Saturn Sky Cold Air Intake

FUJITA COLD AIR INTAKE

Fujita's cold air intake is designed to maximize air flow with its high gloss air horn that enables air to enter the intake chamber in a high velocity spiral motion. It provides stabilized intake function in times of unwanted stress during load through its TIG welded brackets used in conjunction with rubber vibration mount dampening.

Specifications

• Synthetic filter material
• Dry filter element
• Without heat shield
• Polished tube finish
• 6061-T6 aluminum tube material

Features

• Washable and reusable air filter

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Sold individually

Part #: FUJCA-3006

FUJITA COLD AIR INTAKE

Fujita's cold air intake is designed to maximize air flow with its high gloss air horn that enables air to enter the intake chamber in a high velocity spiral motion. It provides stabilized intake function in times of unwanted stress during load through its TIG welded brackets used in conjunction with rubber vibration mount dampening.

Specifications

• Synthetic filter material
• Dry filter element
• Without heat shield
• Polished tube finish
• 6061-T6 aluminum tube material

Features

• Washable and reusable air filter

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Sold individually

Part #: FUJCA-3007

K&N 69 SERIES TYPHOON COLD AIR INTAKE SYSTEM -- 50-state legal; Provides additional power up to 10.98 h.p. at 4900 RPM; 96 to 99 percent filtration efficiency; Includes black intake tube, red air filter, heat shield, and all the necessary hardware for installation; High-flow intake kit for sport compact and sports car; Features T-6063 aluminum intake tube that is custom engineered and aerodynamically designed to drive air into your engine; Its washable and reusable air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow; Virtually eliminates intake tract restriction by replacing the air filter and the entire air path to the engine; Can go up to 100,000 miles between cleanings depending on driving conditions; Easy to install.

Series: K&N 69 Typhoon

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33698433TTK

K&N 69 SERIES TYPHOON COLD AIR INTAKE SYSTEM

K&N's 69 Series Typhoon cold air intake kit is designed to replace your vehicle's restrictive factory air filter and air intake housing. It dramatically reduces intake restriction resulting in additional power and torque. Custom engineered and aerodynamically designed to drive more air into your engine. Its air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow.

Specifications

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Silver tube finish
• T-6063 aluminum tube material

Features

• Provides power up to 5.41 h.p. at 4700 rpm
• Up to 99% filtration efficiency
• Mandrel-bent tubing
• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Series: K&N 69 Typhoon

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Assembly

Warranty: Million-mile K&N limited warranty

Part #: K33698432TS

AEM COLD AIR INDUCTION SYSTEM

AEM's Cold Air Induction System is engineered to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.

Specifications

• Synthetic filter material
• Dry filter element
• Without heat shield
• Polished tube finish
• T-6063 aluminum tube material

Features

• Provides power up to 4 h.p. and 4.4 lb.-ft. of torque
• Up to 99.52% filtration efficiency
• Mandrel-bent tubing
• Washable and reusable air filter
• Manufactured and assembled in the U.S.A.

Notes

• Product legal for sale in California under Executive Order (EO) number D-670. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Type: Direct fit, 50-state legal

Quantity Sold: Assembly

Warranty: Lifetime AEM limited warranty

Part #: A1821536P

FUJITA COLD AIR INTAKE -- 50-state legal; Increases horsepower by 15 to 20 percent; Includes polished intake tube, red super flow high performance air filter, full set of instructions, and all the necessary hardware for the product to be properly applied; Features 6061-T6 aluminum intake tube with silicone hose with Dupont Nomex reinforcement to provide stability during both extreme hot and cold conditions; Has CNC machined sensor fittings for a precise air and fuel ratio throughout the power curve; Its washable air filter is made of synthetic fiber that does not contain any oil; Designed to maximize air flow with its high gloss air horn that enables air to enter the intake chamber in a high velocity spiral motion; Provides stabilized intake function in times of unwanted stress during load through its TIG welded brackets used in conjunction with rubber vibration mount dampening; Easy bolt-on installation.

Type: Direct fit, 50-state legal

Quantity Sold: Sold individually

Part #: FUJIC3006S

FUJITA COLD AIR INTAKE

Fujita's cold air intake is designed to maximize air flow with its high gloss air horn that enables air to enter the intake chamber in a high velocity spiral motion. It provides stabilized intake function in times of unwanted stress during load through its TIG welded brackets used in conjunction with rubber vibration mount dampening.

Specifications

• Synthetic filter material
• Dry filter element
• Without heat shield
• Polished tube finish
• 6061-T6 aluminum tube material

Features

• Washable and reusable air filter

Notes

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Type: Direct fit, 49-state legal - no CA shipments

Quantity Sold: Sold individually

Part #: FUJCA-3005

FUJITA COLD AIR INTAKE -- 50-state legal; Increases horsepower by 15 to 20 percent; Includes polished intake tube, red super flow high performance air filter, full set of instructions, and all the necessary hardware for the product to be properly applied; Features 6061-T6 aluminum intake tube with silicone hose with Dupont Nomex reinforcement to provide stability during both extreme hot and cold conditions; Has CNC machined sensor fittings for a precise air and fuel ratio throughout the power curve; Its washable air filter is made of synthetic fiber that does not contain any oil; Designed to maximize air flow with its high gloss air horn that enables air to enter the intake chamber in a high velocity spiral motion; Provides stabilized intake function in times of unwanted stress during load through its TIG welded brackets used in conjunction with rubber vibration mount dampening; Easy bolt-on installation.

Type: Direct fit, 50-state legal

Quantity Sold: Sold individually

Warranty: 10-year Fujita limited warranty

Part #: FUJCA1928

FUJITA COLD AIR INTAKE -- 50-state legal; Increases horsepower by 15 to 20 percent; Includes wrinkle black intake tube, red super flow high performance air filter, full set of instructions, and all the necessary hardware for the product to be properly applied; Features 6061-T6 aluminum intake tube with silicone hose with Dupont Nomex reinforcement to provide stability during both extreme hot and cold conditions; Has CNC machined sensor fittings for a precise air and fuel ratio throughout the power curve; Its washable air filter is made of synthetic fiber that does not contain any oil; Designed to maximize air flow with its high gloss air horn that enables air to enter the intake chamber in a high velocity spiral motion; Provides stabilized intake function in times of unwanted stress during load through its TIG welded brackets used in conjunction with rubber vibration mount dampening; Easy bolt-on installation.

Type: Direct fit, 50-state legal

Quantity Sold: Sold individually

Warranty: 10-year Fujita limited warranty

Part #: FUJCA1928B