium (20") - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper t arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Winter (20") -

Quality: OEM
Position: Left
Endurovision - - 5 Door Hatchback - Fastback Hatch - For OE blade only. This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. Some applications may also require trimming of the insert once it has been installed. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Hatchback - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper t arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. -

Quality: OEM
Position: Left
- NWB changed the clip contents. No longer a "hook" clip. Now chang ed to a "multiclip." - Windshield
This is a 2-blade kit as sold by the dealer. As the Bosch blades we sell in place of the OE kit are SOLD INDIVIDUALLY, be sure to confirm the correct number of blades that the vehicle requires. -

Quality: OEM
Position: Left
- (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - 20 Inch (500 MM) - 20" - 5 Door Hatchback - 500mm - 500MM w/o Fin. - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side -Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Exc. Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Fastback Hatch - For OE blade only. This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. Some applications may also require trimming of the insert once it has been installed. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - FWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - GSI (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Hatchback - Hook Arm - Pin Arm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Late (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenge's Side - Right Side - Passenger Side - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger's Side - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Premium (20") - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper t arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Winter (20") -

Quality: OEM
Position: Left
Endurovision - - JAPAN MADE MODELS ONLY - NWB changed the clip contents. No longer a "hook" clip. Now chang ed to a "multiclip." - USA MADE MODELS ONLY. ITTA-ESNA - USA MADE MODELS ONLY. Nippon -

Quality: OEM
Position: Left
- JAPAN MADE MODELS ONLY - L=530mm - NWB changed the clip contents. No longer a "hook" clip. Now chang ed to a "multiclip." - Twin screw type. - USA MADE MODELS ONLY. ITTA-ESNA - USA MADE MODELS ONLY. Nippon - Windshield
This is a 2-blade kit as sold by the dealer. As the Bosch blades we sell in place of the OE kit are SOLD INDIVIDUALLY, be sure to confirm the correct number of blades that the vehicle requires. -

Quality: OEM
Position: Left
- (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed 1 5/8 (42mm) for installation - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed 1 5/8" (42mm) for installation - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm Hood Clearance must exceed1 5/8 (42mm) for Installation - (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - 22 Inch (550mm) - 22 Inch (550mm) - Aftermarket blades have no provisions for air deflector used on the original blade
Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 22" - 22" (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 22" (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - 550mm - Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's & Rear Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Excel Blade Length: 22" 550mm - Driver's Side - 550mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Driver's Side - Wagon (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Drivers Side 550mm - Early (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Sierra Classic (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Exc. Station Wagon (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Micro Edge Excel 16" - Wagon - Drivers' Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Micro Edge Excel 22" (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Non-winter blade - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Pass. w/ 22" Blade (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger Side - Coupe (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger w/ 22" Blade (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Passenger's Side - Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - Sedan - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - w/o Fin - Winter blade -

Position: Left
Wiper Blade ICON Left - - 552mm - OE blade only This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. -