Alum/Plastic - w/Switch - No Filler Neck - 3-Row All of the Volvo radiators offered are designed to withstand system pressures much higher than the 150kPa that is the maximum specified by Volvo. However, defective pressure caps or hose blockages can cause the pressure to exceed the radiator's designed limit, leading to damage of the radiator or the engine. ALWAYS check the rest of the cooling system for problems before assuming the job is complete. We recommend the installation of a NEW pressure cap whenever a radiator is being replaced. - Please note : The Nissens Brand Radiator comes with the Fan Switch, the OES brand does not, if needed, please order 1274962 - Switch and 1378869-Bushing separately. Please also note that on the Nissens Brand Radiator you will find small cuts on the sideplates, per Nissens " The cuts in the sideplates are part of the production process, to make the radiators more resistant to vibrations. By adding these cuts, on specific applications/vehicles where vibrations were reported as a problem, we can increase the average life of the radiators." All of the Volvo radiators offered are designed to withstand system pressures much higher than the 150kPa that is the maximum specified by Volvo. However, defective pressure caps or hose blockages can cause the pressure to exceed the radiator's designed limit, leading to damage of the radiator or the engine. ALWAYS check the rest of the cooling system for problems before assuming the job is complete. We recommend the installation of a NEW pressure cap whenever a radiator is being replaced. -
