Porsche 914 Timing Chain Tensioner - Select Year

Camshaft Chain - w/ Conversion Engine oil pressure feed. - Prior to installation, remove the safety pin from the tensioner, hold tensioner in a bucket with oil and pump the piston until no air comes out. When installed there could be still some air in the oil line leading to the tensioner. Therefore, steps should be taken that the engine does not start when starter motor is turning. Remove the main ignition cable or pull the plug of the fuel pump relay to stop the engine from starting up. Turn the engine over pumping oil through the system and air out of the lines. - Camshaft Chain Engine oil pressure feed. - Prior to installation, remove the safety pin from the tensioner, hold tensioner in a bucket with oil and pump the piston until no air comes out. When installed there could be still some air in the oil line leading to the tensioner. Therefore, steps should be taken that the engine does not start when starter motor is turning. Remove the main ignition cable or pull the plug of the fuel pump relay to stop the engine from starting up. Turn the engine over pumping oil through the system and air out of the lines. - Camshaft Chain Engine oil pressure feed. - Prior to installation, remove the safety pin from the tensioner, hold tensioner in a bucket with oil and pump the piston until no air comes out. When installed there could be still some air in the oil line leading to the tensioner. Therefore, steps should be taken that the engine does not start when starter motor is turning. Remove the main ignition cable or pull the plug of the fuel pump relay to stop the engine from starting up. Turn the engine over pumping oil through the system and air out of the lines. - Prior to installation, remove the safety pin from the tensioner, hold tensioner in a bucket with oil and pump the piston until no air comes out. When installed there could be still some air in the oil line leading to the tensioner. Therefore, steps should be taken that the engine does not start when starter motor is turning. Remove the main ignition cable or pull the plug of the fuel pump relay to stop the engine from starting up. Turn the engine over pumping oil through the system and air out of the lines. -

Camshaft Chain - Also Turbo 930 Note : 930 105 513 00 spacer must be used on models up through 1980. Self contained hydraulic unit. - Camshaft Chain Note : 930 105 513 00 spacer must be used on models up through 1980. Self contained hydraulic unit. -