Land Rover Defender Brake Pads - Select Year

Position: Rear
w/ Sensor W/ Hardware, Ferodo The rear brakes of most Rover models 1987 thru 1995 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we have found a cure for this 'noisy' circumstance. The installation of 'Dampening Plate' in the rear caliper piston will eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Rear
4WD Super - w/ Sensor W/ Hardware, Ferodo The rear brakes of most Rover models 1987 thru 1995 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we have found a cure for this 'noisy' circumstance. The installation of 'Dampening Plate' in the rear caliper piston will eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) - w/o Sensor The rear brakes of most Rover models 1987 thru 2000 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we found a cure for this 'noise/squeak' circumstance. The installation of 'Dampening Plates'in the rear caliper piston should eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Rear
w/ Sensor W/ Hardware, Ferodo The rear brakes of most Rover models 1987 thru 1995 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we have found a cure for this 'noisy' circumstance. The installation of 'Dampening Plate' in the rear caliper piston will eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Front
4WD Super - - w/ Vented Rotors -

Position: Front
4WD Super - - w/ Vented Rotors -

Position: Front
w/o Shims - - w/ Vented Rotors -

Position: Front
w/o Shims - - w/ Vented Rotors -

Position: Rear
EURO Ceramic w/Shims - w/ Sensor W/ Hardware, Ferodo The rear brakes of most Rover models 1987 thru 1995 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we have found a cure for this 'noisy' circumstance. The installation of 'Dampening Plate' in the rear caliper piston will eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) - w/o Sensor The rear brakes of most Rover models 1987 thru 2000 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we found a cure for this 'noise/squeak' circumstance. The installation of 'Dampening Plates'in the rear caliper piston should eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -