Subaru Loyale Axle Shaft Assembly - Select Year

Position: Front
Remanufactured - - 3-Speed & 23 Spline Inboard Joint - Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY. -

Position: Front
- 3-Speed & 23 Spline Inboard Joint - Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!! - Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY. - w/ Carburated Engine Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!! - w/ Fuel Injected Engine Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!! -

Position: Front
- 3-Speed & 23 Spline Inboard Joint - Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!! - Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY. - w/ Carburated Engine Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!! - w/ Fuel Injected Engine Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!! -

Position: Front
23 Spline I.B. - - 3-Speed & 23 Spline Inboard Joint - Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!! - Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY. - w/ Carburated Engine Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!! - w/ Fuel Injected Engine Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!! -

Position: Front
23 Spline I.B. - - 3-Speed & 23 Spline Inboard Joint - Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!! - Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY. - w/ Carburated Engine Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!! - w/ Fuel Injected Engine Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!! -

Position: Front
25 Spline I.B. - - Remanufactured - Remanufactured - w/ 4-Speed - 25-Spline Inboard Joint -