Scion xB Wiper Blade - Select Year

Position: Front
Direct Connect - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - 20" - 5 Door Hatchback - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side -Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Exc. Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Fastback Hatch - For OE blade only. This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. Some applications may also require trimming of the insert once it has been installed. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - FWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - GSI (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Hatchback - Hook Arm - Pin Arm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Late (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Premium (20") - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper t arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Winter (20") -

Position: Front
Micro Edge - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - 20 Inch (500 MM) - 20" - 5 Door Hatchback - 500mm - 500MM w/o Fin. - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Blade Length: 20" 500mm - Driver's Side -Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Exc. Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Fastback Hatch - For OE blade only. This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. Some applications may also require trimming of the insert once it has been installed. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - FWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - GSI (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Hatchback - Hook Arm - Pin Arm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Late (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Premium (20") - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper t arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Winter (20") -

Position: Front
Winter Blade - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - 20 Inch (500 MM) - 20" - 22 Inch (550mm) - 22 Inch (550mm) - Aftermarket blades have no provisions for air deflector used on the original blade
Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 22" 550mm - 5 Door Hatchback - 500mm - 500MM w/o Fin. - 530mm, 21" - 550mm - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Convertible Excel+ Blade Length: 21" 530mm - Driver's Side - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Blade Length: 20" 500mm - Driver's Side -Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side Excel+ Blade Length: 21" 530mm - Drivers Side 550mm - Exc. 1994 Convertible - Exc. Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Excel+ Blade Length: 21" 530mm - Fastback Hatch - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - FWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - GSI (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Hatchback - Hook Arm - Pin Arm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - If using Bosch blade 40 721, 43 000 adaptor may also be required (included with Bosch 40 921 blade). Adaptor not required with NPW blade 27-221. - JAPAN MADE MODELS ONLY - Late (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger Side Excel+ Blade Length: 21" 530mm - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger's Side - Coupe Excel+ Blade Length: 21" 530mm - Premium (20") - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper t arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - This is a 2-blade kit when sold by the dealer. As the Bosch blades we sell in place of this OE kit are sold individually, be sure to confirm the correct number of blades that the vehicle requires. - w/o Fin - Windshield
This is a 2-blade kit as sold by the dealer. As the Bosch blades we sell in place of the OE kit are SOLD INDIVIDUALLY, be sure to confirm the correct number of blades that the vehicle requires. - Winter (20") - Winter Blade -

Position: Front
Excel+ - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - 20 Inch (500 MM) - 20" - 5 Door Hatchback - 500mm - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Convertible Excel+ Blade Length: 21" 530mm - Driver's Side - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Blade Length: 20" 500mm - Driver's Side -Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side Excel+ Blade Length: 21" 530mm - Exc. Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Excel+ Blade Length: 21" 530mm - Fastback Hatch - For OE blade only. This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. Some applications may also require trimming of the insert once it has been installed. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - FWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - GSI (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Hatchback - Hook Arm - Pin Arm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Late (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger Side Excel+ Blade Length: 21" 530mm - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger's Side - Coupe Excel+ Blade Length: 21" 530mm - Premium (20") - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper t arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Winter (20") -

Position: Front
Evolution - - (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - 20" - 5 Door Hatchback - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Micro Edge Blade Length: 20" 500mm - Driver's Side -Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Exc. Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Fastback Hatch - For OE blade only. This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. Some applications may also require trimming of the insert once it has been installed. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - FWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - GSI (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Hatchback - Hook Arm - Pin Arm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Late (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Premium (20") - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper t arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Winter (20") -

Position: Front
- (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - 20 Inch (500 MM) - 20" - 5 Door Hatchback - 500mm - 500MM w/o Fin. - Convertible (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Driver's Side -Sedan (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Exc. Cobra (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Fastback Hatch - For OE blade only. This is the rubber wiping element for the OE wiper blade only. The metal tension strips will need to be removed from the old insert and correctly aligned in the new insert before it can be installed on the old wiper blade assembly. Some applications may also require trimming of the insert once it has been installed. For those who prefer a simpler alternative, we also offer the complete blade assembly from Bosch, Denso, or NWB at slight additional cost. - Front & Rear (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - FWD (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - GSI (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Hatchback - Hook Arm - Pin Arm (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Late (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenge's Side - Right Side - Passenger Side - Passenger Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Passenger's Side - Passenger's Side (1) Wiper insert complete w/Blade (Individually Sold) Excel+ Blade Length: 20" 500mm - Premium (20") - The OE blade uses an offset hook mount. The Bosch, Denso, and NWB blades that we offer do not have this offset mount but can be used satifactorily. During installation of the Bosch, Denso, or NWB blade, loosen the wiper t arm retaining nut to allow for easier installation, reposition the wiper arm/blade assembly as necessary once installation is complete, and then tighten the wiper arm retaining nut. - Winter (20") -