Land Rover Discovery Brake Pads - Select Year

Position: Rear
Deluxe - Mintex OEM Lucas - OEM -

Position: Rear
Ulitmate - Ceramic - Mintex OEM Lucas - OEM -

Position: Rear
OEM - w/o Sensor The rear brakes of most Rover models 1987 thru 2000 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we found a cure for this 'noise/squeak' circumstance. The installation of 'Dampening Plates'in the rear caliper piston should eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Rear
Ultimate - Ceramic - w/o Sensor The rear brakes of most Rover models 1987 thru 2000 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we found a cure for this 'noise/squeak' circumstance. The installation of 'Dampening Plates'in the rear caliper piston should eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Rear
w/ Sensor W/ Hardware, Ferodo The rear brakes of most Rover models 1987 thru 1995 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we have found a cure for this 'noisy' circumstance. The installation of 'Dampening Plate' in the rear caliper piston will eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Rear
w/o Sensor The rear brakes of most Rover models 1987 thru 2000 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we found a cure for this 'noise/squeak' circumstance. The installation of 'Dampening Plates'in the rear caliper piston should eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Rear
w/o Sensor The rear brakes of most Rover models 1987 thru 2000 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we found a cure for this 'noise/squeak' circumstance. The installation of 'Dampening Plates'in the rear caliper piston should eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Rear
4WD Super - w/o Sensor The rear brakes of most Rover models 1987 thru 2000 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we found a cure for this 'noise/squeak' circumstance. The installation of 'Dampening Plates'in the rear caliper piston should eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Rear
4WD Super - w/ Sensor W/ Hardware, Ferodo The rear brakes of most Rover models 1987 thru 1995 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we have found a cure for this 'noisy' circumstance. The installation of 'Dampening Plate' in the rear caliper piston will eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) - w/o Sensor The rear brakes of most Rover models 1987 thru 2000 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we found a cure for this 'noise/squeak' circumstance. The installation of 'Dampening Plates'in the rear caliper piston should eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Rear
4WD Super - w/ Sensor W/ Hardware, Ferodo The rear brakes of most Rover models 1987 thru 1995 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we have found a cure for this 'noisy' circumstance. The installation of 'Dampening Plate' in the rear caliper piston will eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) - w/o Sensor The rear brakes of most Rover models 1987 thru 2000 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we found a cure for this 'noise/squeak' circumstance. The installation of 'Dampening Plates'in the rear caliper piston should eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Rear
Mintex OEM Lucas -

Position: Rear
w/ Sensor W/ Hardware, Ferodo The rear brakes of most Rover models 1987 thru 1995 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we have found a cure for this 'noisy' circumstance. The installation of 'Dampening Plate' in the rear caliper piston will eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Rear
Mintex OEM Lucas -

Position: Front
-

Position: Front
-

Position: Front
4WD Super - - w/ Sensor With vented rotors and ABS. The frontbrakes of most Rover models 1987 thru 1995 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we have found a cure for this 'noisy' circumstance. The installation of 'Dampening Plate' in the Front caliper piston will eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Rear
ACT Ceramic w/ Shims - Mintex OEM Lucas - OEM -

Position: Front
-

Position: Front
4WD Super - -

Position: Front
4WD Super - -

Position: Rear
EURO Ceramic w/Shims - w/ Sensor W/ Hardware, Ferodo The rear brakes of most Rover models 1987 thru 1995 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we have found a cure for this 'noisy' circumstance. The installation of 'Dampening Plate' in the rear caliper piston will eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) - w/o Sensor The rear brakes of most Rover models 1987 thru 2000 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we found a cure for this 'noise/squeak' circumstance. The installation of 'Dampening Plates'in the rear caliper piston should eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Rear
EURO Ceramic w/Shims - w/ Sensor W/ Hardware, Ferodo The rear brakes of most Rover models 1987 thru 1995 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we have found a cure for this 'noisy' circumstance. The installation of 'Dampening Plate' in the rear caliper piston will eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) - w/o Sensor The rear brakes of most Rover models 1987 thru 2000 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we found a cure for this 'noise/squeak' circumstance. The installation of 'Dampening Plates'in the rear caliper piston should eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Rear
EURO Ceramic w/Shims - Mintex OEM Lucas - OEM -

Position: Front
ACT Ceramic w/ Shims - -

Position: Front
EURO Ceramic w/Shims - - w/ Sensor With vented rotors and ABS. The frontbrakes of most Rover models 1987 thru 1995 have a tendency to make noise. This 'noise' or 'squeak' occurs no matter what brand of brake pad is used. Through some field research we have found a cure for this 'noisy' circumstance. The installation of 'Dampening Plate' in the Front caliper piston will eliminate the noise caused by piston/pad friction. * Requires '2' plates per caliper. (* Dampening Plate part# 928 351 096 18) -

Position: Front
EURO Ceramic w/Shims - -

Position: Rear
Mintex OEM Lucas -

Position: Front
-

Position: Front
-