Volvo C70 Motor Mount - Select Year

Standard - For Torque Stabilizer Mount - This Bushing along with VR583 is designed to replace the actual center bushing in the Early Design Mount which has a Round Hole, these will NOT work in the Late Design Mount which has a Square Hole . You may use either bushing (VU535 or VR583) in the Early Design Mount. VU535 uses Urethane and is a 2-piece unit, so it can be installed without having to press it in. VR583 uses the Standard Rubber material and is 1-piece unit, so it needs to be pressed in. - Torque Arm - This Bushing along with VR583 is designed to replace the actual center bushing in the Early Design Mount which has a Round Hole, these will NOT work in the Late Design Mount which has a Square Hole . You may use either bushing (VU535 or VR583) in the Early Design Mount. VU535 uses Urethane and is a 2-piece unit, so it can be installed without having to press it in, VR583 uses the Standard Rubber material and is 1-piece unit, so it needs to be pressed in. - Torque Stabilizer - Torque Stabilizer
w/ Factory Code #1 - If " Factory Code " is needed, you must look at the Product/ ID plate looking from left to right on the 1st line, this code is in the 5th position. - Torque Stabilizer
w/ Factory Code #2 - If " Factory Code " is needed, you must look at the Product/ ID plate looking from left to right on the 1st line, this code is in the 5th position. Some customers have reported greater success using the later-style, square hole design mount, part number 30680770, although the appearance may differ (square hole versus round hole), these should work, but may require minor modifications. -

Position: Right
- w/ 16" Wheels/ 302mm (12") O.D. Brake Disc -

Position: Front
-

Quality: OEM
Position: Right
- w/ 16" Wheels/ 302mm (12") O.D. Brake Disc -

Position: Right
Coupe - w/ 16" Wheels/ 302mm (12") O.D. Brake Disc -

Quality: OEM
Position: Rear
-

Position: Right
- w/ 16" Wheels/ 302mm (12") O.D. Brake Disc -

Quality: OEM
Position: Front
-

Position: Right
-