Toyota Camry Catalytic Converter

Eastern ECO II 49-State Catalytic Converter

The ECO II Catalytic Converter from Eastern features greater loadings of precious metals - leading to better catalytic efficiency. This product is ideal to use on vehicles with complex or OBD II systems.

Eastern is one of the top manufacturers of catalytic converters, incorporating exclusive and sophisticated research and development to assure that only the best goes into the market.

Specifications:

• 14 in. overall length
• 2.5 in. inlet/outlet size
• Oval body

Series: Eastern Standard

Emissions: 49-state Legal - No CA Shipments

Product Fit: Minor Modifications Required

Quantity Sold: Sold Individually

Tube Material: Aluminized Steel

Anticipated Ship Out Time: 1-2 Business Days

Dimensions: 10 In. L X 6 In. W X 4.25 In. H, 14 In. Overall Length

EASTERN CATALYTIC CONVERTER

Eastern catalytic converters are constructed using Eastern's proprietary NANO technology chemistry that yields highly efficient loadings for lower cost and better converter efficiency. It features high flow design that maximizes engine output and catalytic efficiency.

Specifications

• 3-way catalyst style
• 6,000 lbs. GVW
• 2 in. inlet
• 2 in. outlet
• Single center inlet and outlet configuration
• 10 in. L x 5 in. W x 5 in. H, 14 in. overall length
• Round casing
• With one angled oxygen sensor
• Without air tube provision

Notes

• 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
• Non-directional and can be installed either way
• Modification of the exhaust is required

Series: Eastern Standard

Location: Rear

Emissions: 49-state Legal - No CA Shipments

Product Fit: Minor Modifications Required

Quantity Sold: Sold Individually

Tube Material: Aluminized Steel

Anticipated Ship Out Time: 1-2 Business Days

EASTERN CATALYTIC CONVERTER

Eastern catalytic converters are constructed using Eastern's proprietary NANO technology chemistry that yields highly efficient loadings for lower cost and better converter efficiency. It features high flow design that maximizes engine output and catalytic efficiency.

Specifications

• 3-way catalyst style
• 6,000 lbs. GVW
• 2.25 in. inlet
• 2.25 in. outlet
• Single center inlet and outlet configuration
• 10 in. L x 6 in. W x 4.25 in. H, 14 in. overall length
• Oval casing
• Without oxygen sensor port and air tube provision

Notes

• 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
• Non-directional and can be installed either way
• Modification of the exhaust is required

Series: Eastern Standard

Location: Rear

Emissions: 49-state Legal - No CA Shipments

Product Fit: Minor Modifications Required

Quantity Sold: Sold Individually

Tube Material: Aluminized Steel

Anticipated Ship Out Time: 1-2 Business Days

CATCO PRE-CAT 6500 SERIES CATALYTIC CONVERTER

Catco's Pre-Cat 6500 series catalytic converters are designed with 409 stainless steel pipes and shell for longer life.

Specifications

• 5-bolt flange welded inlet
• 3-bolt flange welded outlet
• Oval body
• 5.625 in. overall length
• Single inlet and outlet configuration

Notes

49-state legal; Not for sale or use in California; Cannot be shipped to California addresses

Series: Catco Pre-Cat 6500

Emissions: 49-state Legal - No CA Shipments

Product Fit: OE Replacement

Quantity Sold: Sold Individually

Tube Material: Stainless Steel

Anticipated Ship Out Time: 1-2 Business Days

Catalyst Substrate Material: Ceramic Honeycomb

MAGNAFLOW CATALYTIC CONVERTER

Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond. Designed to exact original equipment specifications.

Specifications

• 3-way catalyst style
• Flange inlet
• Flange outlet
• Round body

Notes

• Direct fit catalytic converter legal for sale in California under Executive Order (EO) number D-193-86. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
• May require additional welding for optimal installation

Series: Magnaflow 50-State Direct-Fit

Emissions: 50-state Legal

Product Fit: Direct Fit

Quantity Sold: Assembly

Tube Material: Stainless Steel

EO Number: D-193-86, D-193-84

Anticipated Ship Out Time: 1-2 Business Days

MAGNAFLOW 46000 SERIES CATALYTIC CONVERTER

This is the first series of a new line of catalytic converters designed for use on vehicles equipped with Second Generation On-Board Diagnostic systems. Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond. Catalyst system monitor advanced response technology.

Specifications

• 3-way catalyst style
• Round body
• One unit may cover a wide variety of vehicle makes and models
• 9 in. L x 5.13 in. W, 13 in. overall length
• 2.25 in. inlet diameter
• 2.25 in. outlet diameter
• Single inlet and outlet configuration

Notes

• Universal catalytic converter legal for sale in California under Executive Order (EO) number D-193-67. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
• May require additional welding for optimal installation

Series: Magnaflow 50-State Semi-Universal

Emissions: 50-state Legal

Product Fit: Minor Modifications Required

Quantity Sold: Sold Individually

Tube Material: Stainless Steel

EO Number: D-193-67, D-193-89

Anticipated Ship Out Time: 1-2 Business Days

MAGNAFLOW 46000 SERIES CATALYTIC CONVERTER

This is the first series of a new line of catalytic converters designed for use on vehicles equipped with Second Generation On-Board Diagnostic systems. Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond. Catalyst system monitor advanced response technology.

Specifications

• 3-way catalyst style
• Round body
• One unit may cover a wide variety of vehicle makes and models
• 9 in. L x 5.13 in. W, 13 in. overall length
• 2.25 in. inlet diameter
• 2.25 in. outlet diameter
• Single inlet and outlet configuration

Notes

• Universal catalytic converter legal for sale in California under Executive Order (EO) number D-193-67. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
• May require additional welding for optimal installation

Series: Magnaflow 50-State Semi-Universal

Location: Front

Emissions: 50-state Legal

Product Fit: Minor Modifications Required

Quantity Sold: Sold Individually

Tube Material: Stainless Steel

EO Number: D-193-67, D-193-89

Eastern ECO II Series Catalytic Converter

30 years of innovation is proof enough that Eastern is the best manufacturer of the finest aftermarket and original equipment catalytic converters on the market. Their ECO Series Catalytic Converters which are designed to help keep the Check Engine Light (MIL) off is another set of catalytic converters with world class quality.

The Eastern ECO II Series Catalytic Converter is made specifically for most complex or second generation on board diagnostic (OBD II) systems. It features wash coats with greater loadings of precious metals to handle applications with ultra low emissions, higher than normal emissions, as well as vehicles with higher mileage and heavier workloads.

The Eastern ECO II Series Catalytic Converter's features in a nutshell:

• Engineered with Eastern's proprietary NANO technology yielding highly efficient loadings for lower cost and better converter efficiency
• Features an advanced materials design for maximum engine output and performance

Specifications:

• 3-way catalyst style
• 6-bolt welded type inlet
• 2-bolt welded type outlet
• 12 in. overall length
• With capped air tube provision and one 18 mm style oxygen sensor port
• Manifold type assembly with one catalytic converter
• Round body
• 3-1 inlet and single outlet configuration

Notes:

• 49-state legal; Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Series: Eastern ECO II

Emissions: 49-state Legal - No CA Shipments

Product Fit: Direct Fit

Quantity Sold: Sold Individually

Tube Material: Aluminized Steel

Anticipated Ship Out Time: 1-2 Business Days

Catalyst Substrate Material: Ceramic Honeycomb

CATCO CATALYTIC CONVERTER ASSEMBLY

Catco catalytic converters are designed with 409 stainless steel pipes and shell for longer life.

Specifications

• 2-bolt welded flange with gasket stub inlet
• 2-bolt welded flange with gasket stub outlet
• Standard assembly with one catalytic converter
• Round body
• 50.75 in. overall length
• 2-1 inlet and single outlet configuration

Notes

49-state legal; Not for sale or use in California; Cannot be shipped to California addresses

Emissions: 49-state Legal - No CA Shipments

Product Fit: OE Replacement

Quantity Sold: Sold Individually

Tube Material: Stainless Steel

Anticipated Ship Out Time: 1-2 Business Days

Catalyst Substrate Material: Ceramic Honeycomb

Dimensions: 50.75 In. Overall Length

BOSAL CATALYTIC CONVERTER

Bosal catalytic converters are made to fit vehicle-specific requirements for backpressure, emissions, sound levels, and sensors. Designed and built for long life reliability.

Specifications

• Flange inlet
• Flange outlet
• Round body
• 15 in. L x 7 in. W x 7 in. H
• Single inlet and outlet configuration

Notes

• 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses

Location: Front

Emissions: 49-state Legal - No CA Shipments

Product Fit: OE Replacement

Quantity Sold: Sold Individually

Tube Material: Aluminized Steel

Anticipated Ship Out Time: 1-2 Business Days

Dimensions: 15 X 7 X 7 In.