Nissan 200SX Serpentine Belt

DAYCO SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 40.55 in. effective length, W rib profile, standard rib type, rubber backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Quantity Sold: Sold individually

Warranty: Dayco limited warranty

Part #: DY5060405

MR GASKET WATER PUMP BELT -- A high quality water pump belt for electric water pump drive kit part number 4333; A high quality water pump belt; With Mr. Gasket's limited 90-day warranty.

Quantity Sold: Sold individually

Warranty: 90-day Mr Gasket limited warranty

Part #: G124397

DAYCO TOP COG V-BELT -- 33.5 in. effective length, 33.8 in. outside circumference, 0.53 in. top width, 36 degrees angle; Features raw edge construction combined with Dayco's patented cogged top design to ensure the top performance needed by today's vehicles; Delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts; The three plies of neoprene impregnated fabric resist heat, oil and grease and a specially formulated treatment of the polyester cord provides the strength, stability, and reliability that are required of a national brand V-belt; With Dayco limited warranty.

Quantity Sold: Sold individually

Part #: DY17335

AC DELCO FAN BELT -- 0.41 in. x 36.13 in.; V-belt; A high quality, OE replacement fan belt; Replaces OE number 88934299; With lifetime AC Delco limited warranty.

Quantity Sold: Sold individually

Warranty: Lifetime AC Delco limited warranty

Part #: AC15355

GATES AUTO XL V BELT -- 36 angle, 35.6 in. effective L, 36.18 in. outside circumference, 0.4 in. top W; Features improved belt performance that occurs by reducing tension decay and noise, and precise top width and sidewall for proper fit and quieter belt; It tightens on the drive as it gets hot; Meets or exceeds SAE J636c specifications; With Lifetime Gates limited warranty.

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GAT7355

LISLE RATCHETING SERPENTINE BELT TOOL -- Includes 19 mm socket for Honda and Toyota applications; Features ratcheting head with freewheel position that allows maximum leverage; Used for releasing tension on serpentine belts with a spring loaded idler pulley; Comes with extension arm for use in hard to reach idler pulleys.

Quantity Sold: Sold individually

Part #: L1759000

GATES MICRO-V BELT -- 33.46 in. effective L, 34.02 in. outside circumference, 0.56 in. top width; The belt construction eliminates noise, reduces tension loss, and solves problem drives; Features added tensile members and rib reinforcement for wear and crack resistance; Meets or exceeds SAE J1459 specifications; Designed for small diameter pulley, backside idler and automatic tensioner; Replaces belts on serpentine drive and other V-ribbed belt applications.

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GATK040335

DAYCO SERPENTINE BELT -- 6-rib, 0.17 in. thick, 0.82 in. top width, 32.5 in. effective length, W rib profile, standard rib type, fabric backside material, EPDM, Aramid reinforced compound; Multiple-rib design provides better belt-to-pulley contact for less slippage extending its service than conventional V-belts; Eliminates the need for matching and allows controlled slippage in shock overload situations; Transverse groove design runs cooler up to 50 degrees Fahrenheit and dramatically reduces rib cracking for longer belt life of at least 40 percent; The groove design provides flexual stress relief for increased flexibility in both normal and backside bending; Also renders the belt less susceptible to environmental factors such as dust and splash-induced slip; Superior manufacturing technology uses a rubber backing that maximizes load-carrying capability and minimizes the noise that is often associated with competition's belts; Torque-carrying capacity meets or even exceeds conventional multi-rib belts; Features a cord saturated with a specially formulated treatment that insures length and tension stability.

Quantity Sold: Sold individually

Warranty: Dayco limited warranty

Part #: DY5060325

AC DELCO FAN BELT -- 9/16 in. x 35 in.; Serpentine belt; A high quality, OE replacement fan belt; With lifetime AC Delco limited warranty.

Quantity Sold: Sold individually

Part #: AC4K345

GATES MICRO-V BELT -- 32.16 in. effective length, 32.72 in. outside circumference, 0.56 in. top width; The belt construction eliminates noise, reduces tension loss, and solves problem drives; Features added tensile members and rib reinforcement for wear and crack resistance; Meets or exceeds SAE J1459 specifications; Designed for small diameter pulley, backside idler and automatic tensioner; Replaces belts on serpentine drive and other V-ribbed belt applications.

Quantity Sold: Sold individually

Warranty: Lifetime Gates limited warranty

Part #: GATK040320