Toyota Avalon Oxygen Sensor - Select Year
Toyota Avalon SNG Oxygen Sensor
| ||
Price: $35.47 List Price: Quantity:  According to Volvo Cars of North America, Inc., in order to prevent contamination from reaching the probe's reference air, new routing has been developed for sensor wiring. If one oxygen sensor is replaced, the new Oxygen Sensor Cable must be installed for both sensors. new Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. new Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. If " Factory Code " is needed, you must look at the Product/ ID plate : looking from left to right on the 1st line, this code is in the 5th position. After Catalyst According to Volvo Cars of North America, Inc., in order to prevent contamination from reaching the probe's reference air, new routing has been developed for sensor wiring. If one oxygen sensor is replaced, the new Oxygen Sensor Cable must be installed for both sensors. new Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. new Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. - After Catalyst - w/ Factory Code #1 If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. If " Factory Code " is needed, you must look at the Product/ ID plate : looking from left to right on the 1st line, this code is in the 5th position. After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. - After Catalyst - w/ Factory Code #2 According to Volvo Cars of North America, Inc., in order to prevent contamination from reaching the probe's reference air, new routing has been developed for sensor wiring. If one oxygen sensor is replaced, the new Oxygen Sensor Cable must be installed for both sensors. new Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. new Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. If " Factory Code " is needed, you must look at the Product/ ID plate : looking from left to right on the 1st line, this code is in the 5th position. After Catalyst According to Volvo Cars of North America, Inc., in order to prevent contamination from reaching the probe's reference air, new routing has been developed for sensor wiring. If one oxygen sensor is replaced, the new Oxygen Sensor Cable must be installed for both sensors. new Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. new Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. - After Catalyst - w/ Factory Code #2 If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. If " Factory Code " is needed, you must look at the Product/ ID plate : looking from left to right on the 1st line, this code is in the 5th position. After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. - After Catalyst According to Volvo Cars of North America, Inc., in order to prevent contamination from reaching the probe's reference air, new routing has been developed for sensor wiring. If one oxygen sensor is replaced, the new Oxygen Sensor Cable must be installed for both sensors. new Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. new Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. - After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. - After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. - After Catalyst Before Catalysts are Air-Fuel Ratio Sensors 89467-xxxxx - After Catalyst Do NOT mistake this for the Air/Fuel Ratio sensor 89467-71020 Warrenty will be voided - After Catalyst Right - At Exhaust Manifold. Cylinders 1-2-3 only - At Exhaust Manifold. Cylinders 1-2-3 only. - At front exhaust manifold outlet (passenger compartment side). - Before Cat. OE Style. Screw-in type - Before Catalyst - Before Catalyst - If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. - Before Catalyst - 1100mm Wire - Before Catalyst - Up to Chassis # X2020000 & Chassis # X7020000 - Before Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. - Before Catalyst O2 sensor located in front ( radiator side ) manifold. - Before Catalyst O2 sensor located in rear ( firewall side ) manifold. - Before/ After Catalytic - Behind Catalyst - 1100mm Wire - California - Do not use this for the Air/Fuel mixture ratio sensor, 89467-xxxxx. Warranty will be voided. - Exc. California - For exhaust manifold 4-5-6 ONLY. - For exhaust manifold 4/5/6 ONLY. - Front & Rear - Front - 2 Required Rear - 2 Required - In Front of Catalyst - 1100mm Wire - JAPAN MADE MODELS. After Cat. Sensor #2 - JAPAN MADE MODELS. After Cat. Sensor #2. - OE Style - OE Style - 4-Wire - OE Style - At Pipe - OE Style - California - OE Style 4-Wire Rear of Catalyst - OE Style Front at Pipe California - On Center Exhaust Manifold Pipe - After Cat - On Exaust Pipe. - On Exhaust Manifold - On exhaust pipe - On Exhaust Pipe - Before Catalyst - On exhaust pipe. - Universal Type - After Catalyst The submersible Bosch patented* connection system has undergone rigorous quality testing to USCAR standards. Tests have proven that this watertight system protects against contaminaiton and withstands the effects of extreme temperatures and engine vibration. User friendly instructions, No special tools are required to install. Just strip wires & go! Specially designed heat resistant - Posi-Lock connectors can easily be taken apart and recon- nected in case of wiring mistake. - Universal Type - After Catalyst The submersible Bosch patented* connection system has undergone rigorous quality testing to USCAR standards. Tests have proven that this watertight system protects against contaminaiton and withstands the effects of extreme temperatures and engine vibration. User friendly instructions, No special tools are required to install. Just strip wires & go! Specially designed heat resistant - Posi-Lock connectors can easily be taken apart and recon- nected in case of wiring mistake. Can use sensor with longer wire harness - see Technical Information pages - Universal Type - After Catalyst The submersible Bosch patented* connection system has undergone rigorous quality testing to USCAR standards. Tests have proven that this watertight system protects against contaminaiton and withstands the effects of extreme temperatures and engine vibration. User friendly instructions, No special tools are required to install. Just strip wires & go! Specially designed heat resistant - Posi-Lock connectors can easily be taken apart and recon- nected in case of wiring mistake. Can use sensor with longer wire harness, see Technical Information - w/ Regulated Catalyst - | ||
 Fits the following Toyota Avalon submodels
| ||
Toyota Avalon SNG Oxygen Sensor
| ||
Price: $35.47 List Price: Quantity: According to Volvo Cars of North America, Inc., in order to prevent contamination from reaching the probe's reference air, new routing has been developed for sensor wiring. If one oxygen sensor is replaced, the new Oxygen Sensor Cable must be installed for both sensors. new Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. new Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. If " Factory Code " is needed, you must look at the Product/ ID plate : looking from left to right on the 1st line, this code is in the 5th position. After Catalyst According to Volvo Cars of North America, Inc., in order to prevent contamination from reaching the probe's reference air, new routing has been developed for sensor wiring. If one oxygen sensor is replaced, the new Oxygen Sensor Cable must be installed for both sensors. new Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. new Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. - After Catalyst - w/ Factory Code #1 If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. If " Factory Code " is needed, you must look at the Product/ ID plate : looking from left to right on the 1st line, this code is in the 5th position. After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. - After Catalyst - w/ Factory Code #2 According to Volvo Cars of North America, Inc., in order to prevent contamination from reaching the probe's reference air, new routing has been developed for sensor wiring. If one oxygen sensor is replaced, the new Oxygen Sensor Cable must be installed for both sensors. new Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. new Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. If " Factory Code " is needed, you must look at the Product/ ID plate : looking from left to right on the 1st line, this code is in the 5th position. After Catalyst According to Volvo Cars of North America, Inc., in order to prevent contamination from reaching the probe's reference air, new routing has been developed for sensor wiring. If one oxygen sensor is replaced, the new Oxygen Sensor Cable must be installed for both sensors. new Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. new Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. - After Catalyst - w/ Factory Code #2 If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. If " Factory Code " is needed, you must look at the Product/ ID plate : looking from left to right on the 1st line, this code is in the 5th position. After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. - After Catalyst According to Volvo Cars of North America, Inc., in order to prevent contamination from reaching the probe's reference air, new routing has been developed for sensor wiring. If one oxygen sensor is replaced, the new Oxygen Sensor Cable must be installed for both sensors. new Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. new Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. - After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. - After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. After Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. - After Catalyst Before Catalysts are Air-Fuel Ratio Sensors 89467-xxxxx - After Catalyst Do NOT mistake this for the Air/Fuel Ratio sensor 89467-71020 Warrenty will be voided - After Catalyst Right - At Exhaust Manifold. Cylinders 1-2-3 only - At Exhaust Manifold. Cylinders 1-2-3 only. - At front exhaust manifold outlet (passenger compartment side). - Before Cat. OE Style. Screw-in type - Before Catalyst - Before Catalyst - If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. - Before Catalyst - 1100mm Wire - Before Catalyst - Up to Chassis # X2020000 & Chassis # X7020000 - Before Catalyst If the cable on the new Oxygen Sensor you purchase is too short, it may be necessary to purchase longer cables as follows : Longer Oxygen Sensor Cable for " Before Catalyst " Oxygen Sensor = 9202714. Longer Oxygen Sensor Cable for " After Catalyst " Oxygen Sensor = 9202715. This modification was done to prevent contamination, Volvo moved the location of the plug up higher in the vehicle. - Before Catalyst O2 sensor located in front ( radiator side ) manifold. - Before Catalyst O2 sensor located in rear ( firewall side ) manifold. - Before/ After Catalytic - Behind Catalyst - 1100mm Wire - California - Do not use this for the Air/Fuel mixture ratio sensor, 89467-xxxxx. Warranty will be voided. - Exc. California - For exhaust manifold 4-5-6 ONLY. - For exhaust manifold 4/5/6 ONLY. - Front & Rear - Front - 2 Required Rear - 2 Required - In Front of Catalyst - 1100mm Wire - JAPAN MADE MODELS. After Cat. Sensor #2 - JAPAN MADE MODELS. After Cat. Sensor #2. - OE Style - OE Style - 4-Wire - OE Style - At Pipe - OE Style - California - OE Style 4-Wire Rear of Catalyst - OE Style Front at Pipe California - On Center Exhaust Manifold Pipe - After Cat - On Exaust Pipe. - On Exhaust Manifold - On exhaust pipe - On Exhaust Pipe - Before Catalyst - On exhaust pipe. - Universal Type - After Catalyst The submersible Bosch patented* connection system has undergone rigorous quality testing to USCAR standards. Tests have proven that this watertight system protects against contaminaiton and withstands the effects of extreme temperatures and engine vibration. User friendly instructions, No special tools are required to install. Just strip wires & go! Specially designed heat resistant - Posi-Lock connectors can easily be taken apart and recon- nected in case of wiring mistake. - Universal Type - After Catalyst The submersible Bosch patented* connection system has undergone rigorous quality testing to USCAR standards. Tests have proven that this watertight system protects against contaminaiton and withstands the effects of extreme temperatures and engine vibration. User friendly instructions, No special tools are required to install. Just strip wires & go! Specially designed heat resistant - Posi-Lock connectors can easily be taken apart and recon- nected in case of wiring mistake. Can use sensor with longer wire harness - see Technical Information pages - Universal Type - After Catalyst The submersible Bosch patented* connection system has undergone rigorous quality testing to USCAR standards. Tests have proven that this watertight system protects against contaminaiton and withstands the effects of extreme temperatures and engine vibration. User friendly instructions, No special tools are required to install. Just strip wires & go! Specially designed heat resistant - Posi-Lock connectors can easily be taken apart and recon- nected in case of wiring mistake. Can use sensor with longer wire harness, see Technical Information - w/ Regulated Catalyst - | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon SNG Oxygen Sensor
| ||
Price: $56.45 List Price: Quantity: | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon SNG Oxygen Sensor
| ||
Price: $56.45 List Price: Quantity: | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon SNG Oxygen Sensor
| ||
Price: $56.45 List Price: Quantity: | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon SNG Oxygen Sensor
| ||
Price: $56.45 List Price: Quantity: Direct Fit - - (After Catalyst) - 4-Wire - Rear of Catalyst - After Catalyst - After Catalyst - California 4 wire - After Catalyst 4 wire - After Catalyst 4 wire This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - After catalyst. - California spec. After Cat. Sensor #1 - JAPAN MADE MODELS. California spec. After Cat. Sensor #1 - JAPAN MADE MODELS. California specification. Before Cat. Sensor #1 - OE Style 4-Wire Rear of Catalyst - Rear of Catalyst - | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon SNG Oxygen Sensor
| ||
Price: $56.45 List Price: Quantity: | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon Denso Oxygen Sensor
| ||
Price: $56.52 List Price: Quantity: Universal - - (#1) For exhaust manifold 1/2/3 ONLY. - (#2) For exhaust manifold 1/2/3 ONLY. - 4-Wire - Rear of Catalyst - After Cat. Sensor #2. - After catalyst - After Catalyst - California O2 sensor located in front ( radiator side ) exhaust pipe. - At Exhaust Manifold. Cylinders 1-2-3 only - At Exhaust Manifold. Cylinders 1-2-3 only. - At front exhaust manifold outlet (passenger compartment side). - Before Cat. OE Style. Screw-in type - Before Catalyst - Before Catalyst O2 sensor located in front ( radiator side ) manifold. - Before Catalyst O2 sensor located in rear ( firewall side ) manifold. - For exhaust manifold 4-5-6 ONLY. - For exhaust manifold 4/5/6 ONLY. - JAPAN MADE MODELS. After Cat. Sensor #2. - OE Style - OE Style - 4-Wire - OE Style - At Pipe - OE Style - California - OE Style 4-Wire Rear of Catalyst - OE Style Front at Pipe California - On Center Exhaust Manifold Pipe - After Cat - On Exaust Pipe. - On Exhaust Manifold - On exhaust pipe - On exhaust pipe. - | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon Denso Oxygen Sensor
| ||
Price: $56.52 List Price: Quantity: Universal - - (#1) For exhaust manifold 1/2/3 ONLY. - (#2) For exhaust manifold 1/2/3 ONLY. - 4-Wire - Rear of Catalyst - After Cat. Sensor #2. - After catalyst - After Catalyst - California O2 sensor located in front ( radiator side ) exhaust pipe. - At Exhaust Manifold. Cylinders 1-2-3 only - At Exhaust Manifold. Cylinders 1-2-3 only. - At front exhaust manifold outlet (passenger compartment side). - Before Cat. OE Style. Screw-in type - Before Catalyst - Before Catalyst O2 sensor located in front ( radiator side ) manifold. - Before Catalyst O2 sensor located in rear ( firewall side ) manifold. - For exhaust manifold 4-5-6 ONLY. - For exhaust manifold 4/5/6 ONLY. - JAPAN MADE MODELS. After Cat. Sensor #2. - OE Style - OE Style - 4-Wire - OE Style - At Pipe - OE Style - California - OE Style 4-Wire Rear of Catalyst - OE Style Front at Pipe California - On Center Exhaust Manifold Pipe - After Cat - On Exaust Pipe. - On Exhaust Manifold - On exhaust pipe - On exhaust pipe. - | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon SNG Oxygen Sensor
| ||
Price: $59.90 List Price: Quantity: Before Catalysts are Air-Fuel Ratio Sensors 89467-xxxxx - Before Cat - Before Catalyst - Below Front Bank Header Pipe - After Catalyst Do not confuse this w/ the air fuel mixture ratio sensor, which is used for BEFORE cat. - For exhaust manifold 4/5/6 ONLY. - JAPAN MADE MODELS. After Cat. Sensor #2 - NORTH AMERICAN MADE MODELS. After Cat. Sensor #2 - | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon Bosch Oxygen Sensor
| ||
Price: $80.41 List Price: Quantity: | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon Denso Oxygen Sensor
| ||
Price: $105.88 List Price: Quantity: - 4-Wire - Rear of Catalyst - After Catalyst - After Catalyst 4 wire This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - After catalyst. - OE Style 4-Wire Rear of Catalyst - Rear of Catalyst - | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon Denso Oxygen Sensor
| ||
Price: $105.88 List Price: Quantity: - 4-Wire - Rear of Catalyst - After Catalyst - After Catalyst 4 wire This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - After catalyst. - OE Style 4-Wire Rear of Catalyst - Rear of Catalyst - | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon Denso Oxygen Sensor
| ||
Price: $105.88 List Price: Quantity: - 4-Wire - Rear of Catalyst - After Catalyst - After Catalyst 4 wire This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - After catalyst. - OE Style 4-Wire Rear of Catalyst - Rear of Catalyst - | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon Denso Oxygen Sensor
| ||
Price: $105.88 List Price: Quantity: Position: Rear - 4-Wire - Rear of Catalyst - After Catalyst - After Catalyst 4 wire This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - After catalyst. - OE Style 4-Wire Rear of Catalyst - Rear of Catalyst - | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon Denso Oxygen Sensor
| ||
Price: $105.88 List Price: Quantity: - 4-Wire - Rear of Catalyst - After Catalyst - After Catalyst 4 wire This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - After catalyst. - OE Style 4-Wire Rear of Catalyst - Rear of Catalyst - | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon Denso Oxygen Sensor
| ||
Price: $108.21 List Price: Quantity: Position: Front After Catalyst. OE style - All regions. After Catalyst. - Before Catalyst - Before Catalyst - California - Before Catalyst - Made by Denso Japan. - Before Catalyst - One per bank. - Before Catalyst - One per bank. This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - Before Catalyst DO NOT confuse with Air Fuel Ratio Sensor 89467-xxxxx - California specification. After Catalyst. This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - Excluding California - Excluding California Before Catalyst DO NOT confuse with Air Fuel Ratio Sensor 89467-xxxxx - Japan made Models - Before Catalyst - DON'T CONFUSE w/ THE AIR FUEL RATIO SENSOR!! - NORTH AMERICAN made Models - Before Catalyst - DON'T CONFUSE w/ THE AIR FUEL RATIO SENSOR!! - Marked 89465-33180 or 89465-06030. - NORTH AMERICAN MADE MODELS w/ label #89465-06080. This should NOT be mistaken for a Air-Fuel Ratio Sensor (#89467-xxxxx). - OE Style - Front of Catalyst - Exc. California 4 wire This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - OE Style - Front of Catalyst 4 wire This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - OE Style. 4 wire This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - | ||
Fits the following Toyota Avalon submodels
| ||
Toyota Avalon Denso Oxygen Sensor
| ||
Price: $108.21 List Price: Quantity: After Catalyst. OE style - All regions. After Catalyst. - Before Catalyst - Before Catalyst - California - Before Catalyst - Made by Denso Japan. - Before Catalyst - One per bank. - Before Catalyst - One per bank. This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - Before Catalyst DO NOT confuse with Air Fuel Ratio Sensor 89467-xxxxx - California specification. After Catalyst. This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - Excluding California - Excluding California Before Catalyst DO NOT confuse with Air Fuel Ratio Sensor 89467-xxxxx - Japan made Models - Before Catalyst - DON'T CONFUSE w/ THE AIR FUEL RATIO SENSOR!! - NORTH AMERICAN made Models - Before Catalyst - DON'T CONFUSE w/ THE AIR FUEL RATIO SENSOR!! - Marked 89465-33180 or 89465-06030. - NORTH AMERICAN MADE MODELS w/ label #89465-06080. This should NOT be mistaken for a Air-Fuel Ratio Sensor (#89467-xxxxx). - OE Style - Front of Catalyst - Exc. California 4 wire This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - OE Style - Front of Catalyst 4 wire This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - OE Style. 4 wire This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - This is NOT an Air-Ratio Sensor. Does NOT replace units with OEM numbers beginning 89467-xxxxx. If connector does not match do not install. - | ||
Fits the following Toyota Avalon submodels
| ||
